Overclock.net › Forums › AMD › AMD - General › The Socket 939 Appreciation Club and Knowledgebase [Official]
New Posts  All Forums:Forum Nav:

The Socket 939 Appreciation Club and Knowledgebase [Official] - Page 2223

post #22221 of 28692
Quote:
Originally Posted by ny_driver View Post
Award bios? Here are the beep codes for Award, phoenix and AMI.
I don't know what the leds mean, but are there beeps.....do you have the speaker hooked up? Try looking here...... http://www.helpwithpcs.com/upgrading...beep-codes.htm

If I find anything on the leds I'll let you know. I could never read the leds on the pci led card on my board anyways...the beeps, however, are simple.

EDIT:...I think this may be what you asked for initially.....http://csd.dficlub.org/forum/showthread.php?t=8603 ........hope it helps.
Thanks for the links ny_driver. Although, the board doesn't have a display for LED codes, there are 4 debug LEDs that the board uses for its POST. All 4 light up then 1 by 1 they go out. Well mine stops when there's one. I believe that it has something to do with the GPU, but I'm not 100% positive. I think I might pull out both of the GSO's and clean the slots/gold fingers on the PCB and check the SLI jumpers, one be might be bad.
Man I really want to get that other rig going, the heat needs help (sucks in that area of the house), and 2 folding rigs really provide a good amount of heat while helping humanity.


Side note, weird thing is, I just tested this board out not more than a couple of weeks ago and it worked just fine.
Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-Vpro Evga 780 Classified Crucial Ballistix 
Hard DriveHard DriveOptical DriveCooling
A-Data 128GB SSD Samsung Spinpoint F3 1TB Pioneer BDR-207DBK Corsair H80 
OSMonitorKeyboardPower
Win 7 pro 64 Hannspree 25" 1080p LCD 2ms Razer Lycosa PC Power & Cooling 760w 
CaseMouseMouse PadAudio
Corsair 550D MX 518 Allsop Creative XFi Xtreme music 
  hide details  
Reply
Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-Vpro Evga 780 Classified Crucial Ballistix 
Hard DriveHard DriveOptical DriveCooling
A-Data 128GB SSD Samsung Spinpoint F3 1TB Pioneer BDR-207DBK Corsair H80 
OSMonitorKeyboardPower
Win 7 pro 64 Hannspree 25" 1080p LCD 2ms Razer Lycosa PC Power & Cooling 760w 
CaseMouseMouse PadAudio
Corsair 550D MX 518 Allsop Creative XFi Xtreme music 
  hide details  
Reply
post #22222 of 28692
Ok, so following my assumption that it in fact had to do with the GPU; I removed both GPUs and cleaned the gold-fingers on the primary card. Lo and behold, fires right up. Kept BSODing when I got to win login screen. Check all my settings, even though I had the battery out during assembly, come to find out it auto set my RAM to CAS 2.
Even though this RAM is supposed to run @ CAS 2, that's at 266. Set it to CAS 3, no more BSOD. Time to get rig 2 folding away .
Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-Vpro Evga 780 Classified Crucial Ballistix 
Hard DriveHard DriveOptical DriveCooling
A-Data 128GB SSD Samsung Spinpoint F3 1TB Pioneer BDR-207DBK Corsair H80 
OSMonitorKeyboardPower
Win 7 pro 64 Hannspree 25" 1080p LCD 2ms Razer Lycosa PC Power & Cooling 760w 
CaseMouseMouse PadAudio
Corsair 550D MX 518 Allsop Creative XFi Xtreme music 
  hide details  
Reply
Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-Vpro Evga 780 Classified Crucial Ballistix 
Hard DriveHard DriveOptical DriveCooling
A-Data 128GB SSD Samsung Spinpoint F3 1TB Pioneer BDR-207DBK Corsair H80 
OSMonitorKeyboardPower
Win 7 pro 64 Hannspree 25" 1080p LCD 2ms Razer Lycosa PC Power & Cooling 760w 
CaseMouseMouse PadAudio
Corsair 550D MX 518 Allsop Creative XFi Xtreme music 
  hide details  
Reply
post #22223 of 28692
What'd you use to clean it
790FXT
(13 items)
 
  
Reply
790FXT
(13 items)
 
  
Reply
post #22224 of 28692
Quote:
Originally Posted by ny_driver View Post
what memory(RAM) do you have and how many sticks, what are the stock timings, and what are the timings set to when you set it to DDR400?
Having more than 2 sticks of memory may cause it to run at a lower speed or not at all at certain speeds.
Looking at your system specs, I'd say to try 2 matching sticks of RAM, and only 2, if you want to overclock it. I'm here if you have any more questions.
Good Luck

i have ddr 400 i have 4 sticks 3*512 and 1*256 Mb accutally i didnt changed the timings because u wasnt sure what i was doing. 2*512mb ram was with computer but 2 others i buyed extra. timings for stock rams are : @200MHz 2,5-4-4-8 (cl-rcd-rp-ras)/12-14-2 (rc-rfc-rrd)
and two extra :
@ 200 MHz3.0-4-4-8 (CL-RCD-RP-RAS) / 12-14-2 (RC-RFC-RRD)
@ 166 MHz2.5-3-3-7 (CL-RCD-RP-RAS) / 10-12-2 (RC-RFC-RRD)
@ 133 MHz2.0-3-3-6 (CL-RCD-RP-RAS) / 8-10-2 (RC-RFC-RRD)
thisone is 256 MB
other last 512 :
@ 200 MHz3.0-3-3-8 (CL-RCD-RP-RAS) / 11-14-2 (RC-RFC-RRD)
@ 166 MHz2.5-3-3-7 (CL-RCD-RP-RAS) / 10-12-2 (RC-RFC-RRD)
@ 133 MHz2.0-2-2-6 (CL-RCD-RP-RAS) / 8-10-2 (RC-RFC-RRD)

as you can see i dont understand much about these timing. but seriously this is on part thats confusing me ( belive most important)

atm my system runs:
CPU Clock2300.8 MHz (original: 2000 MHz, overclock: 15%)
CPU Multiplier10.0x
CPU FSB230.1 MHz (original: 200 MHz, overclock: 15%)
HyperTransport Clock920.3 MHz
Memory Bus191.7 MHz
DRAM:FSB RatioCPU/12


Memory Timings2.5-4-4-7 (CL-RCD-RP-RAS)

DIMM1512 MB PC3200 DDR SDRAM (2.5-4-4-8 @ 200 MHz)
DIMM2512 MB PC3200 DDR SDRAM (2.5-4-4-8 @ 200 MHz)
DIMM3256 MB PC3200 DDR SDRAM (3.0-4-4-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-3-3-6 @ 133 MHz)
DIMM4: Hyundai HYMD264 646D8R-D43512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
so if you have some instrutrions to me if gladly follow them
cheese
(13 items)
 
  
CPUMotherboardGraphicsRAM
athlon x2 3800+ Gigabyte GA-K8N-SLI ATI Radeon X1600 XT ddr400 1024 MB 
Hard DriveOSMonitorPower
Maxtor 6V300F0 ATA 300GB windows 7 32 bit Samsung SyncMaster 788DF codegen 400W 
  hide details  
Reply
cheese
(13 items)
 
  
CPUMotherboardGraphicsRAM
athlon x2 3800+ Gigabyte GA-K8N-SLI ATI Radeon X1600 XT ddr400 1024 MB 
Hard DriveOSMonitorPower
Maxtor 6V300F0 ATA 300GB windows 7 32 bit Samsung SyncMaster 788DF codegen 400W 
  hide details  
Reply
post #22225 of 28692
Quote:
Originally Posted by playah View Post
What'd you use to clean it
A pencil eraser. It works great.
Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-Vpro Evga 780 Classified Crucial Ballistix 
Hard DriveHard DriveOptical DriveCooling
A-Data 128GB SSD Samsung Spinpoint F3 1TB Pioneer BDR-207DBK Corsair H80 
OSMonitorKeyboardPower
Win 7 pro 64 Hannspree 25" 1080p LCD 2ms Razer Lycosa PC Power & Cooling 760w 
CaseMouseMouse PadAudio
Corsair 550D MX 518 Allsop Creative XFi Xtreme music 
  hide details  
Reply
Black Box
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Asus P8Z77-Vpro Evga 780 Classified Crucial Ballistix 
Hard DriveHard DriveOptical DriveCooling
A-Data 128GB SSD Samsung Spinpoint F3 1TB Pioneer BDR-207DBK Corsair H80 
OSMonitorKeyboardPower
Win 7 pro 64 Hannspree 25" 1080p LCD 2ms Razer Lycosa PC Power & Cooling 760w 
CaseMouseMouse PadAudio
Corsair 550D MX 518 Allsop Creative XFi Xtreme music 
  hide details  
Reply
post #22226 of 28692
Quote:
Originally Posted by mcoil112 View Post
i have ddr 400 i have 4 sticks 3*512 and 1*256 Mb accutally i didnt changed the timings because u wasnt sure what i was doing. 2*512mb ram was with computer but 2 others i buyed extra. timings for stock rams are : @200MHz 2,5-4-4-8 (cl-rcd-rp-ras)/12-14-2 (rc-rfc-rrd)
and two extra :
@ 200 MHz3.0-4-4-8 (CL-RCD-RP-RAS) / 12-14-2 (RC-RFC-RRD)
@ 166 MHz2.5-3-3-7 (CL-RCD-RP-RAS) / 10-12-2 (RC-RFC-RRD)
@ 133 MHz2.0-3-3-6 (CL-RCD-RP-RAS) / 8-10-2 (RC-RFC-RRD)
thisone is 256 MB
other last 512 :
@ 200 MHz3.0-3-3-8 (CL-RCD-RP-RAS) / 11-14-2 (RC-RFC-RRD)
@ 166 MHz2.5-3-3-7 (CL-RCD-RP-RAS) / 10-12-2 (RC-RFC-RRD)
@ 133 MHz2.0-2-2-6 (CL-RCD-RP-RAS) / 8-10-2 (RC-RFC-RRD)

as you can see i dont understand much about these timing. but seriously this is on part thats confusing me ( belive most important)

atm my system runs:
CPU Clock2300.8 MHz (original: 2000 MHz, overclock: 15%)
CPU Multiplier10.0x
CPU FSB230.1 MHz (original: 200 MHz, overclock: 15%)
HyperTransport Clock920.3 MHz
Memory Bus191.7 MHz
DRAM:FSB RatioCPU/12


Memory Timings2.5-4-4-7 (CL-RCD-RP-RAS)

DIMM1512 MB PC3200 DDR SDRAM (2.5-4-4-8 @ 200 MHz)
DIMM2512 MB PC3200 DDR SDRAM (2.5-4-4-8 @ 200 MHz)
DIMM3256 MB PC3200 DDR SDRAM (3.0-4-4-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-3-3-6 @ 133 MHz)
DIMM4: Hyundai HYMD264 646D8R-D43512 MB PC3200 DDR SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
so if you have some instrutrions to me if gladly follow them
OK, start out by putting only the 2 matched 512mb sticks in there...take the rest out. Set you memory at the 133 divider with 3-4-4-8-1T timings. Then start overclocking the cpu by 5-10 MHz at a time, each time it posts test to see if the cpu is stable. For quick testing use s&m 1.9.1 which can be found here under stability testing.... http://www.overclock.net/amd-general...e-tools-3.html

In the "settings" tab set it like you see in the following picture. If it passes that test, you can probably go higher...5-10MHz at a time. If it fails the L1 cache test you probably need a little more voltage. I find that sometimes when it fails the L2 cache test more voltage can help. make sure you are monitoring your temperatures when you are testing. The L2 cache failure and FPU test failure are usually due to excessive heat, or just too high an overclock.
http://yfrog.com/3usmsettingstabp

You can get Core Temp at the same link under monitoring software. I assume you have cpu-z....keep track of how high your memory is clocking while you are overclocking your cpu. That's why I said use a 133 divider on the memory while we see how far your cpu will go. We can test to see how high the memory will go later. 1 step at a time.

Once you get the cpu cranked up pretty high, you should run a longer s&m test or run prime95 for a few hours minimum. Go ahead and get s&m and core temp installed, and when you have any more questions I'm here.

EDIT: once you get over 250 FSB lower the HT multi to 3.
Edited by ny_driver - 2/23/10 at 11:56am
Overclock_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX-60 DFI LP nF4 SLI-DR Expert 4890 BH-5 
OSMonitorKeyboardPower
Tiny7 23" awesome Corsair TX-850 
Case
None 
  hide details  
Reply
Overclock_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX-60 DFI LP nF4 SLI-DR Expert 4890 BH-5 
OSMonitorKeyboardPower
Tiny7 23" awesome Corsair TX-850 
Case
None 
  hide details  
Reply
post #22227 of 28692
Quote:
Originally Posted by ny_driver View Post
OK, start out by putting only the 2 matched 512mb sticks in there...take the rest out. Set you memory at the 133 divider with 3-4-4-8-1T timings. Then start overclocking the cpu by 5-10 MHz at a time, each time it posts test to see if the cpu is stable. For quick testing use s&m 1.9.1 which can be found here under stability testing.... http://www.overclock.net/amd-general...e-tools-3.html

In the "settings" tab set it like you see in the following picture. If it passes that test, you can probably go higher...5-10MHz at a time. If it fails the L1 cache test you probably need a little more voltage. I find that sometimes when it fails the L2 cache test more voltage can help. make sure you are monitoring your temperatures when you are testing. The L2 cache failure and FPU test failure are usually due to excessive heat, or just too high an overclock.
http://yfrog.com/3usmsettingstabp

You can get Core Temp at the same link under monitoring software. I assume you have cpu-z....keep track of how high your memory is clocking while you are overclocking your cpu. That's why I said use a 133 divider on the memory while we see how far your cpu will go. We can test to see how high the memory will go later. 1 step at a time.

Once you get the cpu cranked up pretty high, you should run a longer s&m test or run prime95 for a few hours minimum. Go ahead and get s&m and core temp installed, and when you have any more questions I'm here.

EDIT: once you get over 250 FSB lower the HT multi to 3.

tnx but im afraid dont have time to di this today probably tomorrow...if i make some progress will let know


but at start i leave ht multi to 4*?
cheese
(13 items)
 
  
CPUMotherboardGraphicsRAM
athlon x2 3800+ Gigabyte GA-K8N-SLI ATI Radeon X1600 XT ddr400 1024 MB 
Hard DriveOSMonitorPower
Maxtor 6V300F0 ATA 300GB windows 7 32 bit Samsung SyncMaster 788DF codegen 400W 
  hide details  
Reply
cheese
(13 items)
 
  
CPUMotherboardGraphicsRAM
athlon x2 3800+ Gigabyte GA-K8N-SLI ATI Radeon X1600 XT ddr400 1024 MB 
Hard DriveOSMonitorPower
Maxtor 6V300F0 ATA 300GB windows 7 32 bit Samsung SyncMaster 788DF codegen 400W 
  hide details  
Reply
post #22228 of 28692
Quote:
Originally Posted by mcoil112 View Post
tnx but im afraid dont have time to di this today probably tomorrow...if i make some progress will let know


but at start i leave ht multi to 4*?
set it to 3x. the main reason for setting to 3x when overclocking is so the board will post without locking up or rebooting during your experiments. Generally speaking the final OC will be using a high HTT, well over 250 so even with 3x you are close to spec, close enough anyway. There is nothing wrong with running over 1000, if the machine is stable.

my computer....290FSB x 3 HTT = 870 HTlink
Overclock_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX-60 DFI LP nF4 SLI-DR Expert 4890 BH-5 
OSMonitorKeyboardPower
Tiny7 23" awesome Corsair TX-850 
Case
None 
  hide details  
Reply
Overclock_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
FX-60 DFI LP nF4 SLI-DR Expert 4890 BH-5 
OSMonitorKeyboardPower
Tiny7 23" awesome Corsair TX-850 
Case
None 
  hide details  
Reply
post #22229 of 28692
ny_driver: mcoil112 has an nForce 4 board, which defaults to a 5x HT Link. (Unlike your nForce 3 which defaults to a 4x HT Link.) As long as HT stays around or below 1000 MHz, it should be fine. That is, 5x until about 210-220, 4x until about 250-265, 3x anything higher.
     
CPUMotherboardGraphicsRAM
Intel Core i7-3770k ASRock Z77 Extreme6 LGA 1155 EVGA GeForce GTX 780 FTW (03G-P4-3784-KR) Crucial Ballistix Sport 
Hard DriveHard DriveHard DriveHard Drive
Samsung Spinpoint F3 HD103SJ Hitachi Deskstar 5K3000 HDS5C3020ALA632 Hitachi Deskstar 7K1000 HDS721075KLA330 Hitachi X Mobile 
Optical DriveCoolingCoolingCooling
LG CH08LS10 (SATA BD-R / DVD±R / CD-RW) Prolimatech Megashadow Scythe S-Flex SFF21G x2 Scythe S-Flex SFF21F x2 
CoolingCoolingCoolingOS
Thermalright TR-FDB-1600 x4 XCLIO Amazing Fan 250mm Scythe Kama Bay SCKB-1000BK x3 Windows 7 Home Premium x64 SP1 
OSOSOSOS
Windows XP Home x64 SP3 (via Virtualbox) Fedora 15 LXDE (via Virtualbox) Slackware Linux XFCE (via Virtualbox) DOS 5.0 (via DOSbox) 
MonitorMonitorMonitorKeyboard
LG 47LH40 Acer G276HL Gbd Acer G276HL Gbd Unicomp Classic 104 Black Buckling Spring PS2 
PowerCaseMouseMouse Pad
Silverstone OP1000-E Modded Thermaltake Armor VA8003BWS Logitech G500 Massive generic black foam mat 
AudioAudioAudioAudio
Creative Sound Blaster X-Fi Titanium Fatal1ty C... Denon AVR-1910 Polk Audio Monitor 40 Polk Audio Monitor 30 
AudioAudioAudioAudio
Polk Audio CS1 Polk Audio PSW10 Jamo C400SUR Plantronics Gamecom 377 
AudioOtherOtherOther
LG HBM-235 Genovation ControlPad 683 Canon Imageclass MF4450 12" Dual White Cold Cathode Kit x3 
OtherOtherOtherOther
Microsoft Strategic Commander UPEK Eikon Digital Privacy Manager Logitech G27 Playseat Revolution (NASCAR) 
OtherOtherOtherOther
Playseat Revolution Gearshift Holder Sony DualShock 3 Microsoft Lifecam VX-1000 D-Link DBT-120 
OtherOther
APC SMT1500 HP Photosmart 3210xi All-in-One 
CPUMotherboardGraphicsRAM
Intel Core 2 Duo T7700 Merom Toshiba ISRAA 1.0 (Socket 479) ATI Mobility Radeon HD2600 modded CCC 10.6 OCZ2MV6674GK 
Hard DriveHard DriveOptical DriveCooling
Hitachi Travelstar 7K500 HD20500 Western Digital Caviar Blue (WD6400BEVT-22A0RT0) Matshita DVD-RAM UJ-850S ATA Stock heatpipe system 
CoolingOSOSOS
Thermaltake Massive23 CS Windows 7 Home Premium x64 SP1 Windows XP Home x64 SP3 (via Virtualbox) DOS 5.0 (via DOSbox) 
MonitorKeyboardPowerCase
17.0" Diagonal Widescreen WSXGA+ Internal only 19 V, 6.32 A Stock 17" Satellite shell (8.5 lbs) 
MouseMouse PadAudioAudio
Logitech G500 Small generic black foam mat HP Thin USB Powered Speakers Fiio E5 Headphone Amplifier 
AudioOtherOther
Griffin iTrip P1141 Microsoft GPS 168 Toshiba Backpack PA1366U-1NCS 
CPUMotherboardGraphicsRAM
AMD Athlon XP-M 2500+ Barton Hewlett-Packard 0024 ATI Mobility Radeon IGP-320M Crucial CT6464X265.16FG 
Hard DriveOptical DriveCoolingOS
Toshiba MK4021GAS Toshiba SD-R2512 Stock heatpipes Windows XP Home SP3 
MonitorKeyboardPowerCase
15.0" XGA TFT Internal only 18.5 V, 4.9 A Stock 15" Pavilion Shell (8 lbs) 
MouseMouse PadAudioOther
Logitech MX510 Gaming Optical Generic gel-based green Internal Altec Lansing only Targus PAU10KU 
OtherOther
D-Link DWL-G650M Generic black messenger-style bag 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Core i7-3770k ASRock Z77 Extreme6 LGA 1155 EVGA GeForce GTX 780 FTW (03G-P4-3784-KR) Crucial Ballistix Sport 
Hard DriveHard DriveHard DriveHard Drive
Samsung Spinpoint F3 HD103SJ Hitachi Deskstar 5K3000 HDS5C3020ALA632 Hitachi Deskstar 7K1000 HDS721075KLA330 Hitachi X Mobile 
Optical DriveCoolingCoolingCooling
LG CH08LS10 (SATA BD-R / DVD±R / CD-RW) Prolimatech Megashadow Scythe S-Flex SFF21G x2 Scythe S-Flex SFF21F x2 
CoolingCoolingCoolingOS
Thermalright TR-FDB-1600 x4 XCLIO Amazing Fan 250mm Scythe Kama Bay SCKB-1000BK x3 Windows 7 Home Premium x64 SP1 
OSOSOSOS
Windows XP Home x64 SP3 (via Virtualbox) Fedora 15 LXDE (via Virtualbox) Slackware Linux XFCE (via Virtualbox) DOS 5.0 (via DOSbox) 
MonitorMonitorMonitorKeyboard
LG 47LH40 Acer G276HL Gbd Acer G276HL Gbd Unicomp Classic 104 Black Buckling Spring PS2 
PowerCaseMouseMouse Pad
Silverstone OP1000-E Modded Thermaltake Armor VA8003BWS Logitech G500 Massive generic black foam mat 
AudioAudioAudioAudio
Creative Sound Blaster X-Fi Titanium Fatal1ty C... Denon AVR-1910 Polk Audio Monitor 40 Polk Audio Monitor 30 
AudioAudioAudioAudio
Polk Audio CS1 Polk Audio PSW10 Jamo C400SUR Plantronics Gamecom 377 
AudioOtherOtherOther
LG HBM-235 Genovation ControlPad 683 Canon Imageclass MF4450 12" Dual White Cold Cathode Kit x3 
OtherOtherOtherOther
Microsoft Strategic Commander UPEK Eikon Digital Privacy Manager Logitech G27 Playseat Revolution (NASCAR) 
OtherOtherOtherOther
Playseat Revolution Gearshift Holder Sony DualShock 3 Microsoft Lifecam VX-1000 D-Link DBT-120 
OtherOther
APC SMT1500 HP Photosmart 3210xi All-in-One 
CPUMotherboardGraphicsRAM
Intel Core 2 Duo T7700 Merom Toshiba ISRAA 1.0 (Socket 479) ATI Mobility Radeon HD2600 modded CCC 10.6 OCZ2MV6674GK 
Hard DriveHard DriveOptical DriveCooling
Hitachi Travelstar 7K500 HD20500 Western Digital Caviar Blue (WD6400BEVT-22A0RT0) Matshita DVD-RAM UJ-850S ATA Stock heatpipe system 
CoolingOSOSOS
Thermaltake Massive23 CS Windows 7 Home Premium x64 SP1 Windows XP Home x64 SP3 (via Virtualbox) DOS 5.0 (via DOSbox) 
MonitorKeyboardPowerCase
17.0" Diagonal Widescreen WSXGA+ Internal only 19 V, 6.32 A Stock 17" Satellite shell (8.5 lbs) 
MouseMouse PadAudioAudio
Logitech G500 Small generic black foam mat HP Thin USB Powered Speakers Fiio E5 Headphone Amplifier 
AudioOtherOther
Griffin iTrip P1141 Microsoft GPS 168 Toshiba Backpack PA1366U-1NCS 
CPUMotherboardGraphicsRAM
AMD Athlon XP-M 2500+ Barton Hewlett-Packard 0024 ATI Mobility Radeon IGP-320M Crucial CT6464X265.16FG 
Hard DriveOptical DriveCoolingOS
Toshiba MK4021GAS Toshiba SD-R2512 Stock heatpipes Windows XP Home SP3 
MonitorKeyboardPowerCase
15.0" XGA TFT Internal only 18.5 V, 4.9 A Stock 15" Pavilion Shell (8 lbs) 
MouseMouse PadAudioOther
Logitech MX510 Gaming Optical Generic gel-based green Internal Altec Lansing only Targus PAU10KU 
OtherOther
D-Link DWL-G650M Generic black messenger-style bag 
  hide details  
Reply
post #22230 of 28692
well im back online with my stupid pc and quiestions
here we go, my bios cant handle it myselt so list of options i should chane to Set memory at the 133 divider with 3-4-4-8-1T timings:
option current setting needed setting
cpu/ddr clock ratio 2/2 xxx
cas#latency 2,5 xxx
min RAS # active time 8T
RAS # to CAS # delay 4T
row precharge time 4T
row to row delay 2T
row cycle time 12T
row refresh cyc time 14T
read to write time 4T
write recovery time 3bus clock
write to read dealy 2 bus clock
refresh rate 200MhZ 7,8bus 133MhZ (15,6 or 7,8 or 3,9???)
read preamble value 5,5ns
async latency value 7ns

so if someone can fill this crossword i can act.....tnx
cheese
(13 items)
 
  
CPUMotherboardGraphicsRAM
athlon x2 3800+ Gigabyte GA-K8N-SLI ATI Radeon X1600 XT ddr400 1024 MB 
Hard DriveOSMonitorPower
Maxtor 6V300F0 ATA 300GB windows 7 32 bit Samsung SyncMaster 788DF codegen 400W 
  hide details  
Reply
cheese
(13 items)
 
  
CPUMotherboardGraphicsRAM
athlon x2 3800+ Gigabyte GA-K8N-SLI ATI Radeon X1600 XT ddr400 1024 MB 
Hard DriveOSMonitorPower
Maxtor 6V300F0 ATA 300GB windows 7 32 bit Samsung SyncMaster 788DF codegen 400W 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › The Socket 939 Appreciation Club and Knowledgebase [Official]