Overclock.net › Forums › Cooling › Water Cooling › How do you mount a pump onto the case?
New Posts  All Forums:Forum Nav:

How do you mount a pump onto the case?

post #1 of 16
Thread Starter 
Hey guys, I'm going to set up my WCing system soon and have a question about the pump. How do you guys mount it? I got petra's jelly absorbant thingy lol and would like to know how you guys mount it onto the case? I was thinking of using vel-cro and attaching it onto the case without drilling holes or anything.
None of the Above
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 - OC to 3.6 GHz DFI Lanparty DK P35 XFX 8800GTS 512MB 2x1gb G.Skill Hz @ 1000mhz + another 4GB 
Hard DriveOSMonitorKeyboard
500GB WD5000AAKS Windows XP Pro 22" Samsung and 50" Sharp LCD G15 Rev 2 
PowerCaseMouse
Ultra 600W Antec 900 Logitech VX 
  hide details  
Reply
None of the Above
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 - OC to 3.6 GHz DFI Lanparty DK P35 XFX 8800GTS 512MB 2x1gb G.Skill Hz @ 1000mhz + another 4GB 
Hard DriveOSMonitorKeyboard
500GB WD5000AAKS Windows XP Pro 22" Samsung and 50" Sharp LCD G15 Rev 2 
PowerCaseMouse
Ultra 600W Antec 900 Logitech VX 
  hide details  
Reply
post #2 of 16
it'd help to know what pump
Limited Edition
(13 items)
 
  
CPUMotherboardRAMHard Drive
x2 3600+ Brissy ECS 6100SM-M 1.5GB DDR 667 250GB Seagate SataII 
Optical DriveOSMonitorKeyboard
Lite-on CDRW Windows XP Home NEC 21" CRT Logitech Media Style 
PowerCaseMouseMouse Pad
Corsair HX520W Lian-Li A05B Reaper XTrac Ripper XXL 
  hide details  
Reply
Limited Edition
(13 items)
 
  
CPUMotherboardRAMHard Drive
x2 3600+ Brissy ECS 6100SM-M 1.5GB DDR 667 250GB Seagate SataII 
Optical DriveOSMonitorKeyboard
Lite-on CDRW Windows XP Home NEC 21" CRT Logitech Media Style 
PowerCaseMouseMouse Pad
Corsair HX520W Lian-Li A05B Reaper XTrac Ripper XXL 
  hide details  
Reply
post #3 of 16
Velcro works pretty well, I wouldn't put that gel pad under a DDC, the base on those get pretty hot you want a little air under them...What I usually do is put rubber washers under the mounting holes and hard mount with bolts and
springs, takes all the vibration out...A D-5 you can mount almost any way...

You can see a spring and washer mount on one of my DDC's here...

My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
post #4 of 16
Thread Starter 
http://www.petrastechshop.com/laddcwpeddto.html
Sorry
I don't have the pump as of yet, but does it have to be secure well or just simply vel-cro with it is fine?
None of the Above
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 - OC to 3.6 GHz DFI Lanparty DK P35 XFX 8800GTS 512MB 2x1gb G.Skill Hz @ 1000mhz + another 4GB 
Hard DriveOSMonitorKeyboard
500GB WD5000AAKS Windows XP Pro 22" Samsung and 50" Sharp LCD G15 Rev 2 
PowerCaseMouse
Ultra 600W Antec 900 Logitech VX 
  hide details  
Reply
None of the Above
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 - OC to 3.6 GHz DFI Lanparty DK P35 XFX 8800GTS 512MB 2x1gb G.Skill Hz @ 1000mhz + another 4GB 
Hard DriveOSMonitorKeyboard
500GB WD5000AAKS Windows XP Pro 22" Samsung and 50" Sharp LCD G15 Rev 2 
PowerCaseMouse
Ultra 600W Antec 900 Logitech VX 
  hide details  
Reply
post #5 of 16
Ira-k, that system is one intimidating beast.
Ethergate II
(15 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-3930K @ 3.4GHZ ASUS Rampage IV Extreme AMD Radeon HD 7970 AMD Radeon HD 7970 
RAMHard DriveCoolingOS
320GB DDR 1600 Intel 550 SSD @ 480GB Asetek 550 Water Cooler Windows 7 Professional 
MonitorKeyboardPowerCase
BenQ 24" 120hz T Logitech G19 ASUS Toughpower 1200W Antec DF-85 
MouseMouse PadAudio
Saitek Cyborg RAT7 Func Industries Logitech Z6000 
  hide details  
Reply
Ethergate II
(15 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-3930K @ 3.4GHZ ASUS Rampage IV Extreme AMD Radeon HD 7970 AMD Radeon HD 7970 
RAMHard DriveCoolingOS
320GB DDR 1600 Intel 550 SSD @ 480GB Asetek 550 Water Cooler Windows 7 Professional 
MonitorKeyboardPowerCase
BenQ 24" 120hz T Logitech G19 ASUS Toughpower 1200W Antec DF-85 
MouseMouse PadAudio
Saitek Cyborg RAT7 Func Industries Logitech Z6000 
  hide details  
Reply
post #6 of 16
Quote:
Originally Posted by puzzledazn View Post
http://www.petrastechshop.com/laddcwpeddto.html
Sorry
I don't have the pump as of yet, but does it have to be secure well or just simply vel-cro with it is fine?
It will come with a peel and stick raubber mounting pad about a 1/2" thick...Peel one side and stick it on the pump then cut out th ecenter with a razor or something leaving about an inch on either side, then peel it off and stick it on and you will be fine...That way the bottom is open to the air and its still plenty to hold it on...

^^^Thanks......My new open bench makes that look like a noob rig...
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
post #7 of 16
Just place the jelly thing to the bottom of the pump, and screw the pump down.

With out knowing if you have the pump on the top of the case, bottom side etc.. we cannot give more specifics.

For mine (difference pump, same mounting) I found my case had several holes at the bottom that were the perfect size, and put a screw through the pump mount, jell, case, and fastened a washer and bolt to hold it down.
    
CPUMotherboardGraphicsRAM
C2D T7100 1.8 ghz (undervolted) ummm... Dell Intel X3100 2 x 1gb 667mhz 
Hard DriveOptical DriveOSMonitor
Fujitsu 7200 RPM 120gb CD-RW/DVD dual boot Vista business 1440x900 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
C2D T7100 1.8 ghz (undervolted) ummm... Dell Intel X3100 2 x 1gb 667mhz 
Hard DriveOptical DriveOSMonitor
Fujitsu 7200 RPM 120gb CD-RW/DVD dual boot Vista business 1440x900 
  hide details  
Reply
post #8 of 16
Thread Starter 
ALright, lemme give it a try. Thanks everyone!
None of the Above
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 - OC to 3.6 GHz DFI Lanparty DK P35 XFX 8800GTS 512MB 2x1gb G.Skill Hz @ 1000mhz + another 4GB 
Hard DriveOSMonitorKeyboard
500GB WD5000AAKS Windows XP Pro 22" Samsung and 50" Sharp LCD G15 Rev 2 
PowerCaseMouse
Ultra 600W Antec 900 Logitech VX 
  hide details  
Reply
None of the Above
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 - OC to 3.6 GHz DFI Lanparty DK P35 XFX 8800GTS 512MB 2x1gb G.Skill Hz @ 1000mhz + another 4GB 
Hard DriveOSMonitorKeyboard
500GB WD5000AAKS Windows XP Pro 22" Samsung and 50" Sharp LCD G15 Rev 2 
PowerCaseMouse
Ultra 600W Antec 900 Logitech VX 
  hide details  
Reply
post #9 of 16
Quote:
Originally Posted by trueg50 View Post
Just place the jelly thing to the bottom of the pump, and screw the pump down.
DO NOT USE THE GEL PAD WITH DDC ULTRAS!!
or if you do, ensure there is room underneath for the pump to breath otherwise they will overheat!

If you want to safely mount a DDC Ultra and give it room to breath, grab a set of the DDC Anti -Vibration mounts and mount it like so:

    
CPUMotherboardGraphicsRAM
Q6600 Asus P5K3 Leaktek 8800GTS 640Mb 2GB DDR3 
Hard DriveOptical DriveOSMonitor
500GB SATA DVD-RW XP 2x 19" Widescreens 
KeyboardPowerCaseMouse
Logitech Coolermaster 850W Lasered & Painted Akasa Omega Microsoft Habu 
Mouse Pad
Bugs Bunny! 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Q6600 Asus P5K3 Leaktek 8800GTS 640Mb 2GB DDR3 
Hard DriveOptical DriveOSMonitor
500GB SATA DVD-RW XP 2x 19" Widescreens 
KeyboardPowerCaseMouse
Logitech Coolermaster 850W Lasered & Painted Akasa Omega Microsoft Habu 
Mouse Pad
Bugs Bunny! 
  hide details  
Reply
post #10 of 16
Marcus, is that that the PC-2000 from Lian Li?

I'm using a modified PC-2000 for my computer, the PC4-1036BK.
Ethergate II
(15 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-3930K @ 3.4GHZ ASUS Rampage IV Extreme AMD Radeon HD 7970 AMD Radeon HD 7970 
RAMHard DriveCoolingOS
320GB DDR 1600 Intel 550 SSD @ 480GB Asetek 550 Water Cooler Windows 7 Professional 
MonitorKeyboardPowerCase
BenQ 24" 120hz T Logitech G19 ASUS Toughpower 1200W Antec DF-85 
MouseMouse PadAudio
Saitek Cyborg RAT7 Func Industries Logitech Z6000 
  hide details  
Reply
Ethergate II
(15 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Core i7-3930K @ 3.4GHZ ASUS Rampage IV Extreme AMD Radeon HD 7970 AMD Radeon HD 7970 
RAMHard DriveCoolingOS
320GB DDR 1600 Intel 550 SSD @ 480GB Asetek 550 Water Cooler Windows 7 Professional 
MonitorKeyboardPowerCase
BenQ 24" 120hz T Logitech G19 ASUS Toughpower 1200W Antec DF-85 
MouseMouse PadAudio
Saitek Cyborg RAT7 Func Industries Logitech Z6000 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › How do you mount a pump onto the case?