Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N-D 750i Guide
New Posts  All Forums:Forum Nav:

Asus P5N-D 750i Guide - Page 168

post #1671 of 3402
Quote:
Originally Posted by go4life View Post
dude! 13c idle! how cold do you have it in your room?
why not jump to 3.6-3.8ghz? (since you have such good temps)
and no waterblock is out for this board! but 33-35c is nothing on a motherboard

I just hit 3.60 @ vcore 1.39 (pencil mod) I mean that board is very very stable then b4 and the idle & load on that setting look:





WatchamacaLLit
(13 items)
 
  
CPUMotherboardGraphicsRAM
lapped Q6600 2.40 GO @ 3.60 v1.39 24/7 p5nD Dual BFG 8800 GTS's OC 640mb 4 GB Corsair Dominators 1066MHz 
Hard DriveOSKeyboardPower
Total: WD 1Tb ( two sata's ) windows 7 x64 sAiteK corsair 850 watts 
CaseMouseMouse Pad
Antec 1200 raZor DiaMond Back nOne 
  hide details  
Reply
WatchamacaLLit
(13 items)
 
  
CPUMotherboardGraphicsRAM
lapped Q6600 2.40 GO @ 3.60 v1.39 24/7 p5nD Dual BFG 8800 GTS's OC 640mb 4 GB Corsair Dominators 1066MHz 
Hard DriveOSKeyboardPower
Total: WD 1Tb ( two sata's ) windows 7 x64 sAiteK corsair 850 watts 
CaseMouseMouse Pad
Antec 1200 raZor DiaMond Back nOne 
  hide details  
Reply

Gear mentioned in this thread:

post #1672 of 3402
Thread Starter 
wow great! and at only 1.39v vcore! you should reach 4ghz on that chip! (but probably not in this motherboard though...)

EDIT: for 4ghz you would probably need 1.55v though
    
CPUMotherboardGraphicsRAM
|AMD Phenom II X6 1100T @ 4ghz| |Asus Crosshair IV Formula| |EVGA 780TI Classified| |4x2gb Corsair XMS 1600mhz CL7| 
Hard DriveCoolingOSMonitor
|840 Pro 256gb| |WD Red 2tb| |Corsair H50| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 100hz| 
KeyboardPowerCaseMouse
|Logitech G810 Orion Spectrum RGB| |Cooler Master 700w Silent Pro Gold| |Antec 1200 Orange mod| |Logitech G502 Proteus Spectrum RGB|  
AudioAudioAudio
|JBL L890 speakers| |Emotiva XDA-2 receiver| |2x Advanced Acoustic mono amp @ 200w 8ohm| 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
|AMD Phenom II X6 1100T @ 4ghz| |Asus Crosshair IV Formula| |EVGA 780TI Classified| |4x2gb Corsair XMS 1600mhz CL7| 
Hard DriveCoolingOSMonitor
|840 Pro 256gb| |WD Red 2tb| |Corsair H50| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 100hz| 
KeyboardPowerCaseMouse
|Logitech G810 Orion Spectrum RGB| |Cooler Master 700w Silent Pro Gold| |Antec 1200 Orange mod| |Logitech G502 Proteus Spectrum RGB|  
AudioAudioAudio
|JBL L890 speakers| |Emotiva XDA-2 receiver| |2x Advanced Acoustic mono amp @ 200w 8ohm| 
  hide details  
Reply
post #1673 of 3402
Quote:
Originally Posted by go4life View Post
wow great! and at only 1.39v vcore! you should reach 4ghz on that chip! (but probably not in this motherboard though...)

EDIT: for 4ghz you would probably need 1.55v though


Still @ the phaze of testing 3.60. Will reply back when everything stable.
WatchamacaLLit
(13 items)
 
  
CPUMotherboardGraphicsRAM
lapped Q6600 2.40 GO @ 3.60 v1.39 24/7 p5nD Dual BFG 8800 GTS's OC 640mb 4 GB Corsair Dominators 1066MHz 
Hard DriveOSKeyboardPower
Total: WD 1Tb ( two sata's ) windows 7 x64 sAiteK corsair 850 watts 
CaseMouseMouse Pad
Antec 1200 raZor DiaMond Back nOne 
  hide details  
Reply
WatchamacaLLit
(13 items)
 
  
CPUMotherboardGraphicsRAM
lapped Q6600 2.40 GO @ 3.60 v1.39 24/7 p5nD Dual BFG 8800 GTS's OC 640mb 4 GB Corsair Dominators 1066MHz 
Hard DriveOSKeyboardPower
Total: WD 1Tb ( two sata's ) windows 7 x64 sAiteK corsair 850 watts 
CaseMouseMouse Pad
Antec 1200 raZor DiaMond Back nOne 
  hide details  
Reply
post #1674 of 3402
Thread Starter 
very well.
2 hours should be enough!
Then move to 3.7ghz+
    
CPUMotherboardGraphicsRAM
|AMD Phenom II X6 1100T @ 4ghz| |Asus Crosshair IV Formula| |EVGA 780TI Classified| |4x2gb Corsair XMS 1600mhz CL7| 
Hard DriveCoolingOSMonitor
|840 Pro 256gb| |WD Red 2tb| |Corsair H50| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 100hz| 
KeyboardPowerCaseMouse
|Logitech G810 Orion Spectrum RGB| |Cooler Master 700w Silent Pro Gold| |Antec 1200 Orange mod| |Logitech G502 Proteus Spectrum RGB|  
AudioAudioAudio
|JBL L890 speakers| |Emotiva XDA-2 receiver| |2x Advanced Acoustic mono amp @ 200w 8ohm| 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
|AMD Phenom II X6 1100T @ 4ghz| |Asus Crosshair IV Formula| |EVGA 780TI Classified| |4x2gb Corsair XMS 1600mhz CL7| 
Hard DriveCoolingOSMonitor
|840 Pro 256gb| |WD Red 2tb| |Corsair H50| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 100hz| 
KeyboardPowerCaseMouse
|Logitech G810 Orion Spectrum RGB| |Cooler Master 700w Silent Pro Gold| |Antec 1200 Orange mod| |Logitech G502 Proteus Spectrum RGB|  
AudioAudioAudio
|JBL L890 speakers| |Emotiva XDA-2 receiver| |2x Advanced Acoustic mono amp @ 200w 8ohm| 
  hide details  
Reply
post #1675 of 3402
Quote:
Originally Posted by go4life View Post
dude! 13c idle! how cold do you have it in your room?
why not jump to 3.6-3.8ghz? (since you have such good temps)
and no waterblock is out for this board! but 33-35c is nothing on a motherboard



Damn no waterblock for the Northbridge for the p5nd!

I know if or when they do come out with this block it will have it 100% more stable. If I'm getting 33c to 36c on the MB, prolly the water block will give it a minus -10c to -15c or even more who knows. LoL

Quote:
Originally Posted by go4life View Post
very well.
2 hours should be enough!
Then move to 3.7ghz+

go4life, So you are saying 2 hours of stability is good on full load?
WatchamacaLLit
(13 items)
 
  
CPUMotherboardGraphicsRAM
lapped Q6600 2.40 GO @ 3.60 v1.39 24/7 p5nD Dual BFG 8800 GTS's OC 640mb 4 GB Corsair Dominators 1066MHz 
Hard DriveOSKeyboardPower
Total: WD 1Tb ( two sata's ) windows 7 x64 sAiteK corsair 850 watts 
CaseMouseMouse Pad
Antec 1200 raZor DiaMond Back nOne 
  hide details  
Reply
WatchamacaLLit
(13 items)
 
  
CPUMotherboardGraphicsRAM
lapped Q6600 2.40 GO @ 3.60 v1.39 24/7 p5nD Dual BFG 8800 GTS's OC 640mb 4 GB Corsair Dominators 1066MHz 
Hard DriveOSKeyboardPower
Total: WD 1Tb ( two sata's ) windows 7 x64 sAiteK corsair 850 watts 
CaseMouseMouse Pad
Antec 1200 raZor DiaMond Back nOne 
  hide details  
Reply
post #1676 of 3402
Thread Starter 
Quote:
Originally Posted by sha View Post
Damn no waterblock for the Northbridge for the p5nd!

I know if or when they do come out with this block it will have it 100% more stable. If I'm getting 33c to 36c on the MB, prolly the water block will give it a minus -10c to -15c or even more who knows. LoL
I know:/

Water is really nice, at least on nvidia motherboars since they are so damn hot! (not yours though lol)


Quote:
Originally Posted by sha View Post
go4life, So you are saying 2 hours of stability is good on full load?
yes, that will give you a good clue if its stable or not, then move to 3.7ghz and test! set vcore to 1.5v in bios. Then after 2 more hours of testing, if its stable try 3.8ghz
    
CPUMotherboardGraphicsRAM
|AMD Phenom II X6 1100T @ 4ghz| |Asus Crosshair IV Formula| |EVGA 780TI Classified| |4x2gb Corsair XMS 1600mhz CL7| 
Hard DriveCoolingOSMonitor
|840 Pro 256gb| |WD Red 2tb| |Corsair H50| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 100hz| 
KeyboardPowerCaseMouse
|Logitech G810 Orion Spectrum RGB| |Cooler Master 700w Silent Pro Gold| |Antec 1200 Orange mod| |Logitech G502 Proteus Spectrum RGB|  
AudioAudioAudio
|JBL L890 speakers| |Emotiva XDA-2 receiver| |2x Advanced Acoustic mono amp @ 200w 8ohm| 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
|AMD Phenom II X6 1100T @ 4ghz| |Asus Crosshair IV Formula| |EVGA 780TI Classified| |4x2gb Corsair XMS 1600mhz CL7| 
Hard DriveCoolingOSMonitor
|840 Pro 256gb| |WD Red 2tb| |Corsair H50| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 100hz| 
KeyboardPowerCaseMouse
|Logitech G810 Orion Spectrum RGB| |Cooler Master 700w Silent Pro Gold| |Antec 1200 Orange mod| |Logitech G502 Proteus Spectrum RGB|  
AudioAudioAudio
|JBL L890 speakers| |Emotiva XDA-2 receiver| |2x Advanced Acoustic mono amp @ 200w 8ohm| 
  hide details  
Reply
post #1677 of 3402
Sha what kid of temps are you seeing on your video card during these test?

I have noticed that as long as my video card remains cool (below 60) that my motherboard temps will stay down under 39.
I am in the process of making a water block for my board, but it is taking longer than I want it to do to my lack of proper machining tools (i.e. drill press instead of a mill.)

Go4, I booted last night at 4.05 (1800) and everything worked but could not pass
OCCT test, got errors first in core 0 and then in core1.

I had my voltages cranked up vcore 1.4 HT NB 1.5
(edit)
I will try again after I finish the block, My board temps went way up when folding on the GPU
Pa's Puter
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 i930@4.2ghz. Gigabyte EX58-UD4P EVGA GTX 970 FTW + GSkill DDR3-1600 12 gig 
Hard DriveOptical DriveCoolingOS
Samsung Evo SSD  DVDROM EK supreme HF Cu gold plated/ XSPC 480 Windows 7 Pro. 64 bit 
MonitorKeyboardPowerCase
LG 27EA63 IPS monitor merc stealth Corsair TX850 Corsair 700D 
MouseMouse PadAudio
logitech G5 Rocketfish dual surface Creative Xfx extreme and Zalman 5.1 headphones 
  hide details  
Reply
Pa's Puter
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 i930@4.2ghz. Gigabyte EX58-UD4P EVGA GTX 970 FTW + GSkill DDR3-1600 12 gig 
Hard DriveOptical DriveCoolingOS
Samsung Evo SSD  DVDROM EK supreme HF Cu gold plated/ XSPC 480 Windows 7 Pro. 64 bit 
MonitorKeyboardPowerCase
LG 27EA63 IPS monitor merc stealth Corsair TX850 Corsair 700D 
MouseMouse PadAudio
logitech G5 Rocketfish dual surface Creative Xfx extreme and Zalman 5.1 headphones 
  hide details  
Reply
post #1678 of 3402
Quote:
Originally Posted by slickwilly View Post
Sha what kid of temps are you seeing on your video card during these test?

I have noticed that as long as my video card remains cool (below 60) that my motherboard temps will stay down under 39.
I am in the process of making a water block for my board, but it is taking longer than I want it to do to my lack of proper machining tools (i.e. drill press instead of a mill.)

The most I saw was 55c to 58c playing crysis that's cuz I have the video card fan on 80% speed.
Edited by sha - 3/25/09 at 8:00am
WatchamacaLLit
(13 items)
 
  
CPUMotherboardGraphicsRAM
lapped Q6600 2.40 GO @ 3.60 v1.39 24/7 p5nD Dual BFG 8800 GTS's OC 640mb 4 GB Corsair Dominators 1066MHz 
Hard DriveOSKeyboardPower
Total: WD 1Tb ( two sata's ) windows 7 x64 sAiteK corsair 850 watts 
CaseMouseMouse Pad
Antec 1200 raZor DiaMond Back nOne 
  hide details  
Reply
WatchamacaLLit
(13 items)
 
  
CPUMotherboardGraphicsRAM
lapped Q6600 2.40 GO @ 3.60 v1.39 24/7 p5nD Dual BFG 8800 GTS's OC 640mb 4 GB Corsair Dominators 1066MHz 
Hard DriveOSKeyboardPower
Total: WD 1Tb ( two sata's ) windows 7 x64 sAiteK corsair 850 watts 
CaseMouseMouse Pad
Antec 1200 raZor DiaMond Back nOne 
  hide details  
Reply
post #1679 of 3402
Thread Starter 
Quote:
Originally Posted by slickwilly View Post
Go4, I booted last night at 4.05 (1800) and everything worked but could not pass
OCCT test, got errors first in core 0 and then in core1.

I had my voltages cranked up vcore 1.4 HT NB 1.5
(edit)
I will try again after I finish the block, My board temps went way up when folding on the GPU
nice! what was the vcore under load?
Also, how long did it last before it failed?
    
CPUMotherboardGraphicsRAM
|AMD Phenom II X6 1100T @ 4ghz| |Asus Crosshair IV Formula| |EVGA 780TI Classified| |4x2gb Corsair XMS 1600mhz CL7| 
Hard DriveCoolingOSMonitor
|840 Pro 256gb| |WD Red 2tb| |Corsair H50| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 100hz| 
KeyboardPowerCaseMouse
|Logitech G810 Orion Spectrum RGB| |Cooler Master 700w Silent Pro Gold| |Antec 1200 Orange mod| |Logitech G502 Proteus Spectrum RGB|  
AudioAudioAudio
|JBL L890 speakers| |Emotiva XDA-2 receiver| |2x Advanced Acoustic mono amp @ 200w 8ohm| 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
|AMD Phenom II X6 1100T @ 4ghz| |Asus Crosshair IV Formula| |EVGA 780TI Classified| |4x2gb Corsair XMS 1600mhz CL7| 
Hard DriveCoolingOSMonitor
|840 Pro 256gb| |WD Red 2tb| |Corsair H50| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 100hz| 
KeyboardPowerCaseMouse
|Logitech G810 Orion Spectrum RGB| |Cooler Master 700w Silent Pro Gold| |Antec 1200 Orange mod| |Logitech G502 Proteus Spectrum RGB|  
AudioAudioAudio
|JBL L890 speakers| |Emotiva XDA-2 receiver| |2x Advanced Acoustic mono amp @ 200w 8ohm| 
  hide details  
Reply
post #1680 of 3402
vcore stays at 1.38, I guess the pencil mod work after all.
One minute. I will try again after I get the WB on.

I only want that kind of OC for playing Crysis
Pa's Puter
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 i930@4.2ghz. Gigabyte EX58-UD4P EVGA GTX 970 FTW + GSkill DDR3-1600 12 gig 
Hard DriveOptical DriveCoolingOS
Samsung Evo SSD  DVDROM EK supreme HF Cu gold plated/ XSPC 480 Windows 7 Pro. 64 bit 
MonitorKeyboardPowerCase
LG 27EA63 IPS monitor merc stealth Corsair TX850 Corsair 700D 
MouseMouse PadAudio
logitech G5 Rocketfish dual surface Creative Xfx extreme and Zalman 5.1 headphones 
  hide details  
Reply
Pa's Puter
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 i930@4.2ghz. Gigabyte EX58-UD4P EVGA GTX 970 FTW + GSkill DDR3-1600 12 gig 
Hard DriveOptical DriveCoolingOS
Samsung Evo SSD  DVDROM EK supreme HF Cu gold plated/ XSPC 480 Windows 7 Pro. 64 bit 
MonitorKeyboardPowerCase
LG 27EA63 IPS monitor merc stealth Corsair TX850 Corsair 700D 
MouseMouse PadAudio
logitech G5 Rocketfish dual surface Creative Xfx extreme and Zalman 5.1 headphones 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › Intel › Intel Motherboards › Asus P5N-D 750i Guide