Overclock.net › Forums › AMD › AMD - General › Probs with finding max HTT
New Posts  All Forums:Forum Nav:

Probs with finding max HTT - Page 2

post #11 of 16
Thread Starter 
Well, problem is that there is no standard as which people use with OC-terms I'd say. I'm a n00b at this moment, but everywhere I read, is that the FSB = HTT. But that AMD doesn't work with a FSB and it's called the HTT.
HTT * HT-MP = HT-Link Frequency.
HTT * CPU-MP = CPU Frequency.

My Asus M3A32-MVP Has:
Front Side Bus (FSB, which is infact the HTT, why does Asus call it like that if it's actually not the right word for it)
CPU Mulitplier
CPU-NB - MP (which I'm lowering each time an error occurs, as explained in the guide)
CPU HT- Link Speed (Auto, or as high as 2 GHz, if CPU-MP * FSB = 2GHz)

I can set much more stuff, and the HTT link in my case can be larger than x5, up to 15x if I want to. 8x is the lowest if I can remember (will check it later).

I also read on different forum that this board can hold 380-400MHz HTT (FSB).
I OC'ed the CPU with standard values and only raised the CPU-MP to x13 @2600MHz (Black Edition). Ran a OCCT test and all went fine (Max temp is 60*C, which is in my eyes quite high). Going to set it to 13.5x and will run OCCT for another hr to c if it will pass. 14x will defenately crash the system, as I already tried that. Maybe I do need to the NB voltage liek you said?

Tnx for the help anyway Much appreciated!!
Sulaco
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K ASUS Sabertooth Z77 ASUS X290X Corsair Vengeance 2x4GB 1866MHz 9-10-9-28 
Hard DriveHard DriveCoolingCooling
1x SAMSUNG 830 128GB, 2x Samsung 1TB 32MB Samsun 840 evo Aqua computer Kyros XT Feeser Exchanger 240 
CoolingCoolingCoolingOS
Swiftech MCR320-QP Swiftech MCP 350 Swiftech MCP 350 W8.1 64 
MonitorMonitorKeyboardPower
Iiyama ProLite XB2779QS Black 27" Iiyama E480S 20" Roccat Ryos MK pro CoolerMaster 850W ESBA 
CaseMouseMouse PadAudio
NZXT Switch 810 gun metal Roccat Kone[+] CorePad XXXL Logitech G35 
  hide details  
Reply
Sulaco
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K ASUS Sabertooth Z77 ASUS X290X Corsair Vengeance 2x4GB 1866MHz 9-10-9-28 
Hard DriveHard DriveCoolingCooling
1x SAMSUNG 830 128GB, 2x Samsung 1TB 32MB Samsun 840 evo Aqua computer Kyros XT Feeser Exchanger 240 
CoolingCoolingCoolingOS
Swiftech MCR320-QP Swiftech MCP 350 Swiftech MCP 350 W8.1 64 
MonitorMonitorKeyboardPower
Iiyama ProLite XB2779QS Black 27" Iiyama E480S 20" Roccat Ryos MK pro CoolerMaster 850W ESBA 
CaseMouseMouse PadAudio
NZXT Switch 810 gun metal Roccat Kone[+] CorePad XXXL Logitech G35 
  hide details  
Reply
post #12 of 16
At a 200 FSB, every time you raise the multi you are raising the CPU speed by 200mhz. That's a pretty big jump, especially if you're on the edge of stability. At higher FSBs it's even a bigger jump.

You'd be better served by raising the FSB itself, by no more that 10 at a time, then by 5 then by 1 as you get closer to the limit.

And yes, the terminology of HT, HTT, and FSB is confusing.

Half multiplers, while perfectly functional, can lead to unexpected memory speed changes.
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
post #13 of 16
Thread Starter 
Yeah I know that raising the MP will result in a large jump of the CPU frequency. I did do some search around to c to which frequency people were able to get it running and 3Ghz was a go...
Anyway, I have a Stable 2.7GHz OCCT test, but I do want to get it up a bit higher with the Memory @ 1067 and 5-5-5-15 Timings.
I hope that'll work...

Can you advice em what to do if I raise the HTT and the system becomes instable? Cuz I don't quite understand what to raise/low in cases liek this.
Sulaco
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K ASUS Sabertooth Z77 ASUS X290X Corsair Vengeance 2x4GB 1866MHz 9-10-9-28 
Hard DriveHard DriveCoolingCooling
1x SAMSUNG 830 128GB, 2x Samsung 1TB 32MB Samsun 840 evo Aqua computer Kyros XT Feeser Exchanger 240 
CoolingCoolingCoolingOS
Swiftech MCR320-QP Swiftech MCP 350 Swiftech MCP 350 W8.1 64 
MonitorMonitorKeyboardPower
Iiyama ProLite XB2779QS Black 27" Iiyama E480S 20" Roccat Ryos MK pro CoolerMaster 850W ESBA 
CaseMouseMouse PadAudio
NZXT Switch 810 gun metal Roccat Kone[+] CorePad XXXL Logitech G35 
  hide details  
Reply
Sulaco
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K ASUS Sabertooth Z77 ASUS X290X Corsair Vengeance 2x4GB 1866MHz 9-10-9-28 
Hard DriveHard DriveCoolingCooling
1x SAMSUNG 830 128GB, 2x Samsung 1TB 32MB Samsun 840 evo Aqua computer Kyros XT Feeser Exchanger 240 
CoolingCoolingCoolingOS
Swiftech MCR320-QP Swiftech MCP 350 Swiftech MCP 350 W8.1 64 
MonitorMonitorKeyboardPower
Iiyama ProLite XB2779QS Black 27" Iiyama E480S 20" Roccat Ryos MK pro CoolerMaster 850W ESBA 
CaseMouseMouse PadAudio
NZXT Switch 810 gun metal Roccat Kone[+] CorePad XXXL Logitech G35 
  hide details  
Reply
post #14 of 16
Quote:
Originally Posted by XenoMopH View Post
Can you advice em what to do if I raise the HTT and the system becomes instable? Cuz I don't quite understand what to raise/low in cases liek this.
No, I'm not familiar with your BIOS settings.
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
FX6300 Black M5A99X EVO R2.0 Nvidia GTS450 Team Vulcan PC3 12800 
Hard DriveOptical DriveCoolingOS
Samsung 840 PRO Asus DRW-1608P (x2) Custom Water Cooling Win7 (Ult), Win 8.1 & Win Server 2012 R2 
MonitorKeyboardPowerCase
2 X Samsung 915N Ducky Shine III, Blue Cherry/Blue LEDs PCP&C 1kw Lian Li PC-71 (W/Window) 
MouseAudio
Logiteck G400s none 
  hide details  
Reply
post #15 of 16
Thread Starter 
Ok, no probs I'll figure it out some how
Sulaco
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K ASUS Sabertooth Z77 ASUS X290X Corsair Vengeance 2x4GB 1866MHz 9-10-9-28 
Hard DriveHard DriveCoolingCooling
1x SAMSUNG 830 128GB, 2x Samsung 1TB 32MB Samsun 840 evo Aqua computer Kyros XT Feeser Exchanger 240 
CoolingCoolingCoolingOS
Swiftech MCR320-QP Swiftech MCP 350 Swiftech MCP 350 W8.1 64 
MonitorMonitorKeyboardPower
Iiyama ProLite XB2779QS Black 27" Iiyama E480S 20" Roccat Ryos MK pro CoolerMaster 850W ESBA 
CaseMouseMouse PadAudio
NZXT Switch 810 gun metal Roccat Kone[+] CorePad XXXL Logitech G35 
  hide details  
Reply
Sulaco
(20 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3770K ASUS Sabertooth Z77 ASUS X290X Corsair Vengeance 2x4GB 1866MHz 9-10-9-28 
Hard DriveHard DriveCoolingCooling
1x SAMSUNG 830 128GB, 2x Samsung 1TB 32MB Samsun 840 evo Aqua computer Kyros XT Feeser Exchanger 240 
CoolingCoolingCoolingOS
Swiftech MCR320-QP Swiftech MCP 350 Swiftech MCP 350 W8.1 64 
MonitorMonitorKeyboardPower
Iiyama ProLite XB2779QS Black 27" Iiyama E480S 20" Roccat Ryos MK pro CoolerMaster 850W ESBA 
CaseMouseMouse PadAudio
NZXT Switch 810 gun metal Roccat Kone[+] CorePad XXXL Logitech G35 
  hide details  
Reply
post #16 of 16
Quote:
Originally Posted by XenoMopH View Post
Can you advice em what to do if I raise the HTT and the system becomes instable? Cuz I don't quite understand what to raise/low in cases liek this.
Xeno, typically if your OC is unstable the machine will either not POST or just lock up. If your running into instability issues then just simply restart and drop the HTT (reference clock) down a little bit. If your not able to get into the BIOS at all then you could also clear the CMOS. Clearing the cmos is mentioned in your manual. The manual should direct you to the correct jumpers on the motherboard.

Let us know if you need more help

Good luck
Workstation
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon II X4 620 Asus M4A785-M Asus 5770 G.Skill 8GB DDR2-800 
Hard DriveOSMonitorPower
WD3200AAJS Windows 7 Pro Acer AL2216W, Samsung P2770 Corsair 550VX 
Case
Tagan Black Pearl 
  hide details  
Reply
Workstation
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon II X4 620 Asus M4A785-M Asus 5770 G.Skill 8GB DDR2-800 
Hard DriveOSMonitorPower
WD3200AAJS Windows 7 Pro Acer AL2216W, Samsung P2770 Corsair 550VX 
Case
Tagan Black Pearl 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD - General
Overclock.net › Forums › AMD › AMD - General › Probs with finding max HTT