Overclock.net › Forums › Cooling › Water Cooling › Liquid Cooling Foam
New Posts  All Forums:Forum Nav:

Liquid Cooling Foam - Page 2

post #11 of 15
Since its been like that for a week I think maybe when you cleaned the tubes (if you used dish soap) you didnt rinse it all out.
Wet Blue Sand
(28 items)
 
 
HTPC 1080p
(21 items)
 
CPUMotherboardGraphicsRAM
i7-4700MQ Intel HM87 GTX 780M 32GB DDR3 1600 
Hard DriveHard DriveCoolingOS
Toshiba 128GB SSD x 3 RAID 0 WD 1TB Single Fan Windows 8.1 x 64 Pro 
MonitorKeyboardPowerAudio
17.3 1920x1980 Steel Series Gaming Backlit 102 keys Brick Dynaudio Tech 
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 5050e Gigabyte 780G MA78GM-US2H ATI Radeon HD 3200 G Skill. 2 x 1 GB @ 1066 
Hard DriveHard DriveOptical DriveCooling
Seagate 120GB Seagate 750GB LG GGC-H20LK BluRay/HD-DVD Stock Cooling 
OSMonitorKeyboardPower
Windows 7 Professional x86 Samsung HL56A650 56in DLP Logitech Mini diNovo COOLMAX CX-400B 
CaseMouseMouse PadAudio
nMEDIAPC HTPC5000B Logitech Mini diNovo Air Onkyo TX-SR707 
AudioAudioAudioAudio
Polk Audio Monitors 70 Polk Audio Monitors 40 Polk Audio CS2 Polk Audio PSW505 
Other
Logitech Harmony One 
  hide details  
Reply
Wet Blue Sand
(28 items)
 
 
HTPC 1080p
(21 items)
 
CPUMotherboardGraphicsRAM
i7-4700MQ Intel HM87 GTX 780M 32GB DDR3 1600 
Hard DriveHard DriveCoolingOS
Toshiba 128GB SSD x 3 RAID 0 WD 1TB Single Fan Windows 8.1 x 64 Pro 
MonitorKeyboardPowerAudio
17.3 1920x1980 Steel Series Gaming Backlit 102 keys Brick Dynaudio Tech 
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 5050e Gigabyte 780G MA78GM-US2H ATI Radeon HD 3200 G Skill. 2 x 1 GB @ 1066 
Hard DriveHard DriveOptical DriveCooling
Seagate 120GB Seagate 750GB LG GGC-H20LK BluRay/HD-DVD Stock Cooling 
OSMonitorKeyboardPower
Windows 7 Professional x86 Samsung HL56A650 56in DLP Logitech Mini diNovo COOLMAX CX-400B 
CaseMouseMouse PadAudio
nMEDIAPC HTPC5000B Logitech Mini diNovo Air Onkyo TX-SR707 
AudioAudioAudioAudio
Polk Audio Monitors 70 Polk Audio Monitors 40 Polk Audio CS2 Polk Audio PSW505 
Other
Logitech Harmony One 
  hide details  
Reply
post #12 of 15
here is what you do leave teh cap off of the res until its gone works 100%
    
CPUMotherboardGraphicsRAM
Q6600 G0 2.4 LAPPED 1.16 VID DFI UT x48 T2R VisionTek 4870x2 8GB GskiLL PC-8500 1066mhz 
Hard DriveOptical DriveOSMonitor
250 GB 250 GB Vista x64 "Complete Driver Sign Disabled" no F8 Asus 24' 2ms 1080p 
KeyboardPowerCaseMouse
Razer Lycosa Antec 850 Signature Lian Li V2000II B G5 Logitech 
Mouse Pad
Laser 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Q6600 G0 2.4 LAPPED 1.16 VID DFI UT x48 T2R VisionTek 4870x2 8GB GskiLL PC-8500 1066mhz 
Hard DriveOptical DriveOSMonitor
250 GB 250 GB Vista x64 "Complete Driver Sign Disabled" no F8 Asus 24' 2ms 1080p 
KeyboardPowerCaseMouse
Razer Lycosa Antec 850 Signature Lian Li V2000II B G5 Logitech 
Mouse Pad
Laser 
  hide details  
Reply
post #13 of 15
There is a large pocket of air in your system...either left there in installation or from a leak. This worked for me:
  1. Turn the system off.
  2. Double check all house connections for a secure leak-free connection...both the barb to the component and the hose to the barb.
  3. If the components are unmounted, rotate the components, otherwise, rotate the system, looking for bubbles in the coolant lines.
  4. Maneuver the air bubbles to the reservoir or top of the T-line.
  5. Open the top of the T-line or reservoir to bleed the air.
  6. Continue until no air is apparent anywhere in the system.
If the components are unmounted and the fillport/reservoir top are the highest point in the system, the cover can be left off.

If the radiator does not have a bleed at its highest point, you will probably need to remove it work the air out.

Keep the coolant level above the highest component while bleeding...or the air will just return to that component.

Then turn the power on the to circuit by removing and jumping the 24 pin connector. keep the fillport or reservoir top at the highest point in the system uncovered. Remaining foam should gravitate to the highest point/lowest pressure point in the system.

I found huge air bubbles. After working them out, the fluid appeared clear. After starting the pump, it turned milky with foam, after another hour it was clear again.
Number 1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 B3 EVGA 780i A1 MSI GTX260/192 2x2GB Corsair Dominator PC1066 
Hard DriveOptical DriveOSMonitor
1x500GB Maxtor 1 Asus SATA Vista x64 Ultimate 32" 1080P TV 
KeyboardPowerCaseMouse
Logitech Wave USB 1000w Cooler Master Lian Li V2000 Ideazon Reaper Edge 
Mouse Pad
QPad QT-R 
  hide details  
Reply
Number 1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 B3 EVGA 780i A1 MSI GTX260/192 2x2GB Corsair Dominator PC1066 
Hard DriveOptical DriveOSMonitor
1x500GB Maxtor 1 Asus SATA Vista x64 Ultimate 32" 1080P TV 
KeyboardPowerCaseMouse
Logitech Wave USB 1000w Cooler Master Lian Li V2000 Ideazon Reaper Edge 
Mouse Pad
QPad QT-R 
  hide details  
Reply
post #14 of 15
Thread Starter 
I'll try doing all the suggestions. ThePope, my temps are 30ish idle and mid-50s with Folding. Temps are kinda high because of my 1.53 vCore.
Vapor
(19 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-2500K ASUS P8P67 Pro PNY GeForce GTX 470 G.SKILL Ripjaws X 4GB DDR3-1600 
Hard DriveHard DriveCoolingCooling
Samsung 840 Series Western Digital Caviar Green 1TB (Advanced Format) Swiftech Apogee XT Swiftech MCW80 
CoolingCoolingCoolingOS
XSPC D5 Dual Reservoir Magicool Extreme Dual 120mm Radiator Phobya Xtreme 200mm Radiator Microsoft Windows 8 Pro 
MonitorKeyboardPowerCase
Dell G2410 Logitech K520 OCZ ModXStream Pro 600w Corsair 600T SE 
MouseAudio
Logitech M310 Brainwavz HM3 
  hide details  
Reply
Vapor
(19 items)
 
  
CPUMotherboardGraphicsRAM
Core i5-2500K ASUS P8P67 Pro PNY GeForce GTX 470 G.SKILL Ripjaws X 4GB DDR3-1600 
Hard DriveHard DriveCoolingCooling
Samsung 840 Series Western Digital Caviar Green 1TB (Advanced Format) Swiftech Apogee XT Swiftech MCW80 
CoolingCoolingCoolingOS
XSPC D5 Dual Reservoir Magicool Extreme Dual 120mm Radiator Phobya Xtreme 200mm Radiator Microsoft Windows 8 Pro 
MonitorKeyboardPowerCase
Dell G2410 Logitech K520 OCZ ModXStream Pro 600w Corsair 600T SE 
MouseAudio
Logitech M310 Brainwavz HM3 
  hide details  
Reply
post #15 of 15
Hello.i am having the same problem.In the first 24 hr of leaking test no problems at all.I fire up the system and it make the foam.First time no problem.A add a second radiator from the same producer EK and the same coolent.Any advice pls.I hare that foam.My temp is around 24 cpu and 24 Gpu in normal use.In high ise around 35-38 cpu and 36 Gpu.Thank you
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Liquid Cooling Foam