Overclock.net › Forums › Intel › Intel CPUs › Are my temps too high?
New Posts  All Forums:Forum Nav:

Are my temps too high?

post #1 of 3
Thread Starter 
Pentium D
2.66 GHz overclocked 50% to 4.0 GHz
Vcore is at 1.5

-------------------------------------------------

My idle temp is questionable because everything I have monitoring my temps says it's idling at 18C. So I ignore this temp and worry about load temps. My load temp while running ORTHOS and Prime95 is around 55C. Now, I am hesitant to believe this temp is accurate either, so I don't know if I should back off in my overclock or if I should regard this load temp as accurate. I never have outrageous temp spikes or anything either, just refreshes very slowly while running ORTHOS.

But are my temps getting to a dangerous level?
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
post #2 of 3
Im new here but I would say that 60-70 is something to worry about, 50's is Okay but you might want to get lower than that if you expect the processor to last longer.
post #3 of 3
Thread Starter 
Yeah, I agree with that. But I'm not sure if I should even trust that temp. While stress testing with ORTHOS the system just kinda reset and my Vcore was highlighted purple in the BIOS. Not sure what that meant, so I backed down to 3.9GHz where I knew I was stable, and now I am stress testing there.
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Are my temps too high?