Overclock.net › Forums › Cooling › Water Cooling › Build me a w/c setup!
New Posts  All Forums:Forum Nav:

Build me a w/c setup!

post #1 of 17
Thread Starter 
Hey guys , If I wanted to cool my :

2x 9800's

my NB

My cpu

all with one radiator , would that be possible?

would my current Exos koolance beable to handle that??

im just w/c my cpu atm , getting temps of 65C max load with fan on low , can get it down to 55c with fan on high..

budget = $500
Edited by porky - 5/15/08 at 5:56pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
post #2 of 17
One rad could do work but I'd seriously suggest removing the NB waterblock from consideration as it's really not necessary at all, it will just take away from the loop. Considering how much heat will be in the loop already, any extra heat/restriction is what you want to avoid.

I can put a loop together for you but $500 is impossible considering the GPU blocks for the GTX cost $110 each.
post #3 of 17
Actually, he has a 780i, so it could be of benefit to watercool the nb and the chip next to it, they run very hot.


CPU block.



2x GPU blocks.


2x 9800 ramsink/mosfet sinks if you want them.

Radiator


Pump



Res


NB block.
post #4 of 17
Thread Starter 
also , I would like a radiator that would fit inside my cosmos s case!!!...will the one you suggested fit?
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
post #5 of 17
Thread Starter 
ok if need be i can make budget 600max
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
post #6 of 17
I'd suggest a GTX360 up top and a GTS 360 custom mounted at the bottom then if you're gonna want it all internal. Check out page 13 of this thread to see what I mean. http://www.overclock.net/computer-ca...00-thread.html
post #7 of 17
Thread Starter 
Hows this look :

http://www.petrastechshop.com/hwlablicegtx1.html -- Radiator

http://www.petrastechshop.com/dfuv2uncpuwa.html -- CPU block

http://www.petrastechshop.com/ek78chwaa.html -- Chipset block

http://www.petrastechshop.com/laddcwpeddto.html ----Pump

http://www.petrastechshop.com/ekremure.html ---- Resouvour

http://www.petrastechshop.com/ekfucowaforn2.html --- GPU block x2

Total = 612$


Please let me know what else i need , tubing wana order everything at once , also how difficult is it to install all of this?

thanks

porky-
Edited by porky - 5/16/08 at 8:43am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
post #8 of 17
All looks very good except I really don't think that one GTX360 is gonna be enough to cool all those components. I really suggest adding at least another GTS240 or 360 if you can find the money. Otherwise you probably won't get any better results than air.
post #9 of 17
Thread Starter 
could i put one of these by the fan in the back of my case :

http://www.petrastechshop.com/dadenblicepr.html

use that for the NB?

or just "link" everything together , soo ill have 1x 360 radiator and one of those?

also what tubing do i need and the little stuff? i see lots of like connectors and stuff and im not familiar with that!

or if I do leave the NB out , would that be sufficient?
Edited by porky - 5/16/08 at 9:05am
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 4790K 4.8GHZ 1.35V MSI Z97 M-Power EVGA GTX 980 Superclocked 16GB Corsair Vengeance 
Hard DriveOSMonitorPower
4x1TB 7,200RPM , 1x128GB Samsung SSD 1x 128GB K... Windows 7 64Bit Ultimate Samsung SA950D+ Optoma HD82 Antec 1000W Platinum 
CaseMouse
NZXT Phantom Logitech G7 
  hide details  
Reply
post #10 of 17
You could put it back there but it will be cramped. You'd be better served putting it at the bottom of the Cosmos where there is a vent for a 120mm fan. I would link them all though because a seperate loop just for the NB is pretty pointless.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Build me a w/c setup!