Originally Posted by thlnk3r
Godofdeath, welcome to Overclock.net
I apologize for the late response. Which guide did you read? Perhaps if you have some questions about some key points maybe we can elaborate on them for you?
The basic thing to start with is by increasing the HT Clock speed (reference clock speed). The stock speed is 200Mhz. By increasing this you will also increase the cpu frequency (this is assuming you left the cpu multiplier at stock). Here is a basic basic basic guide on starting with S754/S939 overclocking. Perhaps this may be more helpful: http://tech.icrontic.com/articles/ov...54939_platform
Hopefully a few others may have some suggestions/tips for you soon.
Let us know if you have more questions
Ok went into the bios a bit
Saw that the mutiplier and frequency thing under the Jumper part.
I went through the multiplier and the highest is at 11 and is default I think.
So I would have to increase frequency.
Now do I have to change the voltage also, I see it on AUTO right now.
Also after reading that article, what's the HTT bus? And do I have to do the overclocking memory also?
If anything my memory numbers is for the 512mb 2.5-3-3-8 and for the 1gb 3-3-3-8
ThanksEdited by godofdeath - 12/9/09 at 1:35pm