Overclock.net › Forums › Intel › Intel CPUs › e6750 Overclocking Help.
New Posts  All Forums:Forum Nav:

e6750 Overclocking Help.

post #1 of 29
Thread Starter 
Ok I have an e6750 C2D @ 2.88 right now with the stock voltage of 1.35.

Im a noob at overclocking CPUs so help me out.

Im not sure if its the summer heat or what but did overclocking from 2.66 to 2.88 make me jump +10C on idle than my original 32C at 2.66? will lowering my voltage help with any cooling?

Help me out with the overclocking and voltages please.

Thanks.
post #2 of 29
Need more info, system specs filled in mobo/case/gpu. Easy temp fix, go into bios and look for cpu fan control, disable and put in manual and set cpu fan to 100%. I'll help more w/info update.
post #3 of 29
Thread Starter 
Case: CM 690
PSU: XCLIO STABLEPOWER 500W
MoBo: GIGABYTE GA-P35-DS3L
CPU HSF: ARCTIC COOLING Freezer 7 Pro
GPU: 8600 GT 256mb
RAM: G.SKILL 2GB (2 x 1GB) 240-Pin DDR2

I know the bios fan control. The thing is at 100% sped it sounds like a freaking rocket is launching!
post #4 of 29
By how much did load temps increase?
post #5 of 29
Do you have eist,thermal control, spread spectrums disabled? What are u using for temp indication? Try everest, more accurate. Your temps shouldn't be up that much with small OC.
post #6 of 29
Thread Starter 
Everest is showing 38C Idle and max 57C during gaming.

Mind going over the "eist, thermal control, spread spectrums"?
post #7 of 29
Bios settings. They basically take off the brakes to OCing, and help stability. What is room (ambient temp)?

Here is all you need to read...
http://www.overclock.net/intel-mothe...3l-thread.html
Reset defaults in bios and start over with the above step by step link.
Edited by pig69 - 5/17/08 at 6:06pm
post #8 of 29
Thread Starter 
Will it damage the CPU if I have a bad overclock?
post #9 of 29
Bad has a lot of meanings. It's hard to hurt your processor with newer boards because they shut-down and revert to previous settings if something is threatened.
Spaghetti II
(15 items)
 
  
CPUMotherboardGraphicsRAM
[i7 870 @ 3.88, 1.38v] [Asus P7P55 LX (1201)] [2x XFX 6870 (900/4200)] [Crucial Ballistix 4GB] 
Hard DriveCoolingOSMonitor
[WD Black 1TB + LacieUSB 320] Megahalem + 2x FM121s [W7 Home Premium 64] [Samsung BX2440] 
KeyboardPowerCaseMouse
[Ducky 9008G2, Brown] [Silverstone DA750] [Lian-Li PC 7B Plus II] [Razer Deathadder 3.5G] 
Mouse PadAudio
[Steelseries SX Aluminum] [AudioGD Compass/AKG Q701] 
  hide details  
Reply
Spaghetti II
(15 items)
 
  
CPUMotherboardGraphicsRAM
[i7 870 @ 3.88, 1.38v] [Asus P7P55 LX (1201)] [2x XFX 6870 (900/4200)] [Crucial Ballistix 4GB] 
Hard DriveCoolingOSMonitor
[WD Black 1TB + LacieUSB 320] Megahalem + 2x FM121s [W7 Home Premium 64] [Samsung BX2440] 
KeyboardPowerCaseMouse
[Ducky 9008G2, Brown] [Silverstone DA750] [Lian-Li PC 7B Plus II] [Razer Deathadder 3.5G] 
Mouse PadAudio
[Steelseries SX Aluminum] [AudioGD Compass/AKG Q701] 
  hide details  
Reply
post #10 of 29
No, only cause you to crash or not boot up. Rasising voltages too high or too fast will cause you $$$ loss. Sloow and easy will reward you.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › e6750 Overclocking Help.