Overclock.net › Forums › Intel › Intel CPUs › E6300 won't go past 2.6 GHz
New Posts  All Forums:Forum Nav:

E6300 won't go past 2.6 GHz - Page 16

post #151 of 259
Possibly not. The two steppings for that chip are B2 and L2.

1.4v should be fine, but check with other E6300 owners first. I'm going by Intel's spec sheet. I run my Q6600 at 1.43v 24/7, and it has the same spec sheet vCore limit.

I'm sure 1 tick on the NB won't make it run TOO hot. You shouldn't need more than 1 tick.
DankoniQuad
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.4GHz (425x8) 1.392 vCore Gigabyte EP45-UD3P EVGA GTX 280 Mushkin Redline 2x2GB DDR2-1000 @ 1063MHz 5-5-5-12 
Hard DriveOptical DriveOSMonitor
2xWD6400AAKS RAID0 + Samsung F3EG 2TB + 500GB Ext. Samsung SH-S203B Vista Ultimate 64-bit Acer B233HUbmidhz 
PowerCase
Corsair TX750W Antec Nine Hundred 
  hide details  
Reply
DankoniQuad
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.4GHz (425x8) 1.392 vCore Gigabyte EP45-UD3P EVGA GTX 280 Mushkin Redline 2x2GB DDR2-1000 @ 1063MHz 5-5-5-12 
Hard DriveOptical DriveOSMonitor
2xWD6400AAKS RAID0 + Samsung F3EG 2TB + 500GB Ext. Samsung SH-S203B Vista Ultimate 64-bit Acer B233HUbmidhz 
PowerCase
Corsair TX750W Antec Nine Hundred 
  hide details  
Reply
post #152 of 259
Thread Starter 
Looks like I have the LV stepping;


I'd like a few more people to look at this thread, to get a few more opinions, and E6300 owners...

Ok, Well, I'll put my RAM to 2.2v, NB +0.1v and the CPU on 1.4v (or one step more) and see how it goes...

Appriciate the help man, +Rep!
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8P67 Pro GTX 560Ti 2GB & 8800GTS G92 512MB for PhysX 16GB Kingston HyperX 
Hard DriveOSMonitorPower
Corsair M4 128GB SSD + 1TB WD Windows 7 Pro 64bit 24" Acer & two 19" Samsungs Corsair 650TX 
Case
CM HAF 922 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8P67 Pro GTX 560Ti 2GB & 8800GTS G92 512MB for PhysX 16GB Kingston HyperX 
Hard DriveOSMonitorPower
Corsair M4 128GB SSD + 1TB WD Windows 7 Pro 64bit 24" Acer & two 19" Samsungs Corsair 650TX 
Case
CM HAF 922 
  hide details  
Reply
post #153 of 259
That pic u have just put up is that with 1.4v in the bios....?
Gaming
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9450 @ 3.6ghz Asus P5K PREMIUM Sapphire HD5970 + GTX260 physX 8GB BUFFALO FIRESTIX 8500 = 1150mhz 
Hard DriveOptical DriveOSMonitor
seagate 160gb ide 160gb seagate sata dvdrom sata x64 W.7600 RTM 20" 1680x1050 & 23'' 2048x1 
PowerCaseMouse
XCILIO 850W coolermaster CM590 logitech NX80 
  hide details  
Reply
Gaming
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9450 @ 3.6ghz Asus P5K PREMIUM Sapphire HD5970 + GTX260 physX 8GB BUFFALO FIRESTIX 8500 = 1150mhz 
Hard DriveOptical DriveOSMonitor
seagate 160gb ide 160gb seagate sata dvdrom sata x64 W.7600 RTM 20" 1680x1050 & 23'' 2048x1 
PowerCaseMouse
XCILIO 850W coolermaster CM590 logitech NX80 
  hide details  
Reply
post #154 of 259
i have a L2 6300 too

heres what im running:



edit:woops i think i already posted this in this thread
   
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T Black Edition Thuban 3.2...  Gigabyte MB Model : GA-890FXA-UD5, NB : AMD 89... Radeon HD 6850 1GB 256-bit GDDR5 775MHz 960 SPU... G.SKILL Sniper 8GB (2 x 4GB) 240-Pin DDR3 SDRAM... 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 HD204UI 2TB 32MB Cache SATA... LG WH10LS30 10X Blu-ray Burner - LightScribe Su... XIGMATEK LOKI SD963 92mm HYPRO Bearing CPU Cooler  Windows 7 Ultimate 
MonitorMonitorMonitorKeyboard
Hanns-G 28'' 3ms Full HD 1080P 1920 x 1200LCD M... Samsung 19" 1440x900 Envision 22" 1680x1050 RAZER Lycosa Black USB Wired Gaming Keyboard 
PowerCaseMouseMouse Pad
TOPOWER Galaxis MX Series GAPS-500MX 500W ATX12... COOLER MASTER Storm Scout RAZER DeathAdder Precision Optical Gaming Mouse... RocketFish (Speed+Control) 
Audio
Altec Lansing VS4221 2.1 35 Watts Three-Piece C... 
  hide details  
Reply
   
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T Black Edition Thuban 3.2...  Gigabyte MB Model : GA-890FXA-UD5, NB : AMD 89... Radeon HD 6850 1GB 256-bit GDDR5 775MHz 960 SPU... G.SKILL Sniper 8GB (2 x 4GB) 240-Pin DDR3 SDRAM... 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 HD204UI 2TB 32MB Cache SATA... LG WH10LS30 10X Blu-ray Burner - LightScribe Su... XIGMATEK LOKI SD963 92mm HYPRO Bearing CPU Cooler  Windows 7 Ultimate 
MonitorMonitorMonitorKeyboard
Hanns-G 28'' 3ms Full HD 1080P 1920 x 1200LCD M... Samsung 19" 1440x900 Envision 22" 1680x1050 RAZER Lycosa Black USB Wired Gaming Keyboard 
PowerCaseMouseMouse Pad
TOPOWER Galaxis MX Series GAPS-500MX 500W ATX12... COOLER MASTER Storm Scout RAZER DeathAdder Precision Optical Gaming Mouse... RocketFish (Speed+Control) 
Audio
Altec Lansing VS4221 2.1 35 Watts Three-Piece C... 
  hide details  
Reply
post #155 of 259
Quote:
Originally Posted by kkbob33 View Post
i have a L2 6300 too

heres what im running:



edit:woops i think i already posted this in this thread
See his Vcore? That's what you want yours to say.
    
MotherboardGraphicsRAMRAM
TF8200 A2+ Radeon HD 5770 G. Skill G. Skill 
Hard DriveOptical DriveCoolingOS
ST3500418AS Samsung DVDRW Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
S231HLbid @ 1080p Logitech G110 Antec NeoHE 500 XION Predator 
MouseAudio
Microsoft Intellimouse 3.0 ALC888 , Saitek GH 30 
  hide details  
Reply
    
MotherboardGraphicsRAMRAM
TF8200 A2+ Radeon HD 5770 G. Skill G. Skill 
Hard DriveOptical DriveCoolingOS
ST3500418AS Samsung DVDRW Corsair H50 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
S231HLbid @ 1080p Logitech G110 Antec NeoHE 500 XION Predator 
MouseAudio
Microsoft Intellimouse 3.0 ALC888 , Saitek GH 30 
  hide details  
Reply
post #156 of 259
I oc'd my b2 to e6300 @ 2.8ghz, 1.3875 volts in bios, 1.328 in cpu-z and 1.28 under load.
I haven't tried to go further, 2.8 is gewd enough for me
Smee 2.0
(14 items)
 
  
Reply
Smee 2.0
(14 items)
 
  
Reply
post #157 of 259
Thread Starter 
Quote:
Originally Posted by skunksmash View Post
That pic u have just put up is that with 1.4v in the bios....?
No, that's with it at; 1.34375v
With that, I'm stable at 2.8GHz.

Quote:
Originally Posted by kkbob33 View Post
i have a L2 6300 too

heres what im running:



edit:woops i think i already posted this in this thread
Did you raise anything else, like MCH, or RAM voltage?

Quote:
Originally Posted by budgetgamer View Post
See his Vcore? That's what you want yours to say.
Yeah, Alright, I'll give it a go! Just the vCore, or anything else to raise?

Quote:
Originally Posted by Sm3gH3ad View Post
I oc'd my b2 to e6300 @ 2.8ghz, 1.3875 volts in bios, 1.328 in cpu-z and 1.28 under load.
I haven't tried to go further, 2.8 is gewd enough for me
I'm stable at 2.8GHz right now. Yeah, it's fast, but 3GHz would be nice, you know!

-----------------------

Ok, so there's a few things flying around...

1) My vCore should be set to 1.4v (lower / Higher?)

2) Should I knock my MCH up a notch, will it get much warmer and cause problems?

3) Should I set my RAM to 2.2v, they may run stable at a lower voltage?
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8P67 Pro GTX 560Ti 2GB & 8800GTS G92 512MB for PhysX 16GB Kingston HyperX 
Hard DriveOSMonitorPower
Corsair M4 128GB SSD + 1TB WD Windows 7 Pro 64bit 24" Acer & two 19" Samsungs Corsair 650TX 
Case
CM HAF 922 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8P67 Pro GTX 560Ti 2GB & 8800GTS G92 512MB for PhysX 16GB Kingston HyperX 
Hard DriveOSMonitorPower
Corsair M4 128GB SSD + 1TB WD Windows 7 Pro 64bit 24" Acer & two 19" Samsungs Corsair 650TX 
Case
CM HAF 922 
  hide details  
Reply
post #158 of 259
if you look in the pic at the smart gaurdian it says my voltages. my ram is undervolted 2.1. my nb is 1.41.

1.4 vcore should get you 3000 mhz. in my experience with this chip, anything higher takes alot more voltage to keep stable. not worth it IMO. 3200mhz took 1.48 vcore. just supersillius
   
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T Black Edition Thuban 3.2...  Gigabyte MB Model : GA-890FXA-UD5, NB : AMD 89... Radeon HD 6850 1GB 256-bit GDDR5 775MHz 960 SPU... G.SKILL Sniper 8GB (2 x 4GB) 240-Pin DDR3 SDRAM... 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 HD204UI 2TB 32MB Cache SATA... LG WH10LS30 10X Blu-ray Burner - LightScribe Su... XIGMATEK LOKI SD963 92mm HYPRO Bearing CPU Cooler  Windows 7 Ultimate 
MonitorMonitorMonitorKeyboard
Hanns-G 28'' 3ms Full HD 1080P 1920 x 1200LCD M... Samsung 19" 1440x900 Envision 22" 1680x1050 RAZER Lycosa Black USB Wired Gaming Keyboard 
PowerCaseMouseMouse Pad
TOPOWER Galaxis MX Series GAPS-500MX 500W ATX12... COOLER MASTER Storm Scout RAZER DeathAdder Precision Optical Gaming Mouse... RocketFish (Speed+Control) 
Audio
Altec Lansing VS4221 2.1 35 Watts Three-Piece C... 
  hide details  
Reply
   
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1090T Black Edition Thuban 3.2...  Gigabyte MB Model : GA-890FXA-UD5, NB : AMD 89... Radeon HD 6850 1GB 256-bit GDDR5 775MHz 960 SPU... G.SKILL Sniper 8GB (2 x 4GB) 240-Pin DDR3 SDRAM... 
Hard DriveOptical DriveCoolingOS
SAMSUNG EcoGreen F4 HD204UI 2TB 32MB Cache SATA... LG WH10LS30 10X Blu-ray Burner - LightScribe Su... XIGMATEK LOKI SD963 92mm HYPRO Bearing CPU Cooler  Windows 7 Ultimate 
MonitorMonitorMonitorKeyboard
Hanns-G 28'' 3ms Full HD 1080P 1920 x 1200LCD M... Samsung 19" 1440x900 Envision 22" 1680x1050 RAZER Lycosa Black USB Wired Gaming Keyboard 
PowerCaseMouseMouse Pad
TOPOWER Galaxis MX Series GAPS-500MX 500W ATX12... COOLER MASTER Storm Scout RAZER DeathAdder Precision Optical Gaming Mouse... RocketFish (Speed+Control) 
Audio
Altec Lansing VS4221 2.1 35 Watts Three-Piece C... 
  hide details  
Reply
post #159 of 259
Thread Starter 
Quote:
Originally Posted by kkbob33 View Post
if you look in the pic at the smart gaurdian it says my voltages. my ram is undervolted 2.1. my nb is 1.41.

1.4 vcore should get you 3000 mhz. in my experience with this chip, anything higher takes alot more voltage to keep stable. not worth it IMO. 3200mhz took 1.48 vcore. just supersillius
I only want to get to 3GHz...

Ok, so I'll leave the Vcore at 1.4v, I'll add +0.1 to the RAM, as I'm not OC that much more, maybe +0.2v

and I'll up the MCH one step!

I'll see how that goes!

Thanks!
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8P67 Pro GTX 560Ti 2GB & 8800GTS G92 512MB for PhysX 16GB Kingston HyperX 
Hard DriveOSMonitorPower
Corsair M4 128GB SSD + 1TB WD Windows 7 Pro 64bit 24" Acer & two 19" Samsungs Corsair 650TX 
Case
CM HAF 922 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K ASUS P8P67 Pro GTX 560Ti 2GB & 8800GTS G92 512MB for PhysX 16GB Kingston HyperX 
Hard DriveOSMonitorPower
Corsair M4 128GB SSD + 1TB WD Windows 7 Pro 64bit 24" Acer & two 19" Samsungs Corsair 650TX 
Case
CM HAF 922 
  hide details  
Reply
post #160 of 259
Almost there =)
DankoniQuad
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.4GHz (425x8) 1.392 vCore Gigabyte EP45-UD3P EVGA GTX 280 Mushkin Redline 2x2GB DDR2-1000 @ 1063MHz 5-5-5-12 
Hard DriveOptical DriveOSMonitor
2xWD6400AAKS RAID0 + Samsung F3EG 2TB + 500GB Ext. Samsung SH-S203B Vista Ultimate 64-bit Acer B233HUbmidhz 
PowerCase
Corsair TX750W Antec Nine Hundred 
  hide details  
Reply
DankoniQuad
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.4GHz (425x8) 1.392 vCore Gigabyte EP45-UD3P EVGA GTX 280 Mushkin Redline 2x2GB DDR2-1000 @ 1063MHz 5-5-5-12 
Hard DriveOptical DriveOSMonitor
2xWD6400AAKS RAID0 + Samsung F3EG 2TB + 500GB Ext. Samsung SH-S203B Vista Ultimate 64-bit Acer B233HUbmidhz 
PowerCase
Corsair TX750W Antec Nine Hundred 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › E6300 won't go past 2.6 GHz