[QUOTE=DIRTYDUCK;4909990]ok lets see here.
fsb 450 x8 multi
vcore 1.4265 (no vmod yet)
Dram 1.97 (max=2.0)
ram timings 5-5-5-15 have also run at 5-5-5-18
amb air 75f
not only do I have a dtec fuzion v2 but its on a bong cooler so I have all the CPU cooling I will need. I have tried bumping voltages up pretty high to try to get it higher but much over 3.6 and it wont post.
I have the ram at 800
I would try upping HT to 1.40 and lower NB to 1.40. See if it gets more stable.
Try upping your RAMspeed a bit. This clocking really is a babystep thing and what works on my system doesnt necessarily work on yours.
I installed Dominator 1066mHz 2x2GB and had to underclock them to get stable. 5-5-5-15 2T(stock timings).
I`m running x8 multi 1910(477)mHz FSB and 1019(509)mHz RAM Unlinked but that doesnt mean it will work for you.
My FSB: DRAM now runs 15:16.
My Vcore is of no use for you since you have a 65nm CPU. You should be higher than my 1.28750 though.
IMO you should match HT and NB kinda even. Works for me.
A bit higher on SB.