Overclock.net › Forums › Intel › Intel - General › Suzanne is a faster woman every day...
New Posts  All Forums:Forum Nav:

Suzanne is a faster woman every day...

post #1 of 16
Thread Starter 
This is a thread I'm opening to discuss my overclock, which is finally getting off the ground.

425! 425x6 booted up and ran prime stable on both cores for long and short (1024&8K) FFT's. I guess the short isn't a big deal since I'm only FSB testing but I let it run anyway.

450! This board doesn't have any problems with that either. Ran Prime for half an hour and then decided that was enough. 450x7 is 3.15, x8 is 3.6, and that was my original target for an overclock, so a 450 FSB is brilliant.

450x7 wouldn't boot at 1.1125v, go figure.

EDITED GOALS:

Best FSB and memory performance without raising motherboard voltages. My board doesn't have MOSFET cooling or anything like that, and I don't want any accidents with the +.1v minimum adjustments.

Best Overclock on the CPU without passing 70 C in Prime on stock cooling or 1.3v in BIOS. Yes, I recognize these are a wimps settings, but this is my new baby, I have zero need for the speed, and there's always time to raise it later if I find the need or desire.
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
post #2 of 16
Thread Starter 
Last Settings during OC testing: 350x9=3150Mhz, Prime stable at 1.15v

350 FSB
DDR2 @ 700Mhz
5-5-5-18, 2t, tRD=8

CPU volts 1.1500 in BIOS, 1.12 after droop in Windows (weirdly, it's reliably showing 1.12v in all Windows software, whereas when I ran 400x8 it showed 1.11).

Only ran Prime about 10 mins, then set to 360 FSB, which isn't stable at all. So not sure about the above. It does appear to be a CPU issue though, the memory and FSB settings are fine.

03 28 08:

Booted into windows @ 378x9 = 3.4 Ghz, 1.1825 Vcore in BIOS. Temps finally nudge up about 3-4 C from where they are at stock. SuperPi runs under 14s, but not Prime Stable. Bah.

04 01 08:

Booted into Windows @ 400x9 = 3.6 Ghz, 1.25 Vcore in BIOS. Temps are higher (but that's because my wife put the heat on). No stability at all. 415x6 is stable with tRD = 7, though, so next try is 415x8 = 3.32, tomorrow after work.

04 03 08:

Below 400 FSB tRD=6 is stable with faster CAS latency set. So we're looking at 380 FSB now with a goal of 380x8=3.4ish Ghz as an overclock on the processor. Once that's stable perhaps we'll look for more.
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
post #3 of 16
Thread Starter 
Reserved for pictures and other whatnot.
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
post #4 of 16
Thread Starter 
Am I just way low on voltage, or should an E8400 get higher than 3.0 without raising volts? I've loosened the memory timings way up to try to ensure it isn't a RAM or MCH instability getting in the way. What is considered "stock" volts on E8400 (I've seen 1.225 and 1.15 listed)?
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
post #5 of 16
Keep on stress testing with as low voltage as possible then raise FSB...if it fails tune up a notch on the v-core...you could have a good cpu in your hands!
Quad Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.6Ghz @1.39v L733/ E8500 ASUS Blitz Formula SE 8800 GTS 512 G92 stable @818/1917/1107 4x1GB 800Mhz Transcend Axeram N 5-5-5-15 @1066Mhz 
Hard DriveOptical DriveOSMonitor
WD 320GB SATA II+250GB Hitachi 7200rpm IDE LG DVD-RW 3ple-Boot: SuSE 10.3 - XP x64 - Vista Ultimate x64 ASUS 22" VW222S 1680x1050 
KeyboardPowerCaseMouse
Logitech MX3000 Laser Thermaltake Toughpower 750W SLI Ready Thermaltake Armor V8003SWA with 25cm side fan Logitech G9 
Mouse Pad
Alienware 
  hide details  
Reply
Quad Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.6Ghz @1.39v L733/ E8500 ASUS Blitz Formula SE 8800 GTS 512 G92 stable @818/1917/1107 4x1GB 800Mhz Transcend Axeram N 5-5-5-15 @1066Mhz 
Hard DriveOptical DriveOSMonitor
WD 320GB SATA II+250GB Hitachi 7200rpm IDE LG DVD-RW 3ple-Boot: SuSE 10.3 - XP x64 - Vista Ultimate x64 ASUS 22" VW222S 1680x1050 
KeyboardPowerCaseMouse
Logitech MX3000 Laser Thermaltake Toughpower 750W SLI Ready Thermaltake Armor V8003SWA with 25cm side fan Logitech G9 
Mouse Pad
Alienware 
  hide details  
Reply
post #6 of 16
Thread Starter 
I have a new question:

Is it weird that every example of system instability manifests in a reboot? I never get errors in prime or anything, nor BSOD, I just get a black screen and a BIOS beep, then POST splash screen.

The only time I've ever seen an error was on Windows bootup (and weirdly enough when I tried Prime anyway, that time it tested stable).
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
post #7 of 16
This happens when you are way low on voltage.
Quad Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.6Ghz @1.39v L733/ E8500 ASUS Blitz Formula SE 8800 GTS 512 G92 stable @818/1917/1107 4x1GB 800Mhz Transcend Axeram N 5-5-5-15 @1066Mhz 
Hard DriveOptical DriveOSMonitor
WD 320GB SATA II+250GB Hitachi 7200rpm IDE LG DVD-RW 3ple-Boot: SuSE 10.3 - XP x64 - Vista Ultimate x64 ASUS 22" VW222S 1680x1050 
KeyboardPowerCaseMouse
Logitech MX3000 Laser Thermaltake Toughpower 750W SLI Ready Thermaltake Armor V8003SWA with 25cm side fan Logitech G9 
Mouse Pad
Alienware 
  hide details  
Reply
Quad Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.6Ghz @1.39v L733/ E8500 ASUS Blitz Formula SE 8800 GTS 512 G92 stable @818/1917/1107 4x1GB 800Mhz Transcend Axeram N 5-5-5-15 @1066Mhz 
Hard DriveOptical DriveOSMonitor
WD 320GB SATA II+250GB Hitachi 7200rpm IDE LG DVD-RW 3ple-Boot: SuSE 10.3 - XP x64 - Vista Ultimate x64 ASUS 22" VW222S 1680x1050 
KeyboardPowerCaseMouse
Logitech MX3000 Laser Thermaltake Toughpower 750W SLI Ready Thermaltake Armor V8003SWA with 25cm side fan Logitech G9 
Mouse Pad
Alienware 
  hide details  
Reply
post #8 of 16
Thread Starter 
Prime and 3DMark Stable:

360x9= 3.24 Ghz, at 1.18125vcore, 1.14 in Windows.

http://service.futuremark.com/compare?3dm06=5987361
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
post #9 of 16
Thread Starter 
UPDATE:

400x9 Posted and booted into Windows at 1.25 Vcore in BIOS, 1.22 in CPU-Z. Unfortunately it instant-crashed on Prime, indicating that that wasn't anywhere near stable, and that was my volts limit for now.

SO.

I have 415x6 memory stable with 4-4-4-12 830Mhz at tRD = 7. I still can't get any overclocked settings to POST at tRD = 6. By the way, does anyone have any idea what "Static Tread phase adjust" affects in my BIOS?
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
Suzanne
(13 items)
 
  
CPUMotherboardGraphicsRAM
Wolfdale 8400@Stock, 1.1125 Vcore, 1.07 post droop Gigabyte GA-p35-DS3L 8800GT (EVGA) OCZ DDR2 1066 
Hard DriveOptical DriveOSMonitor
Seagate 7200.10 250gb Samsung IDE XP Home SP2B Hanns G 17' 
KeyboardPowerCaseMouse
GE Ps2 PC Power and Cooling 610w NZXT hush (Black) Microsoft optical 
Mouse Pad
None 
  hide details  
Reply
post #10 of 16
Why not try 5 5 5 15 in RAM and up the voltage to stabilize your CPU?
Quad Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.6Ghz @1.39v L733/ E8500 ASUS Blitz Formula SE 8800 GTS 512 G92 stable @818/1917/1107 4x1GB 800Mhz Transcend Axeram N 5-5-5-15 @1066Mhz 
Hard DriveOptical DriveOSMonitor
WD 320GB SATA II+250GB Hitachi 7200rpm IDE LG DVD-RW 3ple-Boot: SuSE 10.3 - XP x64 - Vista Ultimate x64 ASUS 22" VW222S 1680x1050 
KeyboardPowerCaseMouse
Logitech MX3000 Laser Thermaltake Toughpower 750W SLI Ready Thermaltake Armor V8003SWA with 25cm side fan Logitech G9 
Mouse Pad
Alienware 
  hide details  
Reply
Quad Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 @ 3.6Ghz @1.39v L733/ E8500 ASUS Blitz Formula SE 8800 GTS 512 G92 stable @818/1917/1107 4x1GB 800Mhz Transcend Axeram N 5-5-5-15 @1066Mhz 
Hard DriveOptical DriveOSMonitor
WD 320GB SATA II+250GB Hitachi 7200rpm IDE LG DVD-RW 3ple-Boot: SuSE 10.3 - XP x64 - Vista Ultimate x64 ASUS 22" VW222S 1680x1050 
KeyboardPowerCaseMouse
Logitech MX3000 Laser Thermaltake Toughpower 750W SLI Ready Thermaltake Armor V8003SWA with 25cm side fan Logitech G9 
Mouse Pad
Alienware 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel - General
Overclock.net › Forums › Intel › Intel - General › Suzanne is a faster woman every day...