Overclock.net › Forums › Intel › Intel CPUs › Freshly Installed Q6600 g0 .. results.. input needed
New Posts  All Forums:Forum Nav:

Freshly Installed Q6600 g0 .. results.. input needed

post #1 of 42
Thread Starter 
Ok i just installed a 8800gts 512 and q6600 G0...

my 3dmark went down to 10618 from around 12,444 after the new vid card / quad..

I ran a stress test for a few minutes and my temps on my quad never went over 46 at 100% load via everest..
My marks are below if that helps

Also. the new cpu cooler is a tuniq 120, and i installed it well not too much as5 etc etc...

Where is my scored f'ed up ? Is there something i need to do to fix my hardware problem if there is one ?






My 3dmark

Your system
3DMark Score VirtualMarks
10618 3DMarks
SM 2.0 Score VirtualMarks
4987 N/A
SM 3.0 Score VirtualMarks
5310 N/A
CPU Score VirtualMarks
2132
My900
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.4 GHz evga nForce 680i A1 LeadTek GTX 280 @ 705/1450/1200 4x1GB Super Tallent DDR2(800) 
Hard DriveOptical DriveOSMonitor
Seagate 250gbx2 LG 18X DVD-RW / 300GB WD VelociRaptor Vista x64 Samsung 245BW 
KeyboardPowerCaseMouse
Logitech ThermalTake Toughpower 650w Antec 900 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
My900
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.4 GHz evga nForce 680i A1 LeadTek GTX 280 @ 705/1450/1200 4x1GB Super Tallent DDR2(800) 
Hard DriveOptical DriveOSMonitor
Seagate 250gbx2 LG 18X DVD-RW / 300GB WD VelociRaptor Vista x64 Samsung 245BW 
KeyboardPowerCaseMouse
Logitech ThermalTake Toughpower 650w Antec 900 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
post #2 of 42
What is the bandwidth according to CPU-Z of your GPU?
Does CPU-Z say that all 4 cores are online?
Did you disable C1e and SpeedStep in Bios?
post #3 of 42
Thread Starter 
Selection (Processor #1) Cores 2 Threads 2

"Cache"
L1 DATA 4x32
L1 Inst 4 x 32
Level 2: 2 x 4096
Level 3:9greyed out)

c1e and speedstep disabled in bios
My900
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.4 GHz evga nForce 680i A1 LeadTek GTX 280 @ 705/1450/1200 4x1GB Super Tallent DDR2(800) 
Hard DriveOptical DriveOSMonitor
Seagate 250gbx2 LG 18X DVD-RW / 300GB WD VelociRaptor Vista x64 Samsung 245BW 
KeyboardPowerCaseMouse
Logitech ThermalTake Toughpower 650w Antec 900 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
My900
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.4 GHz evga nForce 680i A1 LeadTek GTX 280 @ 705/1450/1200 4x1GB Super Tallent DDR2(800) 
Hard DriveOptical DriveOSMonitor
Seagate 250gbx2 LG 18X DVD-RW / 300GB WD VelociRaptor Vista x64 Samsung 245BW 
KeyboardPowerCaseMouse
Logitech ThermalTake Toughpower 650w Antec 900 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
post #4 of 42
Quote:
Originally Posted by psik0.k1m View Post
Selection (Processor #1) Cores 2 Threads 2

"Cache"
L1 DATA 4x32
L1 Inst 4 x 32
Level 2: 2 x 4096
Level 3:9greyed out)

c1e and speedstep disabled in bios
should be showing 4 threads. One for each core..
Just a comp.
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 GO @ 3.6 Ghz 1.48 v bios Asus P5K eVGA 9800GTX 770/1944/2300 4 GB Patriot Extreme PC2-6400 
Hard DriveOptical DriveOSMonitor
150 GB WD Raptor 500 GB Barracuda 160 GB IDE HD LITE-ON DVD-RW Dual boot Vista / XP 32 Bit Samsung 226BW 22" WS 
KeyboardPowerCaseMouse
Emachines Antec Truepower Trio 650 W Antec Nine Hundred Microsoft Comfort Optical Mouse 3000 
Mouse Pad
Regular 
  hide details  
Reply
Just a comp.
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 GO @ 3.6 Ghz 1.48 v bios Asus P5K eVGA 9800GTX 770/1944/2300 4 GB Patriot Extreme PC2-6400 
Hard DriveOptical DriveOSMonitor
150 GB WD Raptor 500 GB Barracuda 160 GB IDE HD LITE-ON DVD-RW Dual boot Vista / XP 32 Bit Samsung 226BW 22" WS 
KeyboardPowerCaseMouse
Emachines Antec Truepower Trio 650 W Antec Nine Hundred Microsoft Comfort Optical Mouse 3000 
Mouse Pad
Regular 
  hide details  
Reply
post #5 of 42
Quote:
Originally Posted by psik0.k1m View Post
Selection (Processor #1) Cores 2 Threads 2

"Cache"
L1 DATA 4x32
L1 Inst 4 x 32
Level 2: 2 x 4096
Level 3:9greyed out)

c1e and speedstep disabled in bios
Should be 4 cores and 4 threads....
Did you clear CMOS after installation?
post #6 of 42
Thread Starter 
wow.. so installed new drivers for everything and it totally borked my setup....

I got a bios error after installed the nvidia nforce drivers.

Error 0xc0000225 after installing the new board drivers... vista disk wouldnt even allow me to repair all last night..

Then this morning i powerd-up.. same error.. but my vista disked booted me into windows this time.. so i went back to my pre nforce updated driver restore point... so now it works

Could there be a problem with my board not having the newest updated bios ? Like conflicting with my new 512 gts ?

Im so confused.. ughh..
My900
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.4 GHz evga nForce 680i A1 LeadTek GTX 280 @ 705/1450/1200 4x1GB Super Tallent DDR2(800) 
Hard DriveOptical DriveOSMonitor
Seagate 250gbx2 LG 18X DVD-RW / 300GB WD VelociRaptor Vista x64 Samsung 245BW 
KeyboardPowerCaseMouse
Logitech ThermalTake Toughpower 650w Antec 900 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
My900
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.4 GHz evga nForce 680i A1 LeadTek GTX 280 @ 705/1450/1200 4x1GB Super Tallent DDR2(800) 
Hard DriveOptical DriveOSMonitor
Seagate 250gbx2 LG 18X DVD-RW / 300GB WD VelociRaptor Vista x64 Samsung 245BW 
KeyboardPowerCaseMouse
Logitech ThermalTake Toughpower 650w Antec 900 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
post #7 of 42
Yes you need to update the bios. Look under device manager and see what processor it says you have. Also, did you do uninstall the nvidia display drivers and then install the newest for you card?
    
CPUMotherboardGraphicsRAM
Intel 3930k @ stock  Asus P9x79ws EVGA 670 + EVGA 560 Ti 16gb Gskill 2133 @ 1.6v 
Hard DriveOptical DriveOSMonitor
Samsung 830 256Gb + 3.75 Tb ya Win8 5 - 24'' Dell U2412M 
KeyboardPowerCaseMouse
nope... entirely overrated Seasonic 1250w p182 of course... 
Mouse Pad
no 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel 3930k @ stock  Asus P9x79ws EVGA 670 + EVGA 560 Ti 16gb Gskill 2133 @ 1.6v 
Hard DriveOptical DriveOSMonitor
Samsung 830 256Gb + 3.75 Tb ya Win8 5 - 24'' Dell U2412M 
KeyboardPowerCaseMouse
nope... entirely overrated Seasonic 1250w p182 of course... 
Mouse Pad
no 
  hide details  
Reply
post #8 of 42
Thread Starter 
Quote:
Originally Posted by aleiro View Post
Yes you need to update the bios. Look under device manager and see what processor it says you have. Also, did you do uninstall the nvidia display drivers and then install the newest for you card?
Yeah i did.. i used my driver cleaner too..

Umm.. so you guys think i should upgrade my bios to the most current one ? (i am p28) the newest one is p32.....

And what method of flashing do you guys use ?


Edit: It shows as a q6600 in cpuZ.. and under the system properties in vista.. however i did not look at it in the device manager.. would that be different ? And or give you more info ?
My900
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.4 GHz evga nForce 680i A1 LeadTek GTX 280 @ 705/1450/1200 4x1GB Super Tallent DDR2(800) 
Hard DriveOptical DriveOSMonitor
Seagate 250gbx2 LG 18X DVD-RW / 300GB WD VelociRaptor Vista x64 Samsung 245BW 
KeyboardPowerCaseMouse
Logitech ThermalTake Toughpower 650w Antec 900 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
My900
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.4 GHz evga nForce 680i A1 LeadTek GTX 280 @ 705/1450/1200 4x1GB Super Tallent DDR2(800) 
Hard DriveOptical DriveOSMonitor
Seagate 250gbx2 LG 18X DVD-RW / 300GB WD VelociRaptor Vista x64 Samsung 245BW 
KeyboardPowerCaseMouse
Logitech ThermalTake Toughpower 650w Antec 900 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
post #9 of 42
I just use a cd and an iso program.

I am willing to bet you haven't OC'ed yet, because that is pretty much the exact same score I got with my stock clocked 6600 and single GTS.
I Love Cheese
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 3.4 Asus P8P67 Basic XFX 5970 2 gig Black Edition 2x 4 gig DDR 1600 G-Skill 
Hard DriveOSMonitorPower
2x500 gig WD Vista Ultimate 64-bit Dual 25" Hannspree LCD CM 750 Watt 
CaseMouse
Rosewill THOR Logitech Trackball 
  hide details  
Reply
I Love Cheese
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 3.4 Asus P8P67 Basic XFX 5970 2 gig Black Edition 2x 4 gig DDR 1600 G-Skill 
Hard DriveOSMonitorPower
2x500 gig WD Vista Ultimate 64-bit Dual 25" Hannspree LCD CM 750 Watt 
CaseMouse
Rosewill THOR Logitech Trackball 
  hide details  
Reply
post #10 of 42
When you install a new CPU, you really need to reformat or else you'll get a host of problems (I see you have some already).
X99 Glory Rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930K @ 4.4GHz Asus Rampage V Extreme MSI Lightning 290X Crucial Ballistix Sport 16GB (4 x 4GB) DDR4-2400 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar NAS 4TB Pioneer BDR-2209 Blu-Ray/DVD/CD Writer Noctua NH-D14 SE2011 Windows 8.1 Pro 
MonitorKeyboardPowerCase
Dell 2407WFP Rev. A02 Ducky Legend Black w/ White Backlit Vortex Caps EVGA SuperNOVA 1000 P2 1000W Phanteks Enthoo Primo White 
MouseMouse PadAudio
Logitech G502 Proteus Core Func. Surface 1030 Asus Xonar Essence STX 
  hide details  
Reply
X99 Glory Rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel 5930K @ 4.4GHz Asus Rampage V Extreme MSI Lightning 290X Crucial Ballistix Sport 16GB (4 x 4GB) DDR4-2400 
Hard DriveOptical DriveCoolingOS
Hitachi Deskstar NAS 4TB Pioneer BDR-2209 Blu-Ray/DVD/CD Writer Noctua NH-D14 SE2011 Windows 8.1 Pro 
MonitorKeyboardPowerCase
Dell 2407WFP Rev. A02 Ducky Legend Black w/ White Backlit Vortex Caps EVGA SuperNOVA 1000 P2 1000W Phanteks Enthoo Primo White 
MouseMouse PadAudio
Logitech G502 Proteus Core Func. Surface 1030 Asus Xonar Essence STX 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Freshly Installed Q6600 g0 .. results.. input needed