Overclock.net › Forums › Intel › Intel CPUs › e6750 Overclocking Help.
New Posts  All Forums:Forum Nav:

e6750 Overclocking Help. - Page 2

post #11 of 29
Thread Starter 
Ok I disabled all that and raised my CPU to 3.0Ghz and the voltage went up to 1.4.

At idle its at 40C and on load with 100% stress test for 10 minutes max temp was 60C
post #12 of 29
What did you stress test with?, TAT is true 100%, orthos is 85% test. What is room temp? Case fans on highest speed? 60C is OK but a little high.
post #13 of 29
Thread Starter 
I used Prime 2004. Not sure what room temp is, but its hotter than usual with the heat waves, etc. Case fans were all at 1200+ RPM.
post #14 of 29
Try lowering core volts by .05v each time until not booting to windows. That will determine when you are stable. Try adding another side fan or put in a top fan (if not already) room temp sound like your main factor. 40C=>100F which is ok if your room is >80F. More fans!
post #15 of 29
Thread Starter 
I have 2 side fans(in), 1 top fan(out), 1 front fan(in) and 1 back fan(out)

Seems more like 85 in my room. How do I disable the auto volatge?
post #16 of 29
Quote:
Originally Posted by pig69 View Post
Bios settings. Here is all you need to read...
http://www.overclock.net/intel-mothe...3l-thread.html
.
MB Intelligent Tweaker(M.I.T.)
CPU Clock Ratio: Allows you to alter the clock ratio for the installed CPU.
CPU Host Clock Control: Enables or disables the control of CPU host clock. Enabled will allow the CPU Host Frequency
item below to be configurable.
CPU Host Frequency (Mhz): Allows you to manually set the CPU host frequency.
PCI Express Frequency(Mhz): Allows you to manually set the PCIe clock frequency.
System Memory Multiplier: Allows you to set the system memory multiplier.
System Voltage Control: Determines whether to manually set the system voltages.
DDR2 OverVoltage Control: Allows you to set the memory voltage.
PCI-E OverVoltage Control: Allows you to set the PCIe bus voltage.
FSB OverVoltage Control: Allows you to set the Front Side Bus voltage.
(G)MCH OverVoltage Control: Allows you to set the North Bridge voltage.
CPU Voltage Control: Allows you to set the CPU voltage.
post #17 of 29
Thread Starter 
How can I check my current voltage? I think its at like 1.325 or something, Is lower better?
post #18 of 29
Lower volts means lower heat generated. You want best OC with lowest voltage. Balance the 2.
post #19 of 29
Thread Starter 
Ok Thanks, my idle temps dropped to 36C now.
How can I check my voltages?
post #20 of 29
Quote:
Originally Posted by pig69 View Post
Try everest.
There is a voltage menu in it. or volts are displayed in the bios.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › e6750 Overclocking Help.