Originally Posted by Rabiez
Ive tried to lower the multiplier and raise the bus. I have tried all of these things. Do I have to raise the ram votage even though it is unlinked? This really sucks. I don't know what to do. The cpu is great. All 4 cores run ice cold until I hit 1600. Then it boots up fine and when it gets to the windows7 start up screen it reboots before i get to the desktop.
Rabiez how much DRAM voltage are you running?
You will need more than stock with all four ram slots filled
Have you tried OCing with only 1 stick in the board?
Originally Posted by eggybacon
Hi Guys, needing some help overclocking my Intel Q8200 on my P5N-D. i have been able to change the FSB and when booting, the bios says 2.8 (which is what im trying to get it too) would much prefer 3.0-3.2 but just want it to work. keep getting boot error when booting OC'd, when i reset to default, there is no problem!
Need more info, are you able to boot in to the BIOS with it OCed or does it
not boot up at all
i.e. will it boot to BIOS, will it boot the the self test screen,
will it boot to the windows log in then crash