For mounting a touchpad and internaly wiring it, I'm wanting to chop off about 2' of wire.
I then thought it would be easier to have it as a USB! So I chopped the wire and wired it to a USB
USB was :
(Ground pin): Sheath
Pin 1:Red
Pin 2:White
Pin 3:Green
Pin 4:Black
and the PS/2:
Sheath
Blue
Orange
White
Green
Which I connected as:
Sheath -> Ground pin
Blue--> Pin 1
Orange--> Pin 2
White--> Pin 3
Green--> Pin 4
I got "unrecognized device"??
Any tips/ pinout conversions?
Cheers
Thanks for any Help

I then thought it would be easier to have it as a USB! So I chopped the wire and wired it to a USB
USB was :
(Ground pin): Sheath
Pin 1:Red
Pin 2:White
Pin 3:Green
Pin 4:Black
and the PS/2:
Sheath
Blue
Orange
White
Green
Which I connected as:
Sheath -> Ground pin
Blue--> Pin 1
Orange--> Pin 2
White--> Pin 3
Green--> Pin 4
I got "unrecognized device"??
Any tips/ pinout conversions?
Cheers
Thanks for any Help






















