Originally Posted by Blameless
tRD / Performance Level is 6; best I can manage with 100% stability with a 456MHz FSB.
Yeah, I thought so, I donÂ´t think PL5 is possible because your have already pushed the limit with PL6.
With that memspeed (1141) and (CAS5), the limit for PL6 is at FSB ~438, so you have pushed a bit when you got it to work at FSB 456 and the main reason for that I think is NBv 1,65 and Control fine delay 350ps.
WhatÂ´s your thoughts?
I canÂ´t get my Kingston HyperX PC9600 2x1 to be stable with your setup on my Rampage, I think itÂ´s my HyperX that canÂ´t handle it because they are Micron D9GKX and even thou I push NBv to 1,75 DRAMv to 2,35 I canÂ´t do a Super PI 1M run without a fault.
I have some Kingston HyperX PC8500 4x1 (Elpida) and with them I can run
450 9 4,05 1128 4-5-5-15 PL6 NBv 1,41 DRAMv 2,12
432 9 3,88 1151 5-5-5-15 PL6 NBv 1,51 DRAMv 2,20 Clock Skew 350ps
480 8 3,84 1153 5-5-5-15 PL7 NBv 1,51 DRAMv 2,20 Clock Skew 350ps
and they are stable, I may try them with your setup just for fun.
I see that you have set your CPU GTL Ref volt to 0,61X, is that better on those 45nm then 0,63X, whatÂ´s your opinion about it.