So what temps are you all getting on your Q6600's? I know room temp etc comes into play but still nice to compare ;] I'm stable at 3ghz now but i'm idleing in the high 30's
I know that isn't to bad but i'd prefer to stay around 30-33
I just reseated my V2
I had it so the fan was blowing up towards the top of my case it's now blowing towards the rear exhaust fan and that shaved off a couple of degrees, I don't like the plastic push pins though on full load cores 1-2 are 5-7 degrees hotter than 3-4, isn't much difference but I think the pressure isn't very even with the push pins, I plan on reseating it a few more times untill I get it perfect but I need some AS5 first ;[ Plus a bolt on bracket maybe.
Anyway I tried the 8x multi like you suggested and it didn't like it, wouldn't boot at all and I had to reset CMOS. So i'm back at 9x335, I tried going to 3.2ghz but I failed prime only after 10 minutes, I do have my voltage set to auto though ;x I should really manualy set that but i'm scared of voltages like I was of flashing
Is there no way to save profiles in the bios?