Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › modding supplys.. where's the cheapest place?
New Posts  All Forums:Forum Nav:

modding supplys.. where's the cheapest place?

post #1 of 6
Thread Starter 
doing a big mod here soon.. need quite a few things..

15ft of c-channel molding
5x 120x25mm fans @ high cfm
black/carbon psu sleeving kit
14ft 1/2" tubing
7ft of clear/red anti-kink coils
8x worm hose clamps
2x120mm rad grill
cheap dremel w/ accs
3m #4010 tape
biocide(anti-algae)
blood red dye/additive(uv if avail but must still be blood red w/o lights)
uv dye/additive(if avail)
2x d-tek high-flow 1/2" fittings
grey primer paint (3-4 cans)
flat & low-gloss black paint (3-4 cans)
dark/blood red paint (3-4 cans)
clear coat paint (2 cans)

again i would like to find these at one store but i know this isn't possible.. so the fewer stores the better.. and cheaper is better since im still on a tight budget ><

direct links please.
online only im iced/snowed in for a while!

estores should take cc or google checkout as i dont do paypal!


multiple stores ok.. would just like to not buy from 10 different stores here and pay more in shipping then i did for the stuff >_>
Limited Edition
(13 items)
 
  
CPUMotherboardRAMHard Drive
x2 3600+ Brissy ECS 6100SM-M 1.5GB DDR 667 250GB Seagate SataII 
Optical DriveOSMonitorKeyboard
Lite-on CDRW Windows XP Home NEC 21" CRT Logitech Media Style 
PowerCaseMouseMouse Pad
Corsair HX520W Lian-Li A05B Reaper XTrac Ripper XXL 
  hide details  
Reply
Limited Edition
(13 items)
 
  
CPUMotherboardRAMHard Drive
x2 3600+ Brissy ECS 6100SM-M 1.5GB DDR 667 250GB Seagate SataII 
Optical DriveOSMonitorKeyboard
Lite-on CDRW Windows XP Home NEC 21" CRT Logitech Media Style 
PowerCaseMouseMouse Pad
Corsair HX520W Lian-Li A05B Reaper XTrac Ripper XXL 
  hide details  
Reply
post #2 of 6
i dont think you'll be able to get all those in one place.. you're probably going to have to go to a few different sites/stores
 
FreeNAS Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 LGA2011 3960X  Asus Rampage IV Extreme Sapphire R9 290 + EK Nickle Plated Full Coverag... 32GB Samsung 30nm DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung SM951 NVMe w/ Angelwings PX-1 M.2 to PC... Samsung 850 EVO 500GB x2 RAID 0 EK Supremacy CPU Block + EK 360 XTX Rad Windows 7 Enterprise 
MonitorKeyboardPowerCase
LG 27UD68-P 27-Inch 4K UHD IPS Monitor with Fre... CM Storm Quickfire Pro Cooler Master SPH 1050W Lian Li PC-7F 
MouseAudioAudio
Razer DeathAdder Chroma Samson SR850 + Shure SE215 FocusRite 2i2 + Lepai LP-2020+ + Dayton Audio B652 
CPUCPUGraphicsRAM
Intel E5-2620 2.0 GHz 6-Core Intel E5-2620 2.0 GHz 6-Core AMD FirePro V5900 Samsung 64gb (16x4) ddr3 1333 pc3 10666 ECC  
Hard DriveHard DriveHard DriveOS
3 x 3TB Seagate HDD 2 x 4TB HGST NAS HDD 2 x 5 TB Western Digital HDD FreeNAS 9 
MonitorKeyboardPowerCase
Generic 22" Monitor HP Keyboard Stock HP Z820 850W PSU HP Z820 Case 
Mouse
HP Mouse 
  hide details  
Reply
 
FreeNAS Server
(13 items)
 
 
CPUMotherboardGraphicsRAM
Intel i7 LGA2011 3960X  Asus Rampage IV Extreme Sapphire R9 290 + EK Nickle Plated Full Coverag... 32GB Samsung 30nm DDR3 1600 
Hard DriveHard DriveCoolingOS
Samsung SM951 NVMe w/ Angelwings PX-1 M.2 to PC... Samsung 850 EVO 500GB x2 RAID 0 EK Supremacy CPU Block + EK 360 XTX Rad Windows 7 Enterprise 
MonitorKeyboardPowerCase
LG 27UD68-P 27-Inch 4K UHD IPS Monitor with Fre... CM Storm Quickfire Pro Cooler Master SPH 1050W Lian Li PC-7F 
MouseAudioAudio
Razer DeathAdder Chroma Samson SR850 + Shure SE215 FocusRite 2i2 + Lepai LP-2020+ + Dayton Audio B652 
CPUCPUGraphicsRAM
Intel E5-2620 2.0 GHz 6-Core Intel E5-2620 2.0 GHz 6-Core AMD FirePro V5900 Samsung 64gb (16x4) ddr3 1333 pc3 10666 ECC  
Hard DriveHard DriveHard DriveOS
3 x 3TB Seagate HDD 2 x 4TB HGST NAS HDD 2 x 5 TB Western Digital HDD FreeNAS 9 
MonitorKeyboardPowerCase
Generic 22" Monitor HP Keyboard Stock HP Z820 850W PSU HP Z820 Case 
Mouse
HP Mouse 
  hide details  
Reply
post #3 of 6
Hi darkninja.

As iandroo stated, it may be difficult to assemble this shopping list in one location.

Here are the places that I have found to be reputable and enexpensive (without a lon-term hunt).
  • 15ft of c-channel molding: Automotive store (door molding)
  • 5x 120x25mm fans @ high cfm: Petra's
  • black/carbon psu sleeving kit: HSC (local to me), but an electronics liquidation center will have bulk.
  • 14ft 1/2" tubing: Petra's
  • 7ft of clear/red anti-kink coils: Petra's
  • 8x worm hose clamps: Local hardware store
  • 2x120mm rad grill: not cheap... but MNPC Tech has some great ones
  • cheap dremel w/ accs: Big box store, or local hardware
  • 3m #4010 tape: Local Paint store
  • biocide(anti-algae): Petra's
  • blood red dye/additive(uv if avail but must still be blood red w/o lights)
    uv dye/additive(if avail):
    I use FLuid XP... but it costs. Food dye may work, but you may not get the "Blood Red"
  • 2x d-tek high-flow 1/2": fittings: Petras
  • grey primer paint (3-4 cans): Local paint store
  • flat & low-gloss black paint (3-4 cans): Local paint store
  • dark/blood red paint (3-4 cans): Local paint store
  • clear coat paint (2 cans): Local paint store

Sorry... I know you wanted a one-stop shopping list...
Flux
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K GA-P67A-UD7 GTX 580 2 x 2GB Corsair 
Hard DriveOptical DriveOSMonitor
C300 (OS), Velociraptor (storage) Lite-On W7 64-bit Pro Samsung 275T 
KeyboardPowerCaseMouse
Black Widow Ult. Silverstone DA750 Lian Li T60 R.A.T. 7 
Mouse Pad
Q-Pad 
  hide details  
Reply
Flux
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K GA-P67A-UD7 GTX 580 2 x 2GB Corsair 
Hard DriveOptical DriveOSMonitor
C300 (OS), Velociraptor (storage) Lite-On W7 64-bit Pro Samsung 275T 
KeyboardPowerCaseMouse
Black Widow Ult. Silverstone DA750 Lian Li T60 R.A.T. 7 
Mouse Pad
Q-Pad 
  hide details  
Reply
post #4 of 6
I dont think you can find a "cheaper" dremel than this
http://www.harborfreight.com/cpi/cta...emnumber=94076
(I wouldnt build a house with it but it works fine for modding)

mnpctech has a pretty good deal on molding
http://www.mnpctech.com/UChannel.html
post #5 of 6
Thread Starter 
i'll have to be getting all this online.. ice storm here and i wont be able to get out until its completely gone :/ which can take a week if not more >_<

so online links to best prices is best.

dremel i have already bought.

so i still gotta find the rest..

direct links is a + all those who help are getting +Rep


i'll have to be getting all this online.. ice storm here and i wont be able to get out until its completely gone :/ which can take a week if not more >_<

so online links to best prices is best.

dremel i have already bought.

so i still gotta find the rest..

direct links is a + all those who help are getting +Rep

edit: what ive got so far:
Petra's
Tubing 7/16" MasterKleer 14ft
C-Channel Molding 11ft

SVC
4x CM 120mm Fans

Performance-PC's
blood red dye
3M #4010 Tape



complete total including tax/shipping $66.46

of course thats excluding the dremel.


whats left to get..

15ft of c-channel molding
4x 120x25mm fans @ high cfm
black/carbon psu sleeving kit
14ft 1/2" tubing
7ft of clear/red anti-kink coils
8x worm hose clamps
2x120mm rad grill
cheap dremel w/ accs
3m #4010 tape
biocide(anti-algae)
blood red dye

2x d-tek high-flow 1/2" fittings
grey primer paint (3-4 cans)
flat & low-gloss black paint (3-4 cans)
dark/blood red paint (3-4 cans)
clear coat paint (2 cans)
Limited Edition
(13 items)
 
  
CPUMotherboardRAMHard Drive
x2 3600+ Brissy ECS 6100SM-M 1.5GB DDR 667 250GB Seagate SataII 
Optical DriveOSMonitorKeyboard
Lite-on CDRW Windows XP Home NEC 21" CRT Logitech Media Style 
PowerCaseMouseMouse Pad
Corsair HX520W Lian-Li A05B Reaper XTrac Ripper XXL 
  hide details  
Reply
Limited Edition
(13 items)
 
  
CPUMotherboardRAMHard Drive
x2 3600+ Brissy ECS 6100SM-M 1.5GB DDR 667 250GB Seagate SataII 
Optical DriveOSMonitorKeyboard
Lite-on CDRW Windows XP Home NEC 21" CRT Logitech Media Style 
PowerCaseMouseMouse Pad
Corsair HX520W Lian-Li A05B Reaper XTrac Ripper XXL 
  hide details  
Reply
post #6 of 6
Quote:
Originally Posted by markkleb View Post
I dont think you can find a "cheaper" dremel than this
http://www.harborfreight.com/cpi/cta...emnumber=94076
(I wouldnt build a house with it but it works fine for modding)
Please, nobody get this ^^ dremel wanna-be!!! For cutting metals, forget it!!! The second the wheel hits the metal, it stops. If you are designing cakes, it's perfect!

If you are going to go with harbor freight, spend the extra $10 & get This One. It's just a bit more heavy duty than the first one & has 4 speeds (although I really believe it's way slower than advertised).

PS. Sorry to threadjack here "LF", it just needs to be known about that Rotary Tool.. Good luck with your mod!
Into the Abyss
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6700 @ 3.6 Asus P5K Deluxe Wifi eVGA 8800GT KO 4x1GB Tracer PC2-8500 
Hard DriveOptical DriveOSMonitor
2x74GB Raptor+1.5TB Samsung F1s DVD-RW Vista Ultimate x64 Samsung 22" 
KeyboardPowerCaseMouse
M$ Elite FSP Group (Fortron) FX Series FX700-GLN-E Antec 900 (CyberDruid Custom) M$ Elite 
  hide details  
Reply
Into the Abyss
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Q6700 @ 3.6 Asus P5K Deluxe Wifi eVGA 8800GT KO 4x1GB Tracer PC2-8500 
Hard DriveOptical DriveOSMonitor
2x74GB Raptor+1.5TB Samsung F1s DVD-RW Vista Ultimate x64 Samsung 22" 
KeyboardPowerCaseMouse
M$ Elite FSP Group (Fortron) FX Series FX700-GLN-E Antec 900 (CyberDruid Custom) M$ Elite 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › modding supplys.. where's the cheapest place?