post #1 of 1
Thread Starter 
Hi everyone
My bros computer has this cooler on and I think the air flow is incorrect
the cpu is running at about 53c to 63c and thats at idle.
The fins were blocked a bit when I first inspected it so I hoovered them clean.
The air is currently being drawn into the cooler fins across the fan and into the case. As I look at the assembly I can see the fan power cables on the outside this is not the way the the fan is shown on all the photos of the unit on the web.
It will be a little difficult to reverse in situ but I am sure it will be better pushing air into the cooler matrix.
If you have one of these fitted leave some info please
cheers
P.S. the cooler matrix is vertical close to the back of the computer
and you can see the writing in the centre unlike the one shown here ( see Link)

http://www.akasa.co.uk/akasa_english...pec_ak_920.htm