Originally Posted by JLewis187
lordikon yo man please supply me with what your Voltage settings are for HT, NB, SB .. Please bro thanks.
Heh, been awhile since I last checked and I'm not around the computer right now. I believe HT was 1.42, NB 1.46, SB was left at auto. Memory timings are insanely stubborn with this board too. Try and find a setting where the memory tests fine, and then keep the memory close to that speed until you find your best OC, then start upping the memory speeds later.
Originally Posted by bitmonx
Well, I was trying to use manual OC but the bios always revert back to Auto.
What am I doing wrong here? What could be the reason for that?
Hey go4life would you happen to have a few minutes to go on messenger......?
Try putting it in manual, but leaving stuff at stock settings. Does that still cause a restart? Usually if it reverts back then your OC settings are too extreme or just plain off. Start near stock and move from there.
Also guys, make sure you put the fan on the northbridge if you're upping the NB voltage, that thing gets hot and really needs the fan. Clip a small piece of paper between the heatsink clips and the heatsink on the top so that no air blows off the NB towards the CPU, which disrupts airflow.