Overclock.net › Forums › AMD › AMD CPUs › M2N32 SLI-5000BE-AIR Cooling
New Posts  All Forums:Forum Nav:

M2N32 SLI-5000BE-AIR Cooling

post #1 of 13
Thread Starter 
Idle: 28MB, 32CPU..........Load: 29MB, 57-58CPU
vcore:=1.5375, DDR=2.1v, Peg Link Disabled, PCIE locked @100Mhz

CPU<>NB HT=4x, DDR freq=667, 5-5-5-15-(2T auto), trc=26
Channel A+B Clock Skew=normal

CPU vcore Offset=(disabled)
CPU<>NB HT=1.4v
NB<>SB HT=1.35v
NB<>PCIE=1.25v
SB<>PCIE (auto)
SB STBY Core Voltage (1.7v..max)




:swearing:
This is best I got so far...any EXPERT help, from those with similar setups would be sorely appreciated.
post #2 of 13
Those are some high voltages and the temps are getting to be a bit high... Have you tried lowering the FSB and increasing the multi?
OC in progress...
(13 items)
 
  
CPUMotherboardGraphicsRAM
PII x3 720 BE @3.8ghz TA790gx 128m GTS 250 @ 800/1944/1230 2gb Gskill DDR2 1066 
OSPowerCase
W7/xp Corsair 400CX CM Mystique 
  hide details  
Reply
OC in progress...
(13 items)
 
  
CPUMotherboardGraphicsRAM
PII x3 720 BE @3.8ghz TA790gx 128m GTS 250 @ 800/1944/1230 2gb Gskill DDR2 1066 
OSPowerCase
W7/xp Corsair 400CX CM Mystique 
  hide details  
Reply
post #3 of 13
Thread Starter 
anything other than this crashes orthos in less than 2 mins ....yea i tried about 100 diff combos..this is longest stable orthos above 3.0 ghz 15x only
post #4 of 13
Those temps are sweet!
Wish I could get temps as low as that.
I got the same mobo with a Phenom 9500 and a Thermalright Ultra-120 eXtreme cooler and no sides on the case - I get cpu temps of 50-55 and mobo temps of 45
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom 9500 M2N32 SLI Deluxe MSI Nvidia GeForce 7600GS 256mb 2GB corsair xms2 667 
Hard DriveOSMonitorKeyboard
2x 160gb Seagate SATA2 Ubuntu64 / Winxp64 CMV T38D x2 yes 
PowerMouseMouse Pad
550w yes no 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom 9500 M2N32 SLI Deluxe MSI Nvidia GeForce 7600GS 256mb 2GB corsair xms2 667 
Hard DriveOSMonitorKeyboard
2x 160gb Seagate SATA2 Ubuntu64 / Winxp64 CMV T38D x2 yes 
PowerMouseMouse Pad
550w yes no 
  hide details  
Reply
post #5 of 13
Of course - this is all relevant to ambient temps - which being the middle of summer here in NZ are 25c in my office!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom 9500 M2N32 SLI Deluxe MSI Nvidia GeForce 7600GS 256mb 2GB corsair xms2 667 
Hard DriveOSMonitorKeyboard
2x 160gb Seagate SATA2 Ubuntu64 / Winxp64 CMV T38D x2 yes 
PowerMouseMouse Pad
550w yes no 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom 9500 M2N32 SLI Deluxe MSI Nvidia GeForce 7600GS 256mb 2GB corsair xms2 667 
Hard DriveOSMonitorKeyboard
2x 160gb Seagate SATA2 Ubuntu64 / Winxp64 CMV T38D x2 yes 
PowerMouseMouse Pad
550w yes no 
  hide details  
Reply
post #6 of 13
Quote:
Originally Posted by ghot View Post
anything other than this crashes orthos in less than 2 mins ....yea i tried about 100 diff combos..this is longest stable orthos above 3.0 ghz 15x only
Try upping your HT multi- I've heard a slightly higher HT speed can increase stability. I can get my to around 1500mhz before it starts to cause trouble, but I think it may depend on the mobo.
OC in progress...
(13 items)
 
  
CPUMotherboardGraphicsRAM
PII x3 720 BE @3.8ghz TA790gx 128m GTS 250 @ 800/1944/1230 2gb Gskill DDR2 1066 
OSPowerCase
W7/xp Corsair 400CX CM Mystique 
  hide details  
Reply
OC in progress...
(13 items)
 
  
CPUMotherboardGraphicsRAM
PII x3 720 BE @3.8ghz TA790gx 128m GTS 250 @ 800/1944/1230 2gb Gskill DDR2 1066 
OSPowerCase
W7/xp Corsair 400CX CM Mystique 
  hide details  
Reply
post #7 of 13
Thread Starter 
Ok here's where I'm at now....and still need to figure out how to squeeze more outta RAM.



and here's all the combos I tried in my 3.2Ghz quest:

................5x HT combos..........................................4x HT combos........................

........16x200Mhz = 1000Mhz HT Bus.......................12.5x256Mhz = 1024Mhz HT Bus
........15.5x207Mhz = 1035Mhz HT Bus.......................12x267Mhz = 1068Mhz HT Bus
........15x214Mhz = 1070Mhz HT Bus.......................11.5x279Mhz = 1116Mhz HT Bus
........14.5x221Mhz = 1105Mhz HT Bus.......................11x291Mhz = 1164Mhz HT Bus
........14x229Mhz = 1145Mhz HT Bus.......................10.5x305Mhz = 1220Mhz HT Bus
........13.5x238Mhz = 1190Mhz HT Bus
........13x247Mhz = 1235Mhz HT Bus

All this took 28 hours straight, all run at: 1.5vcore, PCIE buses locked at 100Mhz, NB<>SB HT Freq. locked at 200Mhz, trc=26, tfrc=3, max async=8ns, Advanced Voltages (default), AI Clock Skew (auto/normal), SLI Ready memory (disabled), RAM timings at (default) w/ 2.1vcore [Corsair TWIN2X2048-8500C5D (1066Mhz)]

All the 4x HT combos made the Memory Bus (in Everest) 640-ish...which Windows did NOT like one bit.
All the 5x HT Combos were mostly stable for me.....max load temp 55C on Zalman 9500a set on max.
Anyways...time for a nice 12 hour nap

In the meantime if anyone has some suggestions for OC'ing RAM etc., or why CPU-Z shows RAM freq and CPU/divider different than Everest shows it, let me know....thx
post #8 of 13
Hey have you gone into the chipset settings yet? If not set the second from the top option to x4 i've been game stable at 3.25 in vista and 3.44 in xp doing so. my board with both chips i've had seems to like x4 HT when i start upping fsb.
The Mars Project
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 4.1Ghz for now Foxconn Mars 4870 X2 Gskill 2 x 2GB 
Hard DriveOSMonitorPower
2x750F1's raid0 on PERC 5i Win 7 64bit Samsung T240 Antec Quattro 850w 
CaseMouseMouse Pad
TT Armor MX-518 Ma Desk 
  hide details  
Reply
The Mars Project
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 4.1Ghz for now Foxconn Mars 4870 X2 Gskill 2 x 2GB 
Hard DriveOSMonitorPower
2x750F1's raid0 on PERC 5i Win 7 64bit Samsung T240 Antec Quattro 850w 
CaseMouseMouse Pad
TT Armor MX-518 Ma Desk 
  hide details  
Reply
post #9 of 13
Thread Starter 
under the pic is all the 4x combos Ive tried bro they all hard locked Windows....I'm happy with a stable 3.2Ghz.......now I need to work on speedin up that RAM ^^

All us po' folk with Zalmans have to stop at 1.5vcore and the 4x combos want MORE lol
post #10 of 13
Quote:
Originally Posted by ghot View Post
under the pic is all the 4x combos Ive tried bro they all hard locked Windows....I'm happy with a stable 3.2Ghz.......now I need to work on speedin up that RAM ^^

All us po' folk with Zalmans have to stop at 1.5vcore and the 4x combos want MORE lol
lol i hear ya. I also want to add tho. I'm pretty sure i wrecked my last chip which had a higher tdp than these ones we're using now by running at 1.56+ vcore. There may still be stuff you need to tweak in order to run with less volts. lowering your memory speed could also give u some more Mhz but u want fast ram so goodluck.

editid you update your bios or sumthin? lol just realised i have no xx.5 options on the multi
The Mars Project
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 4.1Ghz for now Foxconn Mars 4870 X2 Gskill 2 x 2GB 
Hard DriveOSMonitorPower
2x750F1's raid0 on PERC 5i Win 7 64bit Samsung T240 Antec Quattro 850w 
CaseMouseMouse Pad
TT Armor MX-518 Ma Desk 
  hide details  
Reply
The Mars Project
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 4.1Ghz for now Foxconn Mars 4870 X2 Gskill 2 x 2GB 
Hard DriveOSMonitorPower
2x750F1's raid0 on PERC 5i Win 7 64bit Samsung T240 Antec Quattro 850w 
CaseMouseMouse Pad
TT Armor MX-518 Ma Desk 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD CPUs
Overclock.net › Forums › AMD › AMD CPUs › M2N32 SLI-5000BE-AIR Cooling