Originally Posted by Danbeme32
Is there a way that I can see it in FahMon. Wow what a difference. I use to get 11-12min per wu. Now am getting 9.8 minute per wu. Add me to the list
Yup, in the ubuntu window, hit ctrl+a, ctrl+d. Then once to the command prompt, type ifconfig. NOT Ipconfig, like in windows. Then, the 192.168 number will be the address of the client. In Fahmon, right click and hit add client, then type the following:
Where the Xs are what you got from the ifconfig. It should work just fine after that.
On a side note, I was just doing some looking online for a Vista sidebar gadget that showed the progress of a work unit. I found this
This is basically the same, right click on it, go to options, then type the exact same information as you put into fahmon into the core 1/core 2. Since most of us here are using 2x installs of SMP, the "dual core" version works very well. Im using a quad, and here is what mine looks like.Edited by 0rion - 5/17/08 at 7:10pm