Overclock.net › Forums › Intel › Intel CPUs › E6750 Oc Q
New Posts  All Forums:Forum Nav:

E6750 Oc Q

post #1 of 22
Thread Starter 
I was stable w. stock vcore at 3.2ghz. But of course I want more, so right now im at 3.4ghz, 425x8, vcore at 1.42ish, temps 34 idle, havent tested under Prime95 yet because my DRAM freq is at 425mhz. How do I bring the DRAM down to 400 (as I heard is best lower at 400 for OCing), I have the bios setting on manual with 2.0 divider.. my ram is 5-5-5-15 also. Thanks guys
rig1
(13 items)
 
  
CPUMotherboardGraphicsRAM
e6750 @ 3.4ghz (1.35vcore) Gigabyte P35-DS3L EVGA 88GTS G92 (770/1030) G.Skill 4gb DDR2 800 
Hard DriveOptical DriveOSMonitor
Seagate 500gb LightScribe Windows 7 64bit Hanns-G 19" WS 
KeyboardPowerCaseMouse
Logitech Media OCZ GameXstream 700 Antec Nine Hundred MX518 
Mouse Pad
Icemat 
  hide details  
Reply
rig1
(13 items)
 
  
CPUMotherboardGraphicsRAM
e6750 @ 3.4ghz (1.35vcore) Gigabyte P35-DS3L EVGA 88GTS G92 (770/1030) G.Skill 4gb DDR2 800 
Hard DriveOptical DriveOSMonitor
Seagate 500gb LightScribe Windows 7 64bit Hanns-G 19" WS 
KeyboardPowerCaseMouse
Logitech Media OCZ GameXstream 700 Antec Nine Hundred MX518 
Mouse Pad
Icemat 
  hide details  
Reply
post #2 of 22
Don't use a divider, just set it to unlinked.
post #3 of 22
Thread Starter 
so set it back to auto and leave it like that?
rig1
(13 items)
 
  
CPUMotherboardGraphicsRAM
e6750 @ 3.4ghz (1.35vcore) Gigabyte P35-DS3L EVGA 88GTS G92 (770/1030) G.Skill 4gb DDR2 800 
Hard DriveOptical DriveOSMonitor
Seagate 500gb LightScribe Windows 7 64bit Hanns-G 19" WS 
KeyboardPowerCaseMouse
Logitech Media OCZ GameXstream 700 Antec Nine Hundred MX518 
Mouse Pad
Icemat 
  hide details  
Reply
rig1
(13 items)
 
  
CPUMotherboardGraphicsRAM
e6750 @ 3.4ghz (1.35vcore) Gigabyte P35-DS3L EVGA 88GTS G92 (770/1030) G.Skill 4gb DDR2 800 
Hard DriveOptical DriveOSMonitor
Seagate 500gb LightScribe Windows 7 64bit Hanns-G 19" WS 
KeyboardPowerCaseMouse
Logitech Media OCZ GameXstream 700 Antec Nine Hundred MX518 
Mouse Pad
Icemat 
  hide details  
Reply
post #4 of 22
Well no. In the FSB and Memory tab there should eb an option to set it as unlinked or "manual".
post #5 of 22
Intel chipsets don't have an 'unlinked' option. So, he's better of just setting it 1:1. It's actually better to run the RAM 1:1, and thus 425MHz is perfect! The RAM can easily handle that speed (and then some).
    
CPUMotherboardGraphicsRAM
E8400 @ 3.8 GHz DFI LANPARTY DK X38-T2R eVGA 8400GS 2GB Mushkin DDR2 800 (single stick) 
Hard DriveOptical DriveOSMonitor
250GB WD SATA None Windows XP Pro 32-bit HP Pavilion f1703 
KeyboardPowerCaseMouse
N/A Corsair HX520 Coolermaster Cavalier N/A 
Mouse Pad
N/A 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400 @ 3.8 GHz DFI LANPARTY DK X38-T2R eVGA 8400GS 2GB Mushkin DDR2 800 (single stick) 
Hard DriveOptical DriveOSMonitor
250GB WD SATA None Windows XP Pro 32-bit HP Pavilion f1703 
KeyboardPowerCaseMouse
N/A Corsair HX520 Coolermaster Cavalier N/A 
Mouse Pad
N/A 
  hide details  
Reply
post #6 of 22
Thread Starter 
yeah it is at unlinked then i set the divider to 2.0 which should make it 400x2 = 800 correct?
rig1
(13 items)
 
  
CPUMotherboardGraphicsRAM
e6750 @ 3.4ghz (1.35vcore) Gigabyte P35-DS3L EVGA 88GTS G92 (770/1030) G.Skill 4gb DDR2 800 
Hard DriveOptical DriveOSMonitor
Seagate 500gb LightScribe Windows 7 64bit Hanns-G 19" WS 
KeyboardPowerCaseMouse
Logitech Media OCZ GameXstream 700 Antec Nine Hundred MX518 
Mouse Pad
Icemat 
  hide details  
Reply
rig1
(13 items)
 
  
CPUMotherboardGraphicsRAM
e6750 @ 3.4ghz (1.35vcore) Gigabyte P35-DS3L EVGA 88GTS G92 (770/1030) G.Skill 4gb DDR2 800 
Hard DriveOptical DriveOSMonitor
Seagate 500gb LightScribe Windows 7 64bit Hanns-G 19" WS 
KeyboardPowerCaseMouse
Logitech Media OCZ GameXstream 700 Antec Nine Hundred MX518 
Mouse Pad
Icemat 
  hide details  
Reply
post #7 of 22
Oh, didn't know that! My bad.
post #8 of 22
still linked If you set the divider at 2, your RAM will run at 800MHz, which is DDR2 1600 speeds(!) No way your RAM can handle that

Set it at 1, and the RAM will run at 425MHz, which is DDR2 850 speeds. That's the best settign.

'unlinked' means that you can manually enter the RAM speed, but this funcionality is only supported on boards with an nVidia chipset.
    
CPUMotherboardGraphicsRAM
E8400 @ 3.8 GHz DFI LANPARTY DK X38-T2R eVGA 8400GS 2GB Mushkin DDR2 800 (single stick) 
Hard DriveOptical DriveOSMonitor
250GB WD SATA None Windows XP Pro 32-bit HP Pavilion f1703 
KeyboardPowerCaseMouse
N/A Corsair HX520 Coolermaster Cavalier N/A 
Mouse Pad
N/A 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400 @ 3.8 GHz DFI LANPARTY DK X38-T2R eVGA 8400GS 2GB Mushkin DDR2 800 (single stick) 
Hard DriveOptical DriveOSMonitor
250GB WD SATA None Windows XP Pro 32-bit HP Pavilion f1703 
KeyboardPowerCaseMouse
N/A Corsair HX520 Coolermaster Cavalier N/A 
Mouse Pad
N/A 
  hide details  
Reply
post #9 of 22
Their is no way to set it below 1:1, or 2.0 as shown in bios. You should be fine even if your OC the ram, had my 800mhz OCZ up to 926mhz 5-5-5-15, no problems, that's at 3.7Ghz on the E6750.
BAM!
(13 items)
 
M-ITX
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel i5 6600k Gigabyte GA-Z170X-Designaire EVGA GTX 1080 FTW ACX 3.0 16GB Corsair Vengeance DDR4 3200Mhz 
Hard DriveHard DriveCoolingOS
Toshiba OCZ RD400 512GB 2x Sandisk Ultra II 960GB Raid 0 Custom Water Loop Windows 10 Pro 
MonitorKeyboardPowerCase
Dell S2716DG Steelseries 7G EVGA P2 1000w Phanteks Enthoo Pro M Acrylic 
Mouse
Logitech G500s 
CPUMotherboardGraphicsRAM
i7 4790k asrock z97e-itx/ac MSI GTX 1060 6GT OC Crucial Balistic ULP DDR3 2x4GB 1600mhz  
Hard DriveHard DriveCoolingOS
PNY Optimus 240GB WD Blue 1TB Corsair H55 120mm AIO Microsoft Windows 10 
PowerCase
Corsair SF600 Silverstone Raven RVZ-01 
  hide details  
Reply
BAM!
(13 items)
 
M-ITX
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel i5 6600k Gigabyte GA-Z170X-Designaire EVGA GTX 1080 FTW ACX 3.0 16GB Corsair Vengeance DDR4 3200Mhz 
Hard DriveHard DriveCoolingOS
Toshiba OCZ RD400 512GB 2x Sandisk Ultra II 960GB Raid 0 Custom Water Loop Windows 10 Pro 
MonitorKeyboardPowerCase
Dell S2716DG Steelseries 7G EVGA P2 1000w Phanteks Enthoo Pro M Acrylic 
Mouse
Logitech G500s 
CPUMotherboardGraphicsRAM
i7 4790k asrock z97e-itx/ac MSI GTX 1060 6GT OC Crucial Balistic ULP DDR3 2x4GB 1600mhz  
Hard DriveHard DriveCoolingOS
PNY Optimus 240GB WD Blue 1TB Corsair H55 120mm AIO Microsoft Windows 10 
PowerCase
Corsair SF600 Silverstone Raven RVZ-01 
  hide details  
Reply
post #10 of 22
Quote:
Originally Posted by Chozart View Post
still linked If you set the divider at 2, your RAM will run at 800MHz, which is DDR2 1600 speeds(!) No way your RAM can handle that

Set it at 1, and the RAM will run at 425MHz, which is DDR2 850 speeds. That's the best settign.

'unlinked' means that you can manually enter the RAM speed, but this funcionality is only supported on boards with an nVidia chipset.
2.0 is 1:1 in the Gigabyte bios.
BAM!
(13 items)
 
M-ITX
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel i5 6600k Gigabyte GA-Z170X-Designaire EVGA GTX 1080 FTW ACX 3.0 16GB Corsair Vengeance DDR4 3200Mhz 
Hard DriveHard DriveCoolingOS
Toshiba OCZ RD400 512GB 2x Sandisk Ultra II 960GB Raid 0 Custom Water Loop Windows 10 Pro 
MonitorKeyboardPowerCase
Dell S2716DG Steelseries 7G EVGA P2 1000w Phanteks Enthoo Pro M Acrylic 
Mouse
Logitech G500s 
CPUMotherboardGraphicsRAM
i7 4790k asrock z97e-itx/ac MSI GTX 1060 6GT OC Crucial Balistic ULP DDR3 2x4GB 1600mhz  
Hard DriveHard DriveCoolingOS
PNY Optimus 240GB WD Blue 1TB Corsair H55 120mm AIO Microsoft Windows 10 
PowerCase
Corsair SF600 Silverstone Raven RVZ-01 
  hide details  
Reply
BAM!
(13 items)
 
M-ITX
(10 items)
 
 
CPUMotherboardGraphicsRAM
Intel i5 6600k Gigabyte GA-Z170X-Designaire EVGA GTX 1080 FTW ACX 3.0 16GB Corsair Vengeance DDR4 3200Mhz 
Hard DriveHard DriveCoolingOS
Toshiba OCZ RD400 512GB 2x Sandisk Ultra II 960GB Raid 0 Custom Water Loop Windows 10 Pro 
MonitorKeyboardPowerCase
Dell S2716DG Steelseries 7G EVGA P2 1000w Phanteks Enthoo Pro M Acrylic 
Mouse
Logitech G500s 
CPUMotherboardGraphicsRAM
i7 4790k asrock z97e-itx/ac MSI GTX 1060 6GT OC Crucial Balistic ULP DDR3 2x4GB 1600mhz  
Hard DriveHard DriveCoolingOS
PNY Optimus 240GB WD Blue 1TB Corsair H55 120mm AIO Microsoft Windows 10 
PowerCase
Corsair SF600 Silverstone Raven RVZ-01 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › E6750 Oc Q