i'm not sure about the (spp) i will have to do some research. but since your o/cing you need to download coretemp and give some temps. you will need to stress test your rig for stability. for this you download prime95 and run the small fft test. give us your idle temps, and your load (prime95 test) temps. that will give us an idea how far you can go.
DDR2 @ 800mhz (400mhz actual) @ 5-5-7-18-3-23-5-9
vFSB = 1.25v
everything else @ default
Prime95 (blend) = 6 hours with no error
Temp @ 2.7ghz (CPU Fan fluctuates between ~30-50% --> 1700 - 2860 RPM)
Idle: 36-40 C
Load: 49-52 C
Also, just to be clear on this, the 'CPU Default Voltage' and 'CPU CORE (VID)' are two different settings correct? The VID only affects the start-up voltage and does not affect performance right? If so, is there a program that would allow me to change the 'CPU Default Voltage'?