Overclock.net › Forums › Case Mods & Cases › Computer Cases › The Cooler Master 690 Club
New Posts  All Forums:Forum Nav:

The Cooler Master 690 Club - Page 792

post #7911 of 19729
Quote:
Originally Posted by Tizmo View Post
Right, I will be ordering the megahalem tomorrow, along with more case fans. I just wanted to hear your opinions about the fans and their placement...

I thought about ordering two 25mm Scythe Slip Stream 1600 rpm fans for intake. Would they be a good choice?

If so, I thought about this kind of placement...

Front: Two Scythe Slip Stream 1600 rpm
Rear: Stock CM690 front LED fan
Top: The other two stock CM690 fans.

Would that be a good setup or should I replace the stock fans as well? Also, should I add a fan to the bottom?

EDIT: I will also be using a fan controller...the Sunbeam Rheobus Extreme Silver...I cannot get the black version anywhere in Germany and I do not want to pay the extra premium for buying it from the UK...
Can't see anything wrong with that although I believe the Slipstreams are kind of pricey.

EDIT - Just noticed too, if you're going to be running the Slipstreams off a fan controller, I recommend going with the highest RPM Slipstreams you can get, that way you'll have access to a wider range of fan speeds with the controller. You can easily run a 3000 rpm fan at 1600 rpm with a controller.
Edited by Aaron_Henderson - 9/20/09 at 8:30am
     
CPUMotherboardGraphicsRAM
Intel Xeon W3565 (i7 960) Dell Precision T3500 Gigabyte R9 290X Windforce 10GB DDR3 PC3-10600 (5x2GB)  
Hard DriveCoolingOSMonitor
160GB+1TB 3.5"  Corsair H80 w/ clear tubing and 110mm tube rese... Windows 7 Ultimate Samsung 245BW 24" 1920x1200 
KeyboardPowerCaseMouse
Not sure yet...looking at cheap mech boards at ... Corsair CX600 Corsair Carbide Spec 01 Cooler Master CM Storm Spawn 
Mouse PadAudioOtherOther
Steel Series QCK Kinter MA-160 MSI TV Anywhere Plus Black sleeved cables / extensions 
CPUCPUMotherboardGraphics
Intel Xeon X5450 Intel Xeon X5450 Proliant DL360 G5 EVGA Geforce GTX 780 Superclocked ACX 2.0 3GB 
RAMHard DriveOSPower
8GB (8x1GB) DDR2 667 FBDIMM 60GB SSD w/ PCIe SATA 3 controller Windows 7 Ultimate 700W 
Case
modified 1U (desktop conversion) 
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 5GHz Asrock Z68 Exteme 3 Gen 3 Asus R9 290X Direct CU II OC 8GB (2x4GB) Corsair Vengeance DDR3 1600 
Hard DriveCoolingCoolingCooling
750GB  Swiftech Apogee GT Danger Den CPX-1 Swiftech MCR220 
CoolingMonitorKeyboardPower
Swiftech Micro Res 23" 1080P Samsung Ducky "OCN Edition" 1008 Antec TruePower New 650 
CaseMouseMouse PadAudio
Bitfenix Shinobi XL window Cooler Master Storm Spawn Steel Series QCK+ Kinter MA-160 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Xeon W3565 (i7 960) Dell Precision T3500 Gigabyte R9 290X Windforce 10GB DDR3 PC3-10600 (5x2GB)  
Hard DriveCoolingOSMonitor
160GB+1TB 3.5"  Corsair H80 w/ clear tubing and 110mm tube rese... Windows 7 Ultimate Samsung 245BW 24" 1920x1200 
KeyboardPowerCaseMouse
Not sure yet...looking at cheap mech boards at ... Corsair CX600 Corsair Carbide Spec 01 Cooler Master CM Storm Spawn 
Mouse PadAudioOtherOther
Steel Series QCK Kinter MA-160 MSI TV Anywhere Plus Black sleeved cables / extensions 
CPUCPUMotherboardGraphics
Intel Xeon X5450 Intel Xeon X5450 Proliant DL360 G5 EVGA Geforce GTX 780 Superclocked ACX 2.0 3GB 
RAMHard DriveOSPower
8GB (8x1GB) DDR2 667 FBDIMM 60GB SSD w/ PCIe SATA 3 controller Windows 7 Ultimate 700W 
Case
modified 1U (desktop conversion) 
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 5GHz Asrock Z68 Exteme 3 Gen 3 Asus R9 290X Direct CU II OC 8GB (2x4GB) Corsair Vengeance DDR3 1600 
Hard DriveCoolingCoolingCooling
750GB  Swiftech Apogee GT Danger Den CPX-1 Swiftech MCR220 
CoolingMonitorKeyboardPower
Swiftech Micro Res 23" 1080P Samsung Ducky "OCN Edition" 1008 Antec TruePower New 650 
CaseMouseMouse PadAudio
Bitfenix Shinobi XL window Cooler Master Storm Spawn Steel Series QCK+ Kinter MA-160 
  hide details  
Reply
post #7912 of 19729
Quote:
Originally Posted by Aaron_Henderson View Post
Can't see anything wrong with that although I believe the Slipstreams are kind of pricey.
I can get one slip stream for 7,90€...fans are pretty cheap here.
http://www.aquatuning.de/product_inf...20x25mm--.html
Black Dog
(13 items)
 
  
CPUMotherboardGraphicsRAM
[Intel i7 4770K] [Gigabyte Z87X-UD4H] [Sapphire Vapor-X R9 280x] [Corsair Vengeance Pro 16GB 1867 MHz] 
Hard DriveHard DriveOptical DriveCooling
[Samsung 840 EVO 250GB] [Spinpoint F3 1TB] [Samsung SH-S223Q] [Corsair H110] 
OSMonitorPowerCase
[Windows 8.1 x64] [ASUS VW247H] [Corsair HX620] [Corsair Carbide 500R] 
Audio
[Digidesign Mbox 2 Mini -> Shure SRH940] 
  hide details  
Reply
Black Dog
(13 items)
 
  
CPUMotherboardGraphicsRAM
[Intel i7 4770K] [Gigabyte Z87X-UD4H] [Sapphire Vapor-X R9 280x] [Corsair Vengeance Pro 16GB 1867 MHz] 
Hard DriveHard DriveOptical DriveCooling
[Samsung 840 EVO 250GB] [Spinpoint F3 1TB] [Samsung SH-S223Q] [Corsair H110] 
OSMonitorPowerCase
[Windows 8.1 x64] [ASUS VW247H] [Corsair HX620] [Corsair Carbide 500R] 
Audio
[Digidesign Mbox 2 Mini -> Shure SRH940] 
  hide details  
Reply
post #7913 of 19729
Quote:
Originally Posted by Tizmo View Post
I can get one slip stream for 7,90€...fans are pretty cheap here.
http://www.aquatuning.de/product_inf...20x25mm--.html
Yeah, my bad, it's the S-Flex that are the $$$ ones.
     
CPUMotherboardGraphicsRAM
Intel Xeon W3565 (i7 960) Dell Precision T3500 Gigabyte R9 290X Windforce 10GB DDR3 PC3-10600 (5x2GB)  
Hard DriveCoolingOSMonitor
160GB+1TB 3.5"  Corsair H80 w/ clear tubing and 110mm tube rese... Windows 7 Ultimate Samsung 245BW 24" 1920x1200 
KeyboardPowerCaseMouse
Not sure yet...looking at cheap mech boards at ... Corsair CX600 Corsair Carbide Spec 01 Cooler Master CM Storm Spawn 
Mouse PadAudioOtherOther
Steel Series QCK Kinter MA-160 MSI TV Anywhere Plus Black sleeved cables / extensions 
CPUCPUMotherboardGraphics
Intel Xeon X5450 Intel Xeon X5450 Proliant DL360 G5 EVGA Geforce GTX 780 Superclocked ACX 2.0 3GB 
RAMHard DriveOSPower
8GB (8x1GB) DDR2 667 FBDIMM 60GB SSD w/ PCIe SATA 3 controller Windows 7 Ultimate 700W 
Case
modified 1U (desktop conversion) 
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 5GHz Asrock Z68 Exteme 3 Gen 3 Asus R9 290X Direct CU II OC 8GB (2x4GB) Corsair Vengeance DDR3 1600 
Hard DriveCoolingCoolingCooling
750GB  Swiftech Apogee GT Danger Den CPX-1 Swiftech MCR220 
CoolingMonitorKeyboardPower
Swiftech Micro Res 23" 1080P Samsung Ducky "OCN Edition" 1008 Antec TruePower New 650 
CaseMouseMouse PadAudio
Bitfenix Shinobi XL window Cooler Master Storm Spawn Steel Series QCK+ Kinter MA-160 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Xeon W3565 (i7 960) Dell Precision T3500 Gigabyte R9 290X Windforce 10GB DDR3 PC3-10600 (5x2GB)  
Hard DriveCoolingOSMonitor
160GB+1TB 3.5"  Corsair H80 w/ clear tubing and 110mm tube rese... Windows 7 Ultimate Samsung 245BW 24" 1920x1200 
KeyboardPowerCaseMouse
Not sure yet...looking at cheap mech boards at ... Corsair CX600 Corsair Carbide Spec 01 Cooler Master CM Storm Spawn 
Mouse PadAudioOtherOther
Steel Series QCK Kinter MA-160 MSI TV Anywhere Plus Black sleeved cables / extensions 
CPUCPUMotherboardGraphics
Intel Xeon X5450 Intel Xeon X5450 Proliant DL360 G5 EVGA Geforce GTX 780 Superclocked ACX 2.0 3GB 
RAMHard DriveOSPower
8GB (8x1GB) DDR2 667 FBDIMM 60GB SSD w/ PCIe SATA 3 controller Windows 7 Ultimate 700W 
Case
modified 1U (desktop conversion) 
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 5GHz Asrock Z68 Exteme 3 Gen 3 Asus R9 290X Direct CU II OC 8GB (2x4GB) Corsair Vengeance DDR3 1600 
Hard DriveCoolingCoolingCooling
750GB  Swiftech Apogee GT Danger Den CPX-1 Swiftech MCR220 
CoolingMonitorKeyboardPower
Swiftech Micro Res 23" 1080P Samsung Ducky "OCN Edition" 1008 Antec TruePower New 650 
CaseMouseMouse PadAudio
Bitfenix Shinobi XL window Cooler Master Storm Spawn Steel Series QCK+ Kinter MA-160 
  hide details  
Reply
post #7914 of 19729
Quote:
Originally Posted by Aaron_Henderson View Post
Yeah, my bad, it's the S-Flex that are the $$$ ones.
Correct, those are about twice as much as the Slip Streams. Still, the Slip Streams should be ok then?

Also, should I care about adding a sixth fan to the bottom? If so, what should I get for it?
Black Dog
(13 items)
 
  
CPUMotherboardGraphicsRAM
[Intel i7 4770K] [Gigabyte Z87X-UD4H] [Sapphire Vapor-X R9 280x] [Corsair Vengeance Pro 16GB 1867 MHz] 
Hard DriveHard DriveOptical DriveCooling
[Samsung 840 EVO 250GB] [Spinpoint F3 1TB] [Samsung SH-S223Q] [Corsair H110] 
OSMonitorPowerCase
[Windows 8.1 x64] [ASUS VW247H] [Corsair HX620] [Corsair Carbide 500R] 
Audio
[Digidesign Mbox 2 Mini -> Shure SRH940] 
  hide details  
Reply
Black Dog
(13 items)
 
  
CPUMotherboardGraphicsRAM
[Intel i7 4770K] [Gigabyte Z87X-UD4H] [Sapphire Vapor-X R9 280x] [Corsair Vengeance Pro 16GB 1867 MHz] 
Hard DriveHard DriveOptical DriveCooling
[Samsung 840 EVO 250GB] [Spinpoint F3 1TB] [Samsung SH-S223Q] [Corsair H110] 
OSMonitorPowerCase
[Windows 8.1 x64] [ASUS VW247H] [Corsair HX620] [Corsair Carbide 500R] 
Audio
[Digidesign Mbox 2 Mini -> Shure SRH940] 
  hide details  
Reply
post #7915 of 19729
Quote:
Originally Posted by Tizmo View Post
Correct, those are about twice as much as the Slip Streams. Still, the Slip Streams should be ok then?

Also, should I care about adding a sixth fan to the bottom? If so, what should I get for it?
Get the highest RPM Slipstreams you can if you are running them of a fan controller though, you get a larger RPM range that way. And you could use another Slipstream at the bottom. The bottom fan blows at the GPU area pretty well, I would use it. But I also have 7 Ultra Kaze 3000's in my case, so I like my airflow.
     
CPUMotherboardGraphicsRAM
Intel Xeon W3565 (i7 960) Dell Precision T3500 Gigabyte R9 290X Windforce 10GB DDR3 PC3-10600 (5x2GB)  
Hard DriveCoolingOSMonitor
160GB+1TB 3.5"  Corsair H80 w/ clear tubing and 110mm tube rese... Windows 7 Ultimate Samsung 245BW 24" 1920x1200 
KeyboardPowerCaseMouse
Not sure yet...looking at cheap mech boards at ... Corsair CX600 Corsair Carbide Spec 01 Cooler Master CM Storm Spawn 
Mouse PadAudioOtherOther
Steel Series QCK Kinter MA-160 MSI TV Anywhere Plus Black sleeved cables / extensions 
CPUCPUMotherboardGraphics
Intel Xeon X5450 Intel Xeon X5450 Proliant DL360 G5 EVGA Geforce GTX 780 Superclocked ACX 2.0 3GB 
RAMHard DriveOSPower
8GB (8x1GB) DDR2 667 FBDIMM 60GB SSD w/ PCIe SATA 3 controller Windows 7 Ultimate 700W 
Case
modified 1U (desktop conversion) 
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 5GHz Asrock Z68 Exteme 3 Gen 3 Asus R9 290X Direct CU II OC 8GB (2x4GB) Corsair Vengeance DDR3 1600 
Hard DriveCoolingCoolingCooling
750GB  Swiftech Apogee GT Danger Den CPX-1 Swiftech MCR220 
CoolingMonitorKeyboardPower
Swiftech Micro Res 23" 1080P Samsung Ducky "OCN Edition" 1008 Antec TruePower New 650 
CaseMouseMouse PadAudio
Bitfenix Shinobi XL window Cooler Master Storm Spawn Steel Series QCK+ Kinter MA-160 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Xeon W3565 (i7 960) Dell Precision T3500 Gigabyte R9 290X Windforce 10GB DDR3 PC3-10600 (5x2GB)  
Hard DriveCoolingOSMonitor
160GB+1TB 3.5"  Corsair H80 w/ clear tubing and 110mm tube rese... Windows 7 Ultimate Samsung 245BW 24" 1920x1200 
KeyboardPowerCaseMouse
Not sure yet...looking at cheap mech boards at ... Corsair CX600 Corsair Carbide Spec 01 Cooler Master CM Storm Spawn 
Mouse PadAudioOtherOther
Steel Series QCK Kinter MA-160 MSI TV Anywhere Plus Black sleeved cables / extensions 
CPUCPUMotherboardGraphics
Intel Xeon X5450 Intel Xeon X5450 Proliant DL360 G5 EVGA Geforce GTX 780 Superclocked ACX 2.0 3GB 
RAMHard DriveOSPower
8GB (8x1GB) DDR2 667 FBDIMM 60GB SSD w/ PCIe SATA 3 controller Windows 7 Ultimate 700W 
Case
modified 1U (desktop conversion) 
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 5GHz Asrock Z68 Exteme 3 Gen 3 Asus R9 290X Direct CU II OC 8GB (2x4GB) Corsair Vengeance DDR3 1600 
Hard DriveCoolingCoolingCooling
750GB  Swiftech Apogee GT Danger Den CPX-1 Swiftech MCR220 
CoolingMonitorKeyboardPower
Swiftech Micro Res 23" 1080P Samsung Ducky "OCN Edition" 1008 Antec TruePower New 650 
CaseMouseMouse PadAudio
Bitfenix Shinobi XL window Cooler Master Storm Spawn Steel Series QCK+ Kinter MA-160 
  hide details  
Reply
post #7916 of 19729
I have heard reports that if you use a high RPM fan and tone it down with fan controller, it makes clicking noises...is this true?
Black Dog
(13 items)
 
  
CPUMotherboardGraphicsRAM
[Intel i7 4770K] [Gigabyte Z87X-UD4H] [Sapphire Vapor-X R9 280x] [Corsair Vengeance Pro 16GB 1867 MHz] 
Hard DriveHard DriveOptical DriveCooling
[Samsung 840 EVO 250GB] [Spinpoint F3 1TB] [Samsung SH-S223Q] [Corsair H110] 
OSMonitorPowerCase
[Windows 8.1 x64] [ASUS VW247H] [Corsair HX620] [Corsair Carbide 500R] 
Audio
[Digidesign Mbox 2 Mini -> Shure SRH940] 
  hide details  
Reply
Black Dog
(13 items)
 
  
CPUMotherboardGraphicsRAM
[Intel i7 4770K] [Gigabyte Z87X-UD4H] [Sapphire Vapor-X R9 280x] [Corsair Vengeance Pro 16GB 1867 MHz] 
Hard DriveHard DriveOptical DriveCooling
[Samsung 840 EVO 250GB] [Spinpoint F3 1TB] [Samsung SH-S223Q] [Corsair H110] 
OSMonitorPowerCase
[Windows 8.1 x64] [ASUS VW247H] [Corsair HX620] [Corsair Carbide 500R] 
Audio
[Digidesign Mbox 2 Mini -> Shure SRH940] 
  hide details  
Reply
post #7917 of 19729
Quote:
Originally Posted by Tizmo View Post
I have heard reports that if you use a high RPM fan and tone it down with fan controller, it makes clicking noises...is this true?
So they say, but I haven't encountered it yet. I think it only applies to sleeve bearing fans, which, the Slipstreams are as well as my Ultra Kaze's. Like I said though, I've not seen it and all of mine are run at 1200 RPM or 1600 RPM on the rad. And I've had them for months now running that way.
     
CPUMotherboardGraphicsRAM
Intel Xeon W3565 (i7 960) Dell Precision T3500 Gigabyte R9 290X Windforce 10GB DDR3 PC3-10600 (5x2GB)  
Hard DriveCoolingOSMonitor
160GB+1TB 3.5"  Corsair H80 w/ clear tubing and 110mm tube rese... Windows 7 Ultimate Samsung 245BW 24" 1920x1200 
KeyboardPowerCaseMouse
Not sure yet...looking at cheap mech boards at ... Corsair CX600 Corsair Carbide Spec 01 Cooler Master CM Storm Spawn 
Mouse PadAudioOtherOther
Steel Series QCK Kinter MA-160 MSI TV Anywhere Plus Black sleeved cables / extensions 
CPUCPUMotherboardGraphics
Intel Xeon X5450 Intel Xeon X5450 Proliant DL360 G5 EVGA Geforce GTX 780 Superclocked ACX 2.0 3GB 
RAMHard DriveOSPower
8GB (8x1GB) DDR2 667 FBDIMM 60GB SSD w/ PCIe SATA 3 controller Windows 7 Ultimate 700W 
Case
modified 1U (desktop conversion) 
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 5GHz Asrock Z68 Exteme 3 Gen 3 Asus R9 290X Direct CU II OC 8GB (2x4GB) Corsair Vengeance DDR3 1600 
Hard DriveCoolingCoolingCooling
750GB  Swiftech Apogee GT Danger Den CPX-1 Swiftech MCR220 
CoolingMonitorKeyboardPower
Swiftech Micro Res 23" 1080P Samsung Ducky "OCN Edition" 1008 Antec TruePower New 650 
CaseMouseMouse PadAudio
Bitfenix Shinobi XL window Cooler Master Storm Spawn Steel Series QCK+ Kinter MA-160 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Intel Xeon W3565 (i7 960) Dell Precision T3500 Gigabyte R9 290X Windforce 10GB DDR3 PC3-10600 (5x2GB)  
Hard DriveCoolingOSMonitor
160GB+1TB 3.5"  Corsair H80 w/ clear tubing and 110mm tube rese... Windows 7 Ultimate Samsung 245BW 24" 1920x1200 
KeyboardPowerCaseMouse
Not sure yet...looking at cheap mech boards at ... Corsair CX600 Corsair Carbide Spec 01 Cooler Master CM Storm Spawn 
Mouse PadAudioOtherOther
Steel Series QCK Kinter MA-160 MSI TV Anywhere Plus Black sleeved cables / extensions 
CPUCPUMotherboardGraphics
Intel Xeon X5450 Intel Xeon X5450 Proliant DL360 G5 EVGA Geforce GTX 780 Superclocked ACX 2.0 3GB 
RAMHard DriveOSPower
8GB (8x1GB) DDR2 667 FBDIMM 60GB SSD w/ PCIe SATA 3 controller Windows 7 Ultimate 700W 
Case
modified 1U (desktop conversion) 
CPUMotherboardGraphicsRAM
Intel i5 2500K @ 5GHz Asrock Z68 Exteme 3 Gen 3 Asus R9 290X Direct CU II OC 8GB (2x4GB) Corsair Vengeance DDR3 1600 
Hard DriveCoolingCoolingCooling
750GB  Swiftech Apogee GT Danger Den CPX-1 Swiftech MCR220 
CoolingMonitorKeyboardPower
Swiftech Micro Res 23" 1080P Samsung Ducky "OCN Edition" 1008 Antec TruePower New 650 
CaseMouseMouse PadAudio
Bitfenix Shinobi XL window Cooler Master Storm Spawn Steel Series QCK+ Kinter MA-160 
  hide details  
Reply
post #7918 of 19729
ive got slipstream 1900rpm fans on my rad, and if i slow them down to 800-1200rpm i dont hear anything, so maybe they just had a bad fan or something... but i dont have that noise.
HAF 932
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Asrock P67 Extreme6 EVGA GTX580 SuperClocked 8gb Corsair Dominator GT 2133mhz 
Hard DriveOSMonitorKeyboard
OCZ Vertex2 60GB + 250gb storage Win7 64bit Iiyama ProLite E2407HDSD Logitech G11 
PowerCaseMouseMouse Pad
Corsair HX850W CM HAF932 Logitec G500 Coolermaster Alu Pad 
  hide details  
Reply
HAF 932
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Asrock P67 Extreme6 EVGA GTX580 SuperClocked 8gb Corsair Dominator GT 2133mhz 
Hard DriveOSMonitorKeyboard
OCZ Vertex2 60GB + 250gb storage Win7 64bit Iiyama ProLite E2407HDSD Logitech G11 
PowerCaseMouseMouse Pad
Corsair HX850W CM HAF932 Logitec G500 Coolermaster Alu Pad 
  hide details  
Reply
post #7919 of 19729




post #7920 of 19729
@e6800xe pretty nice

i think if i come across another blue led fan i might put it at the back side of the cd bay area. one fan at the front pulling air in and one in the back pushing it towards the cpu fan. what you guys think? shouldn't add any noise at all since it would be deep inside the case. and should have a pretty good flow of air through it.
    
CPUMotherboardGraphicsRAM
i7 920 @ 3.8 evga x58 evga gtx 295 w/backplate, evga 8400 (3ed monitor) 6 gigs gSkill 1333 
Hard DriveOptical DriveOSMonitor
1.5TB, 500GB, 400GB 74GB 10k 2x sata dvd burner's windows 7 64 Bit 24 inch acer 1920 x 1200 and 2x 18 dell 1280x1024 
KeyboardPowerCaseMouse
Dell wireless zalman 850 (1050 watt max) cm 690 logitech 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 920 @ 3.8 evga x58 evga gtx 295 w/backplate, evga 8400 (3ed monitor) 6 gigs gSkill 1333 
Hard DriveOptical DriveOSMonitor
1.5TB, 500GB, 400GB 74GB 10k 2x sata dvd burner's windows 7 64 Bit 24 inch acer 1920 x 1200 and 2x 18 dell 1280x1024 
KeyboardPowerCaseMouse
Dell wireless zalman 850 (1050 watt max) cm 690 logitech 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › The Cooler Master 690 Club