Originally Posted by ericeod
Disconnect the 24 pin power from the motherboard. Then remove the battery and press the power button to disipate any residual power. Then set the clear mos jumper and leave it until tomorow. Then put it back together and see if it boots with bios defaults.
Why would you leave it until tommorow, if you set the BIOS jumper to clear, it's instantly gone. Also, taking out the battery without power already clears the BIOS, you're suggesting two things that does the same thing.
What you should do is take out the 24 pin power connector from the mobo, take out your battery, plug the 24 pin power connector back in, and boot up.
NOTE: This clears your bios so all your overclocks and every setting is put back to default, including you disable the floppy drive. So after you do this, go right into bios and disable your floopy. Then boot up, after everything is stable, then put your overclocks back up.