Overclock.net › Forums › Intel › Intel CPUs › Q6600-Help me stabilize @ 3.2GHz+
New Posts  All Forums:Forum Nav:

Q6600-Help me stabilize @ 3.2GHz+

post #1 of 16
Thread Starter 
I might be stupid but I cant get this cpu over 3GHz.

I cant stabilize 3.2GHz...I tried 1.46 V but still no luck. What am I doing wrong? What V should I increase other then the Vcore?

This is my current settings @ 3GHz:

The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
post #2 of 16
Your memory voltage is way too low mate.

Also if you are only getting 1.28 in windows then you got some serious vdroop there. You may have to bump it to 1.5 and then work your way back down.

Crucial ballistix need between 2.1 and 2.2 v to be stock stable. check the maker site for specs.

Try 8x400 instead of 9x333 easier on the board. then you can run your ram at a 1:1 ratio as well


What are cpu-z and coretemp showing and what is the VID of your chip?
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 8700k Gigabyte Aorus Z370 Gaming 7 Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Dual 
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Swiftech H240 X2 Prestige AIO Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Delux T9 Pro / Logitech K360 EVGA Supernova G2 1000W Corsair 750D Airflow Mionix Naos 7000 
Mouse PadAudioAudioOther
Perixx DX-3000LAL Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 8700k Gigabyte Aorus Z370 Gaming 7 Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Dual 
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Swiftech H240 X2 Prestige AIO Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Delux T9 Pro / Logitech K360 EVGA Supernova G2 1000W Corsair 750D Airflow Mionix Naos 7000 
Mouse PadAudioAudioOther
Perixx DX-3000LAL Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
post #3 of 16
Thread Starter 
Quote:
Originally Posted by Robilar View Post
Your memory voltage is way too low mate.

Also if you are only getting 1.28 in windows then you got some serious vdroop there. You may have to bump it to 1.5 and then work your way back down.

Crucial ballistix need between 2.1 and 2.2 v to be stock stable. check the maker site for specs.

Try 8x400 instead of 9x333 easier on the board. then you can run your ram at a 1:1 ratio as well


What are cpu-z and coretemp showing and what is the VID of your chip?
My ram is stable (as far as I know).

My VID is: 1.2875.

EDIT: Yeah, I have pretty bad Vdroop...From 1.270 to 1.23-1.24V.
The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
post #4 of 16
So when you run orthos and run a separate ram test it passes?

thats a good VID for your chip. You should be able to be stable at under 1.4vcore (in bios) with 3.2. I only need 1.3825 and my chip VID is 1.30
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 8700k Gigabyte Aorus Z370 Gaming 7 Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Dual 
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Swiftech H240 X2 Prestige AIO Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Delux T9 Pro / Logitech K360 EVGA Supernova G2 1000W Corsair 750D Airflow Mionix Naos 7000 
Mouse PadAudioAudioOther
Perixx DX-3000LAL Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 8700k Gigabyte Aorus Z370 Gaming 7 Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Dual 
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Swiftech H240 X2 Prestige AIO Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Delux T9 Pro / Logitech K360 EVGA Supernova G2 1000W Corsair 750D Airflow Mionix Naos 7000 
Mouse PadAudioAudioOther
Perixx DX-3000LAL Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
post #5 of 16
Thread Starter 
Quote:
Originally Posted by Robilar View Post
So when you run orthos and run a separate ram test it passes?

thats a good VID for your chip. You should be able to be stable at under 1.4vcore (in bios) with 3.2. I only need 1.3825 and my chip VID is 1.30
Used 1.85V for the ram since i got them and no probs...

But still no luck on 3.2ghz.
The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
post #6 of 16
If you increase the fsb of the ram while its undervolted as a result of increasing cpu fsb (which you have to do depending on what you set your memory ratios at), it will be unstable.

Look up your ram on the crucial site and find out what its stock voltage is. I have a set of crucial ballistix tracers in my kids rig (E2180 on the Abit IP35-E) and it would no go past 2.8 ghz on cpu clock until I changed the ram voltage to crucials' required levels.

You won't be overvolting the ram, you will be setting it to its factory defaults.
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 8700k Gigabyte Aorus Z370 Gaming 7 Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Dual 
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Swiftech H240 X2 Prestige AIO Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Delux T9 Pro / Logitech K360 EVGA Supernova G2 1000W Corsair 750D Airflow Mionix Naos 7000 
Mouse PadAudioAudioOther
Perixx DX-3000LAL Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 8700k Gigabyte Aorus Z370 Gaming 7 Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Dual 
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Swiftech H240 X2 Prestige AIO Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Delux T9 Pro / Logitech K360 EVGA Supernova G2 1000W Corsair 750D Airflow Mionix Naos 7000 
Mouse PadAudioAudioOther
Perixx DX-3000LAL Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
post #7 of 16
Run memtest for the RAM, other wise you can risk data corruption.

Deffinately boost up the RAM voltage, way too low.
    
CPUMotherboardGraphicsRAM
C2D T7100 1.8 ghz (undervolted) ummm... Dell Intel X3100 2 x 1gb 667mhz 
Hard DriveOptical DriveOSMonitor
Fujitsu 7200 RPM 120gb CD-RW/DVD dual boot Vista business 1440x900 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
C2D T7100 1.8 ghz (undervolted) ummm... Dell Intel X3100 2 x 1gb 667mhz 
Hard DriveOptical DriveOSMonitor
Fujitsu 7200 RPM 120gb CD-RW/DVD dual boot Vista business 1440x900 
  hide details  
Reply
post #8 of 16
Thread Starter 
Quote:
Originally Posted by Robilar View Post
If you increase the fsb of the ram while its undervolted as a result of increasing cpu fsb (which you have to do depending on what you set your memory ratios at), it will be unstable.

Look up your ram on the crucial site and find out what its stock voltage is. I have a set of crucial ballistix tracers in my kids rig (E2180 on the Abit IP35-E) and it would no go past 2.8 ghz on cpu clock until I changed the ram voltage to crucials' required levels.

You won't be overvolting the ram, you will be setting it to its factory defaults.
Thanks for the info, I will try it asap.

rep+
The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
post #9 of 16
DONT GIVE IT MORE VOLTS!

Increase your NB (MCH) to 1.37 and you should be able to go 360x9 easy.
Work Work
(14 items)
 
  
CPUMotherboardGraphicsRAM
Xeon X5670 @ 3.33GHz EVGA Classified X58 (Westmere Modded) AMD 6950 2GB G. Skill Ripjaws 24GB 
Hard DriveCoolingOSMonitor
Samsung 850 EVO 500GB Scythe FUMA  Windows 10 Pro 64 NEC PA241W 
KeyboardPowerCaseMouse
Magicforce 68 (Gat. Blue) Ultra X3 1000W Dremel Modded CM Cosmos S Logitech G700 
Other
Wacom Intuos 4 
  hide details  
Reply
Work Work
(14 items)
 
  
CPUMotherboardGraphicsRAM
Xeon X5670 @ 3.33GHz EVGA Classified X58 (Westmere Modded) AMD 6950 2GB G. Skill Ripjaws 24GB 
Hard DriveCoolingOSMonitor
Samsung 850 EVO 500GB Scythe FUMA  Windows 10 Pro 64 NEC PA241W 
KeyboardPowerCaseMouse
Magicforce 68 (Gat. Blue) Ultra X3 1000W Dremel Modded CM Cosmos S Logitech G700 
Other
Wacom Intuos 4 
  hide details  
Reply
post #10 of 16
Thread Starter 
2 sek with Orthos and BSOD.

The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
The Kandalf
(16 items)
 
  
CPUMotherboardGraphicsGraphics
I7 5820K MSI X99S Gaming 7 ASUS R9 280X TOP Crossfire X ASUS R9 280X TOP Crossfire X 
RAMHard DriveOptical DriveOS
Crucial DDR4 2133MHz 8GB (2x4GB) Samsung SpinPoint F1 1TB HP DVD630 Ubuntu 
MonitorKeyboardPowerCase
2x Philips Brilliance 220CW Microsoft Wireless Desktop Elite Keyboard Fractal Design Newton R3, 800W 80+ Platinum Corsair 900D 
MouseMouse PadAudioAudio
Mionix Naos 8200 Razer Pro Solutions Arcam rDAC B&W CM1 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Q6600-Help me stabilize @ 3.2GHz+