Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Cable sleeving noob in distress!
New Posts  All Forums:Forum Nav:

Cable sleeving noob in distress!

post #1 of 11
Thread Starter 
So,I recently started my first cable-sleeving project, briefly glanced over spooky's cable-sleeving guide, and said "Meh, How hard could it be?"

Well its a *****.

So, Here are my problems:

1) I mixed up the black cables, are they the same voltage? Does it matter which is which? I know two of them are in the middle.
2) When im heating up the heat-shrink, I feel the PSU wires get warm/hot. Is this dangerous?
3)Whats a good way of testing my PSU BEFORE I put it back in my comp?
4)Whats the best way to apply heat? Im haggardly holding it over my stove right now

Previously using matches XD
    
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 Black Edition 5000. (3.2GHz) Gigabyte GA-M770-DS3 eVGA 8800 GTS 512 (G92) 2 GB Corsair XMS 
Hard DriveOptical DriveOSMonitor
Seagate 250GB 7200RPM + 80GB 7200RPM Lite-On CD Burner Windows Vista Home Basic (OEM) 64-bit Crappy thing... 
PowerCaseMouse
Okia 600W PSU Sunbeam Transformer Microsoft Optical Mouse 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 Black Edition 5000. (3.2GHz) Gigabyte GA-M770-DS3 eVGA 8800 GTS 512 (G92) 2 GB Corsair XMS 
Hard DriveOptical DriveOSMonitor
Seagate 250GB 7200RPM + 80GB 7200RPM Lite-On CD Burner Windows Vista Home Basic (OEM) 64-bit Crappy thing... 
PowerCaseMouse
Okia 600W PSU Sunbeam Transformer Microsoft Optical Mouse 
  hide details  
Reply
post #2 of 11
1) Both are GND so it doesn't matter.
2) No as long as the wire covering isn't melting
3) On the 24-pin plug, connect the Green wire to Black wire.
4) Heatgun or Hairdryer
Once again...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 [4.28GHz, HT] Asus P6T + Broadcom NetXtreme II VisionTek HD5850 [900/1200] + Galaxy GT240 2x4GB G.Skill Ripjaw X [1632 MHz] 
Hard DriveOSMonitorKeyboard
Intel X25-M 160GB + 3xRAID0 500GB 7200.12 Window 7 Pro 64 Acer H243H + Samsung 226BW XARMOR-U9BL  
PowerCaseMouseMouse Pad
Antec Truepower New 750W Li Lian PC-V2100 [10x120mm fans] Logitech G9 X-Trac Pro 
  hide details  
Reply
Once again...
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 [4.28GHz, HT] Asus P6T + Broadcom NetXtreme II VisionTek HD5850 [900/1200] + Galaxy GT240 2x4GB G.Skill Ripjaw X [1632 MHz] 
Hard DriveOSMonitorKeyboard
Intel X25-M 160GB + 3xRAID0 500GB 7200.12 Window 7 Pro 64 Acer H243H + Samsung 226BW XARMOR-U9BL  
PowerCaseMouseMouse Pad
Antec Truepower New 750W Li Lian PC-V2100 [10x120mm fans] Logitech G9 X-Trac Pro 
  hide details  
Reply
post #3 of 11
1. Black wires are ground, it shouldn't make a difference if they are mixed up.

2. As long as it's not hot enough to melt the sheathing, you're fine.

3. plug it into some fans to load it, then bridge the green wire and a ground wire (on the ATX connector) with something conductive (paper clip works).

4. Heat gun, or a hot running hair dryer.

Edit: Looks like Duckie beat me to it.
Edited by Blameless - 5/22/08 at 12:14pm
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.3/3.6GHz core/uncore, 1.225/1.2v Gigabyte X99 SOC Champion (F22n) 2x Sapphire R9 290X Tri-X OC New Edition (10036... 4x4GiB Crucial @ 2667, 12-11-12-27-T1, 1.37v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.05) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Cooler Master Nepton 280L 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Reference R9 290X w/Stilt's MLU 1000e / 1375m E... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
post #4 of 11
Thread Starter 
Okay...

So I accidently melted the sheathing of one of the wires (Ground). I dont know if it was enough to mess it up, but, since it was one of the connectors i dont need (Floppy), do you think I could just cut it off?
    
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 Black Edition 5000. (3.2GHz) Gigabyte GA-M770-DS3 eVGA 8800 GTS 512 (G92) 2 GB Corsair XMS 
Hard DriveOptical DriveOSMonitor
Seagate 250GB 7200RPM + 80GB 7200RPM Lite-On CD Burner Windows Vista Home Basic (OEM) 64-bit Crappy thing... 
PowerCaseMouse
Okia 600W PSU Sunbeam Transformer Microsoft Optical Mouse 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 Black Edition 5000. (3.2GHz) Gigabyte GA-M770-DS3 eVGA 8800 GTS 512 (G92) 2 GB Corsair XMS 
Hard DriveOptical DriveOSMonitor
Seagate 250GB 7200RPM + 80GB 7200RPM Lite-On CD Burner Windows Vista Home Basic (OEM) 64-bit Crappy thing... 
PowerCaseMouse
Okia 600W PSU Sunbeam Transformer Microsoft Optical Mouse 
  hide details  
Reply
post #5 of 11
I think you should:

1) stop using an open flame for this, and get a hair dryer or inexpensive heat gun
2) get some electrical tape and repair the insulation for the ground wire for the floppy connector, only if the damage is to one terminal, and is minor (post a pic of damage). Wouldnt go cutting it off just yet.
Chuckle2Tits
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 2.66 45nm D0 Foxconn BloodRage x58 EVGA GTX 285 6 GB Corsair Dom. DDR3 1600 
Hard DriveOptical DriveOSMonitor
1x300 GB WD Velociraptor Asus 16/48 DVD/CD ROM SATA Windows 7 Pro 64 bit Viewsonic VX2255wmb 22" LCD 
KeyboardPowerCaseMouse
Logitech USB wired Silverstone Decathalon 850 PolymorphiX (PMX_v1s) ms optical, wired 
Mouse Pad
ancient piece of crap :P 
  hide details  
Reply
Chuckle2Tits
(13 items)
 
  
CPUMotherboardGraphicsRAM
Core i7 920 2.66 45nm D0 Foxconn BloodRage x58 EVGA GTX 285 6 GB Corsair Dom. DDR3 1600 
Hard DriveOptical DriveOSMonitor
1x300 GB WD Velociraptor Asus 16/48 DVD/CD ROM SATA Windows 7 Pro 64 bit Viewsonic VX2255wmb 22" LCD 
KeyboardPowerCaseMouse
Logitech USB wired Silverstone Decathalon 850 PolymorphiX (PMX_v1s) ms optical, wired 
Mouse Pad
ancient piece of crap :P 
  hide details  
Reply
post #6 of 11
IF you do cut it off, I would recommend you reattach the ground wire... just in case you need that floppy connector. You never know.

All you need is nail clippers, and a pin.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8Z68-V Pro Crossfire HD 5870's 4x4 GB G.skill Ripjaws 
Hard DriveOSMonitorPower
WD Caviar Black 1 TB Windows 7 x64 build 7000 Syncmaster 226BW x 2 Corsair HX650 
Case
Tech station 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8Z68-V Pro Crossfire HD 5870's 4x4 GB G.skill Ripjaws 
Hard DriveOSMonitorPower
WD Caviar Black 1 TB Windows 7 x64 build 7000 Syncmaster 226BW x 2 Corsair HX650 
Case
Tech station 
  hide details  
Reply
post #7 of 11
Thread Starter 
Yeah, So, I tried to turn my PSU on by itself (Took a paper-clip from Green to Black, correct?), and you see - The PSU itself has LED fans, but when I hit the switch in the back, the LEDs blink for a TINY second, and go out...

Did I blow my PSU?
    
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 Black Edition 5000. (3.2GHz) Gigabyte GA-M770-DS3 eVGA 8800 GTS 512 (G92) 2 GB Corsair XMS 
Hard DriveOptical DriveOSMonitor
Seagate 250GB 7200RPM + 80GB 7200RPM Lite-On CD Burner Windows Vista Home Basic (OEM) 64-bit Crappy thing... 
PowerCaseMouse
Okia 600W PSU Sunbeam Transformer Microsoft Optical Mouse 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 Black Edition 5000. (3.2GHz) Gigabyte GA-M770-DS3 eVGA 8800 GTS 512 (G92) 2 GB Corsair XMS 
Hard DriveOptical DriveOSMonitor
Seagate 250GB 7200RPM + 80GB 7200RPM Lite-On CD Burner Windows Vista Home Basic (OEM) 64-bit Crappy thing... 
PowerCaseMouse
Okia 600W PSU Sunbeam Transformer Microsoft Optical Mouse 
  hide details  
Reply
post #8 of 11
Thread Starter 
Nevermind, found the problem. Some of the wires without Molex connections were causing an odd grounding issue. Unfortunately, My cable-sleeving job is going sloppily.
    
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 Black Edition 5000. (3.2GHz) Gigabyte GA-M770-DS3 eVGA 8800 GTS 512 (G92) 2 GB Corsair XMS 
Hard DriveOptical DriveOSMonitor
Seagate 250GB 7200RPM + 80GB 7200RPM Lite-On CD Burner Windows Vista Home Basic (OEM) 64-bit Crappy thing... 
PowerCaseMouse
Okia 600W PSU Sunbeam Transformer Microsoft Optical Mouse 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD Athlon 64 X2 Black Edition 5000. (3.2GHz) Gigabyte GA-M770-DS3 eVGA 8800 GTS 512 (G92) 2 GB Corsair XMS 
Hard DriveOptical DriveOSMonitor
Seagate 250GB 7200RPM + 80GB 7200RPM Lite-On CD Burner Windows Vista Home Basic (OEM) 64-bit Crappy thing... 
PowerCaseMouse
Okia 600W PSU Sunbeam Transformer Microsoft Optical Mouse 
  hide details  
Reply
post #9 of 11
BEFORE YOU PLUG ANYTHING IN PLEASE FOR THE LOVE READ MY POST.

On the Molex connectors there are numbers printed on one side.

1 - Yellow
2 - black
3 - black
4 - red

Always put them this way or you're going to blow something to hell and back. Also, take some time and get yourself some masking tape and number the cables as well. This is a must if you're messing with the ATX motherboard connectors. I hope this helps.
Kamtastic II
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X4 630 Gigabyte GA-MA790GP-UD4H Visiontek 4850 512MB Reference 8GB A-Data DDR2 800 
Hard DriveOptical DriveOSMonitor
750GB Caviar Black Currently Samsung 20x SH2022 Windows 7 Ultimate x64 2 x Samsung Synchmaster 226BW 
KeyboardPowerCaseMouse
Logitech G11 OCZ 700w GameXStream Thermaltake V9 Black Edition Razer Copperhead 
  hide details  
Reply
Kamtastic II
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD Athlon II X4 630 Gigabyte GA-MA790GP-UD4H Visiontek 4850 512MB Reference 8GB A-Data DDR2 800 
Hard DriveOptical DriveOSMonitor
750GB Caviar Black Currently Samsung 20x SH2022 Windows 7 Ultimate x64 2 x Samsung Synchmaster 226BW 
KeyboardPowerCaseMouse
Logitech G11 OCZ 700w GameXStream Thermaltake V9 Black Edition Razer Copperhead 
  hide details  
Reply
post #10 of 11
Quote:
Originally Posted by KamuiRSX View Post
BEFORE YOU PLUG ANYTHING IN PLEASE FOR THE LOVE READ MY POST.

On the Molex connectors there are numbers printed on one side.

1 - Yellow
2 - black
3 - black
4 - red

Always put them this way or you're going to blow something to hell and back. Also, take some time and get yourself some masking tape and number the cables as well. This is a must if you're messing with the ATX motherboard connectors. I hope this helps.
No wai... *checks molex*

Holey moley, there are! Normally I just hold the molex in question to one i know is correct, and then pop the pins in...

Good stuff.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8Z68-V Pro Crossfire HD 5870's 4x4 GB G.skill Ripjaws 
Hard DriveOSMonitorPower
WD Caviar Black 1 TB Windows 7 x64 build 7000 Syncmaster 226BW x 2 Corsair HX650 
Case
Tech station 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K Asus P8Z68-V Pro Crossfire HD 5870's 4x4 GB G.skill Ripjaws 
Hard DriveOSMonitorPower
WD Caviar Black 1 TB Windows 7 x64 build 7000 Syncmaster 226BW x 2 Corsair HX650 
Case
Tech station 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Cable sleeving noob in distress!