Overclock.net › Forums › Components › Memory › i need your help
New Posts  All Forums:Forum Nav:

i need your help

post #1 of 6
Thread Starter 
i buy the ddr2 1066 evo one geil i put it one and when i went to the cpuz i saw dram frequency only 369 with 5.5.5.15 timing.my mothrboaed is p5k se and the cpu is e8400 3.3 and i have vista 32 bit.can you tell me what i have to do to work inthe right numbers my memory
post #2 of 6
go into your bios and set it to 1066 instead of 800
post #3 of 6
Thread Starter 
i did it but nothing changed.my fsb:dram is 1:1 and i notice that if i put 370 fsb per il cpu automaticaly the dram frequency goes to 370.excuse me for my english i am from greece
post #4 of 6
what is your cpu x multiplyer and what your ram is set to in bios (200/266/333/400/513)
post #5 of 6
Try these settings below but perform a hard-clear of your CMOS first. Power down the computer completely, shut off the main PSU switch then unplug power cord. Press the front power button several times to discharge the residual power. Remove the CMOS battery and leave it out for a good 10 minutes then put it back in then proceed with the BIOS settings:


CPU Ratio = 10
FSB = 333Mhz
DRAM = 1066Mhz
PCIE = 100Mhz
CPU vCore = 1.375v
DRAM Voltage = 2.1v
NB Voltage = 1.50v

MAX CPUID Value = Disabled
CPU Internal Thermal Control = Disabled
Enhanced C1 Control = Disabled
Virtualization Mode = Disabled
Intel SpeedStep = Disabled


If these settings are stable, lower the DRAM Voltage by 0.05 at a time until it becomes unstable and then raise it back up by 0.05v. Do the same for your NB Voltage.
New rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon64 X2 5000 BE @3.3GHz ASUS M2R32-MVP HD3870 512MB CrossFire GeIL Esoteria 4x1GB DDR2-1100 
Hard DriveOptical DriveOSMonitor
WD Raptor 150GB Lite-On LH-20A1L DVDRW Vista Ultimate 32-bit ViewSonic 22" HD LCD 1680x1050 
KeyboardPowerCaseMouse
Logitech Media Elite PC Power & Cooling Silencer 750W Quad TT Armor Extreme Full ATX Logitech G5 Laser 
  hide details  
Reply
New rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon64 X2 5000 BE @3.3GHz ASUS M2R32-MVP HD3870 512MB CrossFire GeIL Esoteria 4x1GB DDR2-1100 
Hard DriveOptical DriveOSMonitor
WD Raptor 150GB Lite-On LH-20A1L DVDRW Vista Ultimate 32-bit ViewSonic 22" HD LCD 1680x1050 
KeyboardPowerCaseMouse
Logitech Media Elite PC Power & Cooling Silencer 750W Quad TT Armor Extreme Full ATX Logitech G5 Laser 
  hide details  
Reply
post #6 of 6
Thread Starter 
i fix it but my core speed has fallen from 3.34 to 3.00 and my fsb:dram is 5:8
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › i need your help