Overclock.net › Forums › Intel › Intel CPUs › >> Q9300 Club <<
New Posts  All Forums:Forum Nav:

>> Q9300 Club << - Page 53

post #521 of 810
Quote:
DO you have the memory and FSB unlinked?

Also I have the same Mem as you make sure it's set to 5-5-5-15-2T and manualy put it at 2.1v. and FSB to 1.2v
Yes I have everything you have. I went to 1.4 volts on vcore and tried ..Didn't work. However looking at your BIOS I see you have 7.5x multiplier? ? I can only use 6-7 multiplier Do you know how to set it as 7.5 ?
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
post #522 of 810
Quote:
Originally Posted by GardenPest View Post
Yes I have everything you have. I went to 1.4 volts on vcore and tried ..Didn't work. However looking at your BIOS I see you have 7.5x multiplier? ? I can only use 6-7 multiplier Do you know how to set it as 7.5 ?
Right it wasn't booting at 3.0ghz because i was using 7.0x CPU Multiplier and an FSB of 1715 (Bus 429), obviously was too high. I went through each setting to make sure I wasn't missing something... I was The CPU N/2 ratio was disabled...I enabled it ,managed to get 7.5x multi and an FSB of 1600 with " 3.0ghz and at 1.30 vCore"...Success!! Thanks Tek for the help man
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
post #523 of 810
Quote:
Originally Posted by GardenPest View Post
Right it wasn't booting at 3.0ghz because i was using 7.0x CPU Multiplier and an FSB of 1715 (Bus 429), obviously was too high. I went through each setting to make sure I wasn't missing something... I was The CPU N/2 ratio was disabled...I enabled it ,managed to get 7.5x multi and an FSB of 1600 with " 3.0ghz and at 1.30 vCore"...Success!! Thanks Tek for the help man
Sweet work, what is your VCore at not that is is stable?

EDIT.

NM is see it 1.3v if you don't mind telling me what is your VID you can find that with CPU-z or CoreTemp.
Remnant v2
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.0Ghz 1.3v EVGA 780i (P10) EVGA GTX 465FTW 4x1GB Corsair Dominator DDR2-8500 (5-5-5-15 :1067) 
Hard DriveOptical DriveOSMonitor
2x 500GB WD Black RAID+0 Samsung DVD-R SATA Win7 x64 Ultimate // Ubuntu 8.10 x64 Dell 2005FPW LCD 
KeyboardPowerCaseMouse
MS ABS MAJESTY 1100W Cooler Master COSMOS 1000 MS 
Mouse Pad
Belkin 
  hide details  
Reply
Remnant v2
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.0Ghz 1.3v EVGA 780i (P10) EVGA GTX 465FTW 4x1GB Corsair Dominator DDR2-8500 (5-5-5-15 :1067) 
Hard DriveOptical DriveOSMonitor
2x 500GB WD Black RAID+0 Samsung DVD-R SATA Win7 x64 Ultimate // Ubuntu 8.10 x64 Dell 2005FPW LCD 
KeyboardPowerCaseMouse
MS ABS MAJESTY 1100W Cooler Master COSMOS 1000 MS 
Mouse Pad
Belkin 
  hide details  
Reply
post #524 of 810
My vid is 1.2375... I ran CPU stability test and after 15 mins I got an error Also left 4 dead crashed my comp last night and I got a blue screen vista error -_- I'm back at 2.9 Again... Do you think it could be a voltage problem. Might try the pencil mod for the 750i ftw, gives accurate voltage I beleive. I have a really good cooler and the cpu runs at 44 degrees celsius maximum under load and 29-31 when it's not. I'm not too sure why it isn't stable.

Edited by GardenPest - 3/5/09 at 8:18am
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
post #525 of 810
Quote:
Originally Posted by GardenPest View Post
My vid is 1.2375... I ran CPU stability test and after 15 mins I got an error Also left 4 dead crashed my comp last night and I got a blue screen vista error -_- I'm back at 2.9 Again... Do you think it could be a voltage problem. Might try the pencil mod for the 750i ftw, gives accurate voltage I beleive. I have a really good cooler and the cpu runs at 44 degrees celsius maximum under load and 29-31 when it's not. I'm not too sure why it isn't stable.
Alright I upped the voltage to 3.75 ,messed around with advanced ram timings setting most to auto and brought it back up to 3.0ghz... Ran the test for 30 mins and it was perfect... Seems good I reckon it was the voltage. I'm going to run the stability test overnight and i'll tell ya how it goes
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
post #526 of 810
what speed does the q9300 run at?
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #527 of 810
^2.5ghz stock

can any of you experts have a look here please
thanks
Mine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @3.0Ghz Lapped with Blood DFI BloodIron P35-T2RL MSI 9850 Twin Frozr 4Gb Geil DDR2 @960Mhz 
Hard DriveOptical DriveOSMonitor
64Gb SSD, 2.5Tb Mechanical 20x Lite-on DVD-RW Win 7 Pro x64 22" 16:10 LCD @ 1680x1050 
KeyboardPowerCaseMouse
MS Comfort Curve Coolermaster 700W Real Power Thermaltake Soprano MX518 
Mouse Pad
CM Storm 
  hide details  
Reply
Mine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @3.0Ghz Lapped with Blood DFI BloodIron P35-T2RL MSI 9850 Twin Frozr 4Gb Geil DDR2 @960Mhz 
Hard DriveOptical DriveOSMonitor
64Gb SSD, 2.5Tb Mechanical 20x Lite-on DVD-RW Win 7 Pro x64 22" 16:10 LCD @ 1680x1050 
KeyboardPowerCaseMouse
MS Comfort Curve Coolermaster 700W Real Power Thermaltake Soprano MX518 
Mouse Pad
CM Storm 
  hide details  
Reply
post #528 of 810
Quote:
Originally Posted by GardenPest View Post
Alright I upped the voltage to 3.75 ,messed around with advanced ram timings setting most to auto and brought it back up to 3.0ghz... Ran the test for 30 mins and it was perfect... Seems good I reckon it was the voltage. I'm going to run the stability test overnight and i'll tell ya how it goes
Yeah you have a high VID, suck for you, so you will need more voltage to keep the CPU stable while OCed.
Remnant v2
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.0Ghz 1.3v EVGA 780i (P10) EVGA GTX 465FTW 4x1GB Corsair Dominator DDR2-8500 (5-5-5-15 :1067) 
Hard DriveOptical DriveOSMonitor
2x 500GB WD Black RAID+0 Samsung DVD-R SATA Win7 x64 Ultimate // Ubuntu 8.10 x64 Dell 2005FPW LCD 
KeyboardPowerCaseMouse
MS ABS MAJESTY 1100W Cooler Master COSMOS 1000 MS 
Mouse Pad
Belkin 
  hide details  
Reply
Remnant v2
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.0Ghz 1.3v EVGA 780i (P10) EVGA GTX 465FTW 4x1GB Corsair Dominator DDR2-8500 (5-5-5-15 :1067) 
Hard DriveOptical DriveOSMonitor
2x 500GB WD Black RAID+0 Samsung DVD-R SATA Win7 x64 Ultimate // Ubuntu 8.10 x64 Dell 2005FPW LCD 
KeyboardPowerCaseMouse
MS ABS MAJESTY 1100W Cooler Master COSMOS 1000 MS 
Mouse Pad
Belkin 
  hide details  
Reply
post #529 of 810
Yeah thats a bit bent, but I don't mind tbh. I got to 3Ghz and thats all that really matters to me
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
Pest's Compula
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 960 Asus P6X58D-E PNY Geforce GTX 670 HyperX Beast 8 GB 1866 MHz CL10 DDR3 KHX18C9T3K... 
Optical DriveOSMonitorMonitor
DVD-RW Windows 7 Ultimate 64-bit Philips HDTV 1920x1080 32PFL3605H Dell 1908FP 
KeyboardPowerCaseMouse
Razer Blackwidow Ultimate Zalman ZM1000 Ultra quiet PSU (1KW) Antec Twelve Hundred Razer Death Adder 2013 
Mouse PadAudio
Anker Realtek Onboard 
  hide details  
Reply
post #530 of 810
Yeah, 3.0Ghz is bangin.
Remnant v2
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.0Ghz 1.3v EVGA 780i (P10) EVGA GTX 465FTW 4x1GB Corsair Dominator DDR2-8500 (5-5-5-15 :1067) 
Hard DriveOptical DriveOSMonitor
2x 500GB WD Black RAID+0 Samsung DVD-R SATA Win7 x64 Ultimate // Ubuntu 8.10 x64 Dell 2005FPW LCD 
KeyboardPowerCaseMouse
MS ABS MAJESTY 1100W Cooler Master COSMOS 1000 MS 
Mouse Pad
Belkin 
  hide details  
Reply
Remnant v2
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.0Ghz 1.3v EVGA 780i (P10) EVGA GTX 465FTW 4x1GB Corsair Dominator DDR2-8500 (5-5-5-15 :1067) 
Hard DriveOptical DriveOSMonitor
2x 500GB WD Black RAID+0 Samsung DVD-R SATA Win7 x64 Ultimate // Ubuntu 8.10 x64 Dell 2005FPW LCD 
KeyboardPowerCaseMouse
MS ABS MAJESTY 1100W Cooler Master COSMOS 1000 MS 
Mouse Pad
Belkin 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › >> Q9300 Club <<