Overclock.net › Forums › Intel › Intel CPUs › Need OC help E2180 & D3SL
New Posts  All Forums:Forum Nav:

Need OC help E2180 & D3SL

post #1 of 24
Thread Starter 
Ok I need help I am new to overclocking and I have some questions.

i am trying to overclock my sig rig. I have downloaded prime 95 and core temp so far. I currently have my volts set to 1.35 and the chip at 2.6ghz with the ram on a 1:1 divider. I have ran prime 95 for about 30 min and its at like 35 celcius.

I also don't understand the way my board sets ram speed it dosen't have ratios it just has numbers(mine is the lowest 2.0)

So my question is whats the next step? I have read alot on here and I am going to leave my ram slow until i get my cpu stable. It also wont boot at 3ghz I am guessing it needs more volts.

Thanks for any help
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
post #2 of 24
2.0 is 1:1 for DS3L. Press Ctrl and F1 before you go in MI.I.T. menu if you want to set the ram timing but this is usually the last thing you want to touch.
post #3 of 24
As LinsKingdom said the SPD is what controls your ratio. For the CPU voltage try like 1.4v at see if you can boot up into windows.
My Evolution
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @ 4.2ghz 1.35v ABIT IP-35E EVGA 9800GTX+ Superclocked(800/2000/1200)SOLD 4GB GEIL DDR2 933mhz @ 5-5-5-16 
Hard DriveOptical DriveOSMonitor
Maxtor 1TB 32MB cache + WD 320GB 16MB cache Pioneer 18x SATA dvd-writer Vista HP SP1 64bit + XP Pro 32bit 17" CRT 
PowerCaseMouse
Antec Basiq 500W :-\ Cooler Master 330 Logitech mx518 
  hide details  
Reply
My Evolution
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 @ 4.2ghz 1.35v ABIT IP-35E EVGA 9800GTX+ Superclocked(800/2000/1200)SOLD 4GB GEIL DDR2 933mhz @ 5-5-5-16 
Hard DriveOptical DriveOSMonitor
Maxtor 1TB 32MB cache + WD 320GB 16MB cache Pioneer 18x SATA dvd-writer Vista HP SP1 64bit + XP Pro 32bit 17" CRT 
PowerCaseMouse
Antec Basiq 500W :-\ Cooler Master 330 Logitech mx518 
  hide details  
Reply
post #4 of 24
Thread Starter 
Im gonna try some more tonight after i read some more

thanks for the advice
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
post #5 of 24
be sure coretemp reads your TJMAX as 95C , or else you are NOT getting accurate temperature readings , i reccomend RealTemp for Intel CPU's , as it usually reads tjm accurately
Socrates
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 920 @ 3.6 Biostar TA790GX-128 XFX HD6850  8GB Kingston 
Hard DriveOptical DriveOSMonitor
OCZ RevoDrive 120GB (PCI-E) (2) DVD RW/CD RW Windows 7 Ultimate x64 3x Acer 21.5" (1920x1080) 
PowerCaseMouse
OCZ StealthXStream 600W Xigmatek Utguard Logitech MX518 
  hide details  
Reply
Socrates
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 920 @ 3.6 Biostar TA790GX-128 XFX HD6850  8GB Kingston 
Hard DriveOptical DriveOSMonitor
OCZ RevoDrive 120GB (PCI-E) (2) DVD RW/CD RW Windows 7 Ultimate x64 3x Acer 21.5" (1920x1080) 
PowerCaseMouse
OCZ StealthXStream 600W Xigmatek Utguard Logitech MX518 
  hide details  
Reply
post #6 of 24
Thread Starter 
core temp and real temp read within 1 degree of each other so I think im safe there.

I cannot get to boot at 2.8ghz. Im too impatient to go up 10 at a time
The ram is set 1:1, ram 2 volts, cpu 1.35625

all the extra intel BS is turned off.

Any suggestions?
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
post #7 of 24
bump voltage and try 1.38 , it took 1.40 for mine to hit 3
Socrates
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 920 @ 3.6 Biostar TA790GX-128 XFX HD6850  8GB Kingston 
Hard DriveOptical DriveOSMonitor
OCZ RevoDrive 120GB (PCI-E) (2) DVD RW/CD RW Windows 7 Ultimate x64 3x Acer 21.5" (1920x1080) 
PowerCaseMouse
OCZ StealthXStream 600W Xigmatek Utguard Logitech MX518 
  hide details  
Reply
Socrates
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 920 @ 3.6 Biostar TA790GX-128 XFX HD6850  8GB Kingston 
Hard DriveOptical DriveOSMonitor
OCZ RevoDrive 120GB (PCI-E) (2) DVD RW/CD RW Windows 7 Ultimate x64 3x Acer 21.5" (1920x1080) 
PowerCaseMouse
OCZ StealthXStream 600W Xigmatek Utguard Logitech MX518 
  hide details  
Reply
post #8 of 24
Thread Starter 
just bumped to 1.38 and running prime 95. Ok well as I type core 1 has failed what now?
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
post #9 of 24
try rebooting and try test again , if it happens again try 1.39 or 1.40
Socrates
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 920 @ 3.6 Biostar TA790GX-128 XFX HD6850  8GB Kingston 
Hard DriveOptical DriveOSMonitor
OCZ RevoDrive 120GB (PCI-E) (2) DVD RW/CD RW Windows 7 Ultimate x64 3x Acer 21.5" (1920x1080) 
PowerCaseMouse
OCZ StealthXStream 600W Xigmatek Utguard Logitech MX518 
  hide details  
Reply
Socrates
(13 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 920 @ 3.6 Biostar TA790GX-128 XFX HD6850  8GB Kingston 
Hard DriveOptical DriveOSMonitor
OCZ RevoDrive 120GB (PCI-E) (2) DVD RW/CD RW Windows 7 Ultimate x64 3x Acer 21.5" (1920x1080) 
PowerCaseMouse
OCZ StealthXStream 600W Xigmatek Utguard Logitech MX518 
  hide details  
Reply
post #10 of 24
Thread Starter 
Take a look at this screen shot.

Cpuz says a E4400 and there is no info under the memory tab
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
Rising Rage
(13 items)
 
  
CPUMotherboardGraphicsRAM
Athlon ll 250 @3.6ghz GA790X-DS4 3870 Crossfire 855///1225 2x2gb OCZ Platinum LV 
Hard DriveOSMonitorPower
160gb WD-slow W7 64 20" Hannspree 530w Rosewill 41a single rail 
Case
Antec 900 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need OC help E2180 & D3SL