Originally Posted by Rabiez
Why the hell can I not clock my q9400 2.66ghz quad past 3.2ghz!!!? I want to hit at least 3.6 considering I have the cooler and plenty of fans in my case. As soon as I hit over 1600 on my FSB it will not boot windows 7. Please help me!
VCORE AT 3.625
I hope you mean 1.625, and thats even thats high..
You might have hit a FSB hole, try bumping it a bit higher and see if it will boot, i got mine up to 1950 at one point, stable enough to run Super pi 1m a few times, but couldn't get it to pass 32m. Ran completely stable at 1700 with 1.34ish on both the NB and HTT (not even sure if i needed that much, just boosted it up there and it worked so i didn't bother trying to bring it down)
Keep an eye on HW monitor and make sure your cpu voltage is even close to where you think it is, before i pencil modded mine, i couldnt get it past 1.28 no matter what i set in bios.Edited by Jelah - 7/29/10 at 6:38pm