Overclock.net › Forums › Intel › Intel CPUs › >> Q9300 Club <<
New Posts  All Forums:Forum Nav:

>> Q9300 Club << - Page 69

post #681 of 810
http://www.overclock.net/intel-mothe...-ep45-ud3.html

This thread will answer most of your questions. BTW, your cpu voltage is low for 3.0 (which is good). I have to increase mines to 1.231v to reach the same speed. I'm currently running 3.5 at 1.344v. You have the potential to reach a higher clock without going over the recommend voltage.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.6GHz 480FSB GA EP45-UD3P HD 6950 SOLD! Rokn 8800GT Patriot Viper DDR2 
Hard DriveOSMonitorPower
2x500 Raid0 -250 OSX Dual Window7/Snow Leopard LG 32LD350 HDTV/Samsung T240 1920x1200 Cooler Master 550W 
CaseMouseMouse Pad
Antec 900 Modded MX518 QCK+ Steel 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.6GHz 480FSB GA EP45-UD3P HD 6950 SOLD! Rokn 8800GT Patriot Viper DDR2 
Hard DriveOSMonitorPower
2x500 Raid0 -250 OSX Dual Window7/Snow Leopard LG 32LD350 HDTV/Samsung T240 1920x1200 Cooler Master 550W 
CaseMouseMouse Pad
Antec 900 Modded MX518 QCK+ Steel 
  hide details  
Reply
post #682 of 810
Thread Starter 
Spreadsheet updated let me know if I missed anyone.
post #683 of 810
setup

q9300
gskill pc3 10666 1333 mhz 9 9 9 24
cooler master hyper nt520
intel dp45sg
ati 4870 512 sappire

so far i am clocked at 2.8ghz i wanna reach a nice 3ghz but i keep falling on my face if anyone can help me adjust to get to 3ghz that would be be great also did a prime95 for 4 hours not a whine from it
post #684 of 810
Increase you CPU Vcore by one notch ONLY. Some people didn't have to increase anything except for the fsb and they were stable at 3.0GHz.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.6GHz 480FSB GA EP45-UD3P HD 6950 SOLD! Rokn 8800GT Patriot Viper DDR2 
Hard DriveOSMonitorPower
2x500 Raid0 -250 OSX Dual Window7/Snow Leopard LG 32LD350 HDTV/Samsung T240 1920x1200 Cooler Master 550W 
CaseMouseMouse Pad
Antec 900 Modded MX518 QCK+ Steel 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.6GHz 480FSB GA EP45-UD3P HD 6950 SOLD! Rokn 8800GT Patriot Viper DDR2 
Hard DriveOSMonitorPower
2x500 Raid0 -250 OSX Dual Window7/Snow Leopard LG 32LD350 HDTV/Samsung T240 1920x1200 Cooler Master 550W 
CaseMouseMouse Pad
Antec 900 Modded MX518 QCK+ Steel 
  hide details  
Reply
post #685 of 810
well you dont think being my ram is at 1333? and this mobo being a pain in the a%^
post #686 of 810
Adjust your MCH frequency latch and system memory multiplier for your ram if available in bios . Good luck.
Edited by DaRookie - 11/23/10 at 8:49pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.6GHz 480FSB GA EP45-UD3P HD 6950 SOLD! Rokn 8800GT Patriot Viper DDR2 
Hard DriveOSMonitorPower
2x500 Raid0 -250 OSX Dual Window7/Snow Leopard LG 32LD350 HDTV/Samsung T240 1920x1200 Cooler Master 550W 
CaseMouseMouse Pad
Antec 900 Modded MX518 QCK+ Steel 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.6GHz 480FSB GA EP45-UD3P HD 6950 SOLD! Rokn 8800GT Patriot Viper DDR2 
Hard DriveOSMonitorPower
2x500 Raid0 -250 OSX Dual Window7/Snow Leopard LG 32LD350 HDTV/Samsung T240 1920x1200 Cooler Master 550W 
CaseMouseMouse Pad
Antec 900 Modded MX518 QCK+ Steel 
  hide details  
Reply
post #687 of 810
http://valid.canardpc.com/show_oc.php?id=1508083

any way I can get higher than this? my voltage is still low.
DEAFMUTES
(22 items)
 
   
CPUMotherboardGraphicsRAM
I7 3930k @ 5ghz (VID1.3561) Gigabyte Assassin 2 GTX 680 FTW + 4gb Corsair Dominator Platinum (1866 @ 1.5v) 
Hard DriveHard DriveCoolingCooling
Sasmung 840 Pro Seagate MCP-655 pump Tygon UltraFlexLRT tubing 
CoolingCoolingCoolingCooling
Monsoon dual bay res (v2)  EK Supremacy CSQ CPU + GFX block  1x 360 XSPC radiator 1x 240 XSPC radiator 10 CoolerMaster scythes (green LEDs) 
MonitorMonitorMonitorKeyboard
27" Yamakasi Catleap 2560x1440 (120hz) 23.5" Acer GD235Hz (120HZ)  24.3" Acer B243W (Portrait) Leopold Tenkeyless (MX Cherry Blues, Red o-ring... 
PowerCaseMouseMouse Pad
Corsair 850w NZXT Switch 810 SteelSeries Sensei SteelSeries SP 
AudioOther
Creative X-Fi Ti HD -> Pro-Ject Head Box II -> ... Roccat Apuri Mouse Bungee 
CPUMotherboardGraphicsRAM
Yorkfield Q9300 @ 3.45ghz (VID 1.21) Asus P5Q Pro Turbo EVGA GTX 470 870/1740/2100 (VID 1.04) 8GB Kingston DDR2 PC-6400 
Hard DriveOptical DriveOSMonitor
2x 150gb raptors (RAID 0) 4x 1TB Seagates ASUS DRW-2014L1T Windows 7 23.5" Acer GD235Hz 120HZ + 24.3" Acer B243W 
KeyboardPowerCaseMouse
Filco Majestouch Tenkeyless (MX Blues) Enermax 620w Lian Li PC-80 IntelliMouse Explorer 3.0 
Mouse Pad
SteelSeries SP 
  hide details  
Reply
DEAFMUTES
(22 items)
 
   
CPUMotherboardGraphicsRAM
I7 3930k @ 5ghz (VID1.3561) Gigabyte Assassin 2 GTX 680 FTW + 4gb Corsair Dominator Platinum (1866 @ 1.5v) 
Hard DriveHard DriveCoolingCooling
Sasmung 840 Pro Seagate MCP-655 pump Tygon UltraFlexLRT tubing 
CoolingCoolingCoolingCooling
Monsoon dual bay res (v2)  EK Supremacy CSQ CPU + GFX block  1x 360 XSPC radiator 1x 240 XSPC radiator 10 CoolerMaster scythes (green LEDs) 
MonitorMonitorMonitorKeyboard
27" Yamakasi Catleap 2560x1440 (120hz) 23.5" Acer GD235Hz (120HZ)  24.3" Acer B243W (Portrait) Leopold Tenkeyless (MX Cherry Blues, Red o-ring... 
PowerCaseMouseMouse Pad
Corsair 850w NZXT Switch 810 SteelSeries Sensei SteelSeries SP 
AudioOther
Creative X-Fi Ti HD -> Pro-Ject Head Box II -> ... Roccat Apuri Mouse Bungee 
CPUMotherboardGraphicsRAM
Yorkfield Q9300 @ 3.45ghz (VID 1.21) Asus P5Q Pro Turbo EVGA GTX 470 870/1740/2100 (VID 1.04) 8GB Kingston DDR2 PC-6400 
Hard DriveOptical DriveOSMonitor
2x 150gb raptors (RAID 0) 4x 1TB Seagates ASUS DRW-2014L1T Windows 7 23.5" Acer GD235Hz 120HZ + 24.3" Acer B243W 
KeyboardPowerCaseMouse
Filco Majestouch Tenkeyless (MX Blues) Enermax 620w Lian Li PC-80 IntelliMouse Explorer 3.0 
Mouse Pad
SteelSeries SP 
  hide details  
Reply
post #688 of 810
Yes, your voltage is low for a 9300 and I encourage you to push it more. Try to get 3.5ghz which should be relatively easy for you. 3.6 is the breaking point for a q9300 and most people, not all, will need to increase their voltage over what's recommended by Intel (1.362v). Your CPU on the other hand might be able to reach 3.6+ with low voltage or close to recommended volts. Keep at it and good luck
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.6GHz 480FSB GA EP45-UD3P HD 6950 SOLD! Rokn 8800GT Patriot Viper DDR2 
Hard DriveOSMonitorPower
2x500 Raid0 -250 OSX Dual Window7/Snow Leopard LG 32LD350 HDTV/Samsung T240 1920x1200 Cooler Master 550W 
CaseMouseMouse Pad
Antec 900 Modded MX518 QCK+ Steel 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9300 @ 3.6GHz 480FSB GA EP45-UD3P HD 6950 SOLD! Rokn 8800GT Patriot Viper DDR2 
Hard DriveOSMonitorPower
2x500 Raid0 -250 OSX Dual Window7/Snow Leopard LG 32LD350 HDTV/Samsung T240 1920x1200 Cooler Master 550W 
CaseMouseMouse Pad
Antec 900 Modded MX518 QCK+ Steel 
  hide details  
Reply
post #689 of 810
Thanks Rookie, I will try it out, Currently I am at 453 and super stable. I will try and push it some more tonight - focusing currently on setting up my receiver and whatnot.
DEAFMUTES
(22 items)
 
   
CPUMotherboardGraphicsRAM
I7 3930k @ 5ghz (VID1.3561) Gigabyte Assassin 2 GTX 680 FTW + 4gb Corsair Dominator Platinum (1866 @ 1.5v) 
Hard DriveHard DriveCoolingCooling
Sasmung 840 Pro Seagate MCP-655 pump Tygon UltraFlexLRT tubing 
CoolingCoolingCoolingCooling
Monsoon dual bay res (v2)  EK Supremacy CSQ CPU + GFX block  1x 360 XSPC radiator 1x 240 XSPC radiator 10 CoolerMaster scythes (green LEDs) 
MonitorMonitorMonitorKeyboard
27" Yamakasi Catleap 2560x1440 (120hz) 23.5" Acer GD235Hz (120HZ)  24.3" Acer B243W (Portrait) Leopold Tenkeyless (MX Cherry Blues, Red o-ring... 
PowerCaseMouseMouse Pad
Corsair 850w NZXT Switch 810 SteelSeries Sensei SteelSeries SP 
AudioOther
Creative X-Fi Ti HD -> Pro-Ject Head Box II -> ... Roccat Apuri Mouse Bungee 
CPUMotherboardGraphicsRAM
Yorkfield Q9300 @ 3.45ghz (VID 1.21) Asus P5Q Pro Turbo EVGA GTX 470 870/1740/2100 (VID 1.04) 8GB Kingston DDR2 PC-6400 
Hard DriveOptical DriveOSMonitor
2x 150gb raptors (RAID 0) 4x 1TB Seagates ASUS DRW-2014L1T Windows 7 23.5" Acer GD235Hz 120HZ + 24.3" Acer B243W 
KeyboardPowerCaseMouse
Filco Majestouch Tenkeyless (MX Blues) Enermax 620w Lian Li PC-80 IntelliMouse Explorer 3.0 
Mouse Pad
SteelSeries SP 
  hide details  
Reply
DEAFMUTES
(22 items)
 
   
CPUMotherboardGraphicsRAM
I7 3930k @ 5ghz (VID1.3561) Gigabyte Assassin 2 GTX 680 FTW + 4gb Corsair Dominator Platinum (1866 @ 1.5v) 
Hard DriveHard DriveCoolingCooling
Sasmung 840 Pro Seagate MCP-655 pump Tygon UltraFlexLRT tubing 
CoolingCoolingCoolingCooling
Monsoon dual bay res (v2)  EK Supremacy CSQ CPU + GFX block  1x 360 XSPC radiator 1x 240 XSPC radiator 10 CoolerMaster scythes (green LEDs) 
MonitorMonitorMonitorKeyboard
27" Yamakasi Catleap 2560x1440 (120hz) 23.5" Acer GD235Hz (120HZ)  24.3" Acer B243W (Portrait) Leopold Tenkeyless (MX Cherry Blues, Red o-ring... 
PowerCaseMouseMouse Pad
Corsair 850w NZXT Switch 810 SteelSeries Sensei SteelSeries SP 
AudioOther
Creative X-Fi Ti HD -> Pro-Ject Head Box II -> ... Roccat Apuri Mouse Bungee 
CPUMotherboardGraphicsRAM
Yorkfield Q9300 @ 3.45ghz (VID 1.21) Asus P5Q Pro Turbo EVGA GTX 470 870/1740/2100 (VID 1.04) 8GB Kingston DDR2 PC-6400 
Hard DriveOptical DriveOSMonitor
2x 150gb raptors (RAID 0) 4x 1TB Seagates ASUS DRW-2014L1T Windows 7 23.5" Acer GD235Hz 120HZ + 24.3" Acer B243W 
KeyboardPowerCaseMouse
Filco Majestouch Tenkeyless (MX Blues) Enermax 620w Lian Li PC-80 IntelliMouse Explorer 3.0 
Mouse Pad
SteelSeries SP 
  hide details  
Reply
post #690 of 810
@ ramenbuoy


For 500MHz FSB try these settings:
PCIE=101
STRAP=333
FSB=500
DRAM=1000
TIMINGS= up the specs for MANUAL or set @ AUTO
DRAM STATIC READ CONTROL=DISABLE
DRAM READ TRAINING=DISABLE
MEM OC CHARGER=ENABLE
AI Clock Twister=AUTO
AI TRANS BOOSTER=MANUAL
Performance LEVEL=10

Vcore=as you need for 3.75GHz
CPU GTL= 0.61x
PLL=1.60
FSB= 1.38
vDRAM=as you need for 1000MHz
vNB=1.44 - 1.50V
vSB=1.20V
vPCIE/SATA = 1.60
LLC= enabled
PCIE & CPU Spectrum = DISABLE
NB & CPU SKEW = AUTO
PERFORMANCE MODE

First try these with multi @ 6 to see if it boots and stable(doesn't crash) and then upp CPU MULTI to 7.5x and find enough Vcore for 3.75GHz..

NOTE-1: Maximum FSB with P5Q & C2Q is around 510MHz (vNB=1.50V+)..

NOTE-2: This is NOT (and it will never be 24/7) STABLE so it's just for validation purposes only..

NOTE-3: With C2Q Maximum P95 LARGE FFT 6 - 12h STABLE FSB IS ~460MHz ON P5Q PRO/PRO TURBO BOARDS, AFTER THAT POINT IT'S ALMOST IMPOSSIBLE TO STABILIZE THE CORE(S) THAT ERROR(S)..

If you run P95 LARGE FFT or BLEND it will produce errors very quickly..(NOT POSIBLE TO STABILIZE DUE LACK OF ADVANCE CPU GTL VOLTAGE OPTIONS IN BIOS..)

CHEERS..
Edited by KingT - 11/29/10 at 3:03pm
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
     
CPUMotherboardGraphicsRAM
E6750 G0 @ 3.3GHz (1.25V LOAD) Asus P5KPL-VM G31 GeForce 8500GT @ 700/1600/445 Apacer 2x1GB 800MHz 
Hard DriveOptical DriveOSMonitor
Hitachi Deskstar 160GB (7200,8MB) LG DVD Win 7 Ultimate 64bit build 7601 LG 19" 
KeyboardPowerCaseMouse
5$ keyboard Cheap stuff Linkworld crappy/modded SmartBox cheap 
Mouse Pad
N/A 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › >> Q9300 Club <<