Overclock.net › Forums › Cooling › Water Cooling › Is something wrong, 2 d5 pumps not enought flow? -- Pump Kicking -- Pics and Video
New Posts  All Forums:Forum Nav:

Is something wrong, 2 d5 pumps not enought flow? -- Pump Kicking -- Pics and Video - Page 3

post #21 of 104
Thread Starter 
Quote:
Originally Posted by ira-k View Post
Made if you can I would only have one pump running on each loop and lay the rad stack down flat, shake it a little to if you can and get all that air out of it....It sounds like you have a lot of air still in your rads...

If your pumps are wired up right thats the only thing I can think of that would change the tone of your pumps, air in the loop...It should bleed faster with just one pump running to...It just takes a little time to get all the air out sometimes....

If you can tilt your case around a little to, that should help get some of the air out to...If you see any hanging on the tubing just tap it with your finger to knock it off....

Ill have to call some friend to help me tilt this thing lol, but ill try to do that then... we can see for fact that I stll have some air in the rads, especially when I turn it off and we can see the air come out again like that pictures show... I hope that this ill fix this pump issue... from all what i have heard over here I never see no buddy with this issue...

=/
lucky me i guess huh?

alrigth thanks once again Ira...
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
post #22 of 104
Quote:
Originally Posted by MadeInBrazil View Post
Ill have to call some friend to help me tilt this thing lol, but ill try to do that then... we can see for fact that I stll have some air in the rads, especially when I turn it off and we can see the air come out again like that pictures show... I hope that this ill fix this pump issue... from all what i have heard over here I never see no buddy with this issue...

=/
lucky me i guess huh?

alrigth thanks once again Ira...
No having air in the loop is common Made...You just have to tilt it around and work it out...Lay the rads all the way flat and that will speed it up, thats where most of the air gets trapped..Get someone on each end and shake it a little..You'll get it going...

And then when you get all the air out and if it still makes noise it might be your connections or something...You might want to go ahead and pull the molex pump tails off and make sure all the pins are making good contact now to.....And just run one pump on each loop till its bleed, it should bleed faster like that...
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
post #23 of 104
FluidXP is really thick. When I switched to distilled water it was an extremely noticeable increase in flow rate.
WC ftw!
(13 items)
 
  
CPUMotherboardGraphicsRAM
C2D E7200 @ 3.51ghz 1.17v Lapped Gigabyte EP35-DS3L, HR-05 on nb Palit 8800gt 8gb G.Skill @ 1000mhz 2.1v 
Hard DriveOptical DriveOSMonitor
2x7200.12 500gb RAID, 2xWD5000AAKS Asus DRW-1814BLT SATA CLFSx64, W7x64 SCEPTRE 22" 1680x1050 
KeyboardPowerCaseMouse
Logitech Media Corsair HX520 Modular Antec P182 Gunmetal Logitech G7 Laser Cordless 
Mouse Pad
none 
  hide details  
Reply
WC ftw!
(13 items)
 
  
CPUMotherboardGraphicsRAM
C2D E7200 @ 3.51ghz 1.17v Lapped Gigabyte EP35-DS3L, HR-05 on nb Palit 8800gt 8gb G.Skill @ 1000mhz 2.1v 
Hard DriveOptical DriveOSMonitor
2x7200.12 500gb RAID, 2xWD5000AAKS Asus DRW-1814BLT SATA CLFSx64, W7x64 SCEPTRE 22" 1680x1050 
KeyboardPowerCaseMouse
Logitech Media Corsair HX520 Modular Antec P182 Gunmetal Logitech G7 Laser Cordless 
Mouse Pad
none 
  hide details  
Reply
post #24 of 104
Thread Starter 
I just checked the molex, they seen fine... i believe it has something to do with the pumps, is not like power failure (i guess), its more like a timed thing, like repeat it self every single time the same thing...

I dont know lol...

ill try doing it...

thanks....
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
post #25 of 104
Thread Starter 
Quote:
Originally Posted by Gauvenator View Post
FluidXP is really thick. When I switched to distilled water it was an extremely noticeable increase in flow rate.
right the blue one is really thick, the green one not so bad... next time ill try to buy some additive and all the need and try to make it instead of fluid xp.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
post #26 of 104
Quote:
Originally Posted by MadeInBrazil View Post
I just checked the molex, they seen fine... i believe it has something to do with the pumps, is not like power failure (i guess), its more like a timed thing, like repeat it self every single time the same thing...

I dont know lol...

ill try doing it...

thanks....
Hopefully its just air....I'd make my own coolant to, that pre-made stuff is just to expensive anyway...If that one loop with the blue in it keeps giving you problems you might want to go ahead and drain it and just try it with some distilled in it and see if that helps any....
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8600 4545Mhz*9 w/1.29V DFI DK P45 XFX 8800 GS D9GKX & D9GMH 
Hard DriveOptical DriveOSPower
2x Seagate 160 Perp. RD-1 2x Asus Vista Premium Corsair HX 620 
Case
Open Bench 
  hide details  
Reply
post #27 of 104
Thread Starter 
the issue with the blue liquid was that i coundnot see any movement, but i guess the pumps are working, but now the issue is with those pumps kicking like that.... =o

"I'd make my own coolant to, that pre-made stuff is just to expensive anyway"

u said it all... =]
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
post #28 of 104
That's wierd. Have you taking a simple multimeter and check your Molex voltage reading. I suppose if voltage was low enough, there could be an issue with that, shouldn't matter being higher though, they are fine up to 24V.

You have to watch the dies and gumming issues too. If you happend to have some wierd reaction that left a bunch of sediment behind, the pump could just be struggling from that build up.

If it's not a smooth and silent operation I would stop it and take it apart, very easy on a D5...doesn't get any easier. Then pull the impeller off and check to make sure the little white ball ceramic bearing is good. If for some reason the bearing was damaged, that's the only way you could really tell.

Then I'd just try a quick pump test outside of the system...you could possibly have an obstruction.

Just seen too many wierd growths and dye residue issues come up over time. If something doesn't sound right, it probably needs some attention, and considering you have two pumps doing the same thing, I'd rule out the pumps are bad...something else must be the cause.
    
CPUMotherboardGraphicsRAM
3930K ASrock X79 Ext7 Evga GTX570 CORSAIR Vengeance 16GB 
Hard DriveOptical DriveOSMonitor
Phoenix SSD+2TB Seagate drives ASUS DVD-RW combo Windows 7 28" Hanns-G HZ281 
KeyboardPowerCaseMouse
MS Natural Corsair TX650 Danger Den Torture Rack Logitech MX518 
Mouse Pad
Desk 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
3930K ASrock X79 Ext7 Evga GTX570 CORSAIR Vengeance 16GB 
Hard DriveOptical DriveOSMonitor
Phoenix SSD+2TB Seagate drives ASUS DVD-RW combo Windows 7 28" Hanns-G HZ281 
KeyboardPowerCaseMouse
MS Natural Corsair TX650 Danger Den Torture Rack Logitech MX518 
Mouse Pad
Desk 
  hide details  
Reply
post #29 of 104
Have you tried to run the pumps with thinnner water? sounds like the fluid is too thick
    
CPUMotherboardGraphicsRAM
AMD Phenom 9950 Black Edition @ 3.0Ghz Gigabyte mATX 785G? HD3200 IGP *Passively cooled* 2x1GB WINTEC Crap, 2x2GB Patriot | DDR2 800 1.9v 
Hard DriveOSMonitorKeyboard
Western Digital AAKS Series 500GB Windows 7 Enterprise x64 Custom Cooked for SPEED Samsung 58" B650 1080p Plasma Logitech DiNovo Mini 
PowerCaseMouse
Silverstone 350Watt Silent PSU Cooler Master 590 Logitech DiNovo Mini 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Phenom 9950 Black Edition @ 3.0Ghz Gigabyte mATX 785G? HD3200 IGP *Passively cooled* 2x1GB WINTEC Crap, 2x2GB Patriot | DDR2 800 1.9v 
Hard DriveOSMonitorKeyboard
Western Digital AAKS Series 500GB Windows 7 Enterprise x64 Custom Cooked for SPEED Samsung 58" B650 1080p Plasma Logitech DiNovo Mini 
PowerCaseMouse
Silverstone 350Watt Silent PSU Cooler Master 590 Logitech DiNovo Mini 
  hide details  
Reply
post #30 of 104
Thread Starter 
ill upload a video on youtube, nd illpost here.... I also lift the rads and turn a little sideway, it came out a lot air from it... now where that picture shows some air is not anymore...

ill post it whenever its done...
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 XFX 680i 2x 8800GTS SC 1x 8600GT For Dual Monitor 4GB Corsair 800Mhz 4-4-4-12 
Hard DriveOptical DriveOSMonitor
500GB Segate - 320 GB Segate 250GB Western Digital Windows XP, Windows Vista 1x HP w2408 2x HP w2207 
KeyboardPowerCaseMouse
Zboard Thermaltake Toughpower 1200w, 700w Cooler Master Stacker 830 Evolution G7 - MX Revolution 
Mouse Pad
Razer ExactMat X - QPad 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Is something wrong, 2 d5 pumps not enought flow? -- Pump Kicking -- Pics and Video