ok, thats not the best, but its not the worst. i have 2 that are at 1.35. all that means is that you will need alittle more juice to get a higher o/c. btw, go to the top of the screen, go to the user cp, and type in your specs. this will help out in the future! with your current setup, you should be able to get to 3.2! try following my guide, and set your fsb to 3.2. put you cpu voltage at 1.45v. this is actually going to be like 1.40v after vdroop. after you do this open up coretemp and check your core temps. then open up prime95 and do a small fft stress test, as long as you dont go over 72c your good!
post #11 of 36
3/30/08 at 1:25pm