Overclock.net › Forums › Intel › Intel CPUs › Need help OCing E4500
New Posts  All Forums:Forum Nav:

Need help OCing E4500 - Page 2

post #11 of 43
1.325v a little high.. but don't worry about it for now. First of all set the following in your bios, they may not be worded the exact same, but are usually worded pretty closely to each other.

PCI Freq: 100Mhz
PECI (if its listed, some board don't list it): Enabled
C1E: Disabled
EIST (Speedstep): Disabled
TM1 and/or 2 (Thermal monitor): Enabled
Northbridge (MCH) Volts: Stock setting or lowest voltage
Southbridge (ICH) Volts: Stock setting or lowest voltage
PCI-E Volts: Stock setting or lowest voltage
CPU Vcore: 1.325v ~ 1.35v (start at stock 1.325v first)
RAM Volts: 2.2v or +0.4v
RAM Timings: 5-5-5-12 (set timings to this for now, once stableized reduce to stock 4-4-4-12)
FSB:RAM Ratio (or memory multiplier): 1:1 or +2.0 (however your board lists it)
Performance Enhance (or any kind of Turbo mode): Disabled or set to stock
CPU Multiplier: 11x
FSB: 273Mhz or 1092Mhz if your board wants you to input the quad pumped FSB

What I said above will give you 3Ghz with loose RAM timings and a 1:1 ratio, the FSB is only 273Mhz so even the cheapo ECS boards should be able to pull this off. Set everything in your bios as accurately as you can to what I mentioned above and report back if it posted.
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
post #12 of 43
Thread Starter 
used the settings you posted gigabyte, it posted fine. except it says my dram frequency is 794mhz, with a the cpu at 3.0GHZ flat, and the fsb at 1092. (quad pumped)
post #13 of 43
Quote:
Originally Posted by remedy View Post
used the settings you posted gigabyte, it posted fine. except it says my dram frequency is 794mhz, with a the cpu at 3.0GHZ flat, and the fsb at 1092. (quad pumped)
Thats good it posted, do a small test with small FFT for at least 30 mins to show its at least semi stable if you don't want to spend too much time, or if you want to let it go for a few hours is up to you. Your RAM is running at 794Mhz because its not in 1:1 with the FSB, if it was it would be at 546Mhz but thats ok. If it posted leave it as that, we have already made progress as you stated you coulden't get 3Ghz.

Now just set your RAM timings back to stock which is 4-4-4-12 and it should still post hopefully. If 3Ghz is stable and you want more speed try 3.1Ghz at the same vcore, 3.1Ghz is 11x CPU multi and 282Mhz FSB (or 1128Mhz if your board takes quad pumped FSB speeds only).
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
post #14 of 43
Thread Starter 
yep posted at 4-4-4-12. ran for 30 mins stable at 3.0 5-5-5-12 @ 1092fsb.

gonna try to see how far i can push this, any advice on where i should go voltage / fsb wise now to maintain a 1:1 cpu:ram ratio ?
post #15 of 43
Look for something along the lines of system memory multiplier, RAM ratio, RAM multiplier, CPU:RAM or FSB:RAM. To set 1:1 the setting will have to be 1:1 or +2.0 as I have never seen a board that had it worded as something else. Or simply leave it for now as it seems to be happy at it's current setting.

If you want to try 3.1Ghz or more keep the CPU multi at 11x for now and raise the FSB bit by bit untill you reach the speed you desire or become unstable. 1128 FSB will give you 3.1Ghz, 1164 FSB for 3.2Ghz and 1200 FSB for 3.3Ghz. Toy around with those FSB speeds untill satisified.
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
post #16 of 43
Thread Starter 
theres a picture of my boards bios, mind looking at that and telling me which one is the ram divider? since i dont see it.

since i dont have the option in my bios to set the ram divider, what fsb would give me a 1:1 ratio with my ram @ ddr2 800?
post #17 of 43
Set system clock mode to Enabled, and you should see Memory clock. In that field type 546Mhz for 1:1 with 1092 FSB as I believe your board, by the screenshot will only take in memory speed in it's double pumped state.
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
post #18 of 43
Thread Starter 
the thing is though, system clock mode only has the options: auto, linked (you can only change the cpu freq), and manual ( you can change both the cpu and ram frequencies).

i appreciate the patience and help man.
post #19 of 43
Set it to linked and tell me if it auto sets a RAM speed, or if it gives you a selection of preset RAM speeds which are called dividers.
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
Core i7 6700k @ 4.5 GHz Asus Sabertooth Z170 S ZOTAC GTX 1070 AMP! 8GB G.SKILL Ripjaws V 16GB DDR4 2400 @ 2800 
Hard DriveHard DriveHard DriveHard Drive
Samsung SM951 256GB NVMe Samsung 850 EVO 1TB Toshiba 2TB 7.2K RPM Silicon Power S60 120GB 
CoolingOSMonitorKeyboard
Noctua NH-D15S Windows 10 Pro x64 Acer G257HU Logitech G910 
PowerCaseMouseMouse Pad
EVGA SuperNOVA 750W G2 Cooler Master HAF XB EVO Steelseries Rival Some cheap generic crap 
AudioAudio
Asus Xonar DGX Kingston HyperX Cloud Revolver 
CPUMotherboardGraphicsRAM
Core i7 4710MQ Eurocom X3 R2/Clevo P157SM-A GeForce GTX 965M 4GB @ 1178/1353 MHz 16GB DDR3L 1866 @ 2133 11-11-11-31-2T 
Hard DriveHard DriveCoolingOS
[SSD] Mushkin ECO2 240GB [HDD] HGST 1TB 7.2K RPM SATA III Stock Windows 10 Pro x64 
MonitorKeyboardPowerCase
15.6" 1080P LCD Stock Stock 180W Stock 
MouseAudio
Touchpad/Microsoft Optical Mouse Sound Blaster X-Fi MB3 
  hide details  
Reply
post #20 of 43
Thread Starter 
it auto sets a ram speed.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need help OCing E4500