Apparently my system has now decided that it hates 1600Mhz FSB. I put the NB and HT up to 1.46, and left the VCore at 1.40 (which is what I'm using for 1550Mhz FSB). It crashed after about ten seconds into Prime95. I upped the VCore to 1.425, and this time it crashed about a second after I started Prime95. I put the NB and HT back down to 1.44 (which is what they were at when I could run Prime95 for about ten minutes at 1600Mhz), and the system crashed during start-up.
post #1851 of 3402
5/4/09 at 1:09am