hey guys, long time no update so heres a big one for yea
got a new camera btw :up: D60 yay anyways here we go
small update guys, did some modding on the power switch panel
i attached the original power switch button to a small momentary
switch for the stealthed drive, and its obviously painted black
ek top is on and ready! wish i had tube to spare i need to
flush the system, but i have any to spare anyways just some
progress, im impressed with eddy, he fix the SB right up! :up:
alot of work needs to be done. the radgrill was horrible.. hole
placement was pretty bad, never though this would be an issue
but it turns out it was made more problems then solved. i think
the best thing to do is to commission a machinist to make me
one because i am not happy with the ACRYAN radgrill.. i still
to do some more cutting to the case to fully fit the rad with out
the fans touching the mobo/etc. cutting the case was not much
fun either, alot of hard manual labor, but it did get enough of it
cut where i could atleast install the rad for inspection.
started tubing the mobo, to find the new SB giving me issues
again, with 3/4" OD tubing there is NO, i repeat NO room to install
the second tube, i switched fittings in the end so the SB now uses
a slightly smaller barb so i could at least tiptie it down. its ok now
but i was surprised.
so loop orders go like this:
loop1: 24v D5 - 360GTX - EK Supreme - SB - NB - 150RES Rev1
loop2: DDC 3.2 w/ XSPC top - mosfet - mosfet - DD Ione - DD Ione - 150RES Rev2
got most of the basic design of my rad grill done, turns
out swiftech's dimensions are really wrong, one thing
i did forget to measure is the length and width of the rad
so if thats wrong too, then its back to the drawing board.
literally.. well needed to test the meanwell, so i decided
to do some modding to that as well. simple, effective. now
all that is left is a power switch and a relay. then it should
be ready to go. right now, whats really holding me back is
the top mounted rad. so the sooner i can get this radgrill
made, the better.
radgrill pics in a few
heres a version of my grill with inspiration from charles_h
and his murderbox
big +ups to charles :clap: now my version is obviously a bit fatter for air flow
which makes it loose its elegance.. :shakes: this is one of the many different
designs ive done, just havent posted. this one i just rendered really quickly
just to show you guys. dont worry about the front, its just a mock up, just
wanted to see how it would look.
still need to check the dimensions of the rad grill again, to makes sure that
it fits, as of now everything fits perfectly, with my rad grill it lifts the rad
5mm giving me enough space to clear the mobo and etc. still need to cut
the mobo tray, and might need to change a few things but would make
things much more enjoyable.
heres another version, i let it render longer so its cleaner