Overclock.net › Forums › Intel › Intel Motherboards › Ocing a 780i with a Q6700?
New Posts  All Forums:Forum Nav:

Ocing a 780i with a Q6700?

post #1 of 10
Thread Starter 
I have never owned an Intel setup before, so how do I do it? I tried to set the fsb at 300, but it would not post. Here are the voltages.

Cpu Core-1.4
Cpu Fsb-1.3
Memory-2.2 (OCZ SLI)
nforce SPP-1.4
nforce MCP-1.525
HT nforce SPP<->MCP=1.25

Also what should I set cpu,ht,pcie, and sata spread spectrum at? Should the HPET function be enabled? HT multiplier set at what? System bios cacheable?

Any help would be much appreciated. I can oc an AMD system with no problem. Just need some help. Would like to get to 3.8. My temps are averaging 28c at idle and 45c load on orthos.
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
post #2 of 10
all spectrum disabled, HPET, C1E disable. ur quad is at 3.8 ghz? with 45 load? or is it under stock speed right now?
Xtasy's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.8 ghz // 1.46 vCore 24/7 Evga nForce 780i SLI w/ PencilMod BFG GTX260 4GB Dominator's @ 4/4/4/8-1T, 1066mhz. 
Hard DriveOSMonitorKeyboard
Seagate 300GB// Sata 3.0 [Raptor X on the way!] Window XP SP2 32Bit [64bit soon!] 21.6' Samsung 216BW G11 
PowerCaseMouseMouse Pad
700W OCZ XSTREAM Antec 900 G5 Beachside 
  hide details  
Reply
Xtasy's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.8 ghz // 1.46 vCore 24/7 Evga nForce 780i SLI w/ PencilMod BFG GTX260 4GB Dominator's @ 4/4/4/8-1T, 1066mhz. 
Hard DriveOSMonitorKeyboard
Seagate 300GB// Sata 3.0 [Raptor X on the way!] Window XP SP2 32Bit [64bit soon!] 21.6' Samsung 216BW G11 
PowerCaseMouseMouse Pad
700W OCZ XSTREAM Antec 900 G5 Beachside 
  hide details  
Reply
post #3 of 10
Thread Starter 
It is at stock.
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
post #4 of 10
Quote:
Originally Posted by kenny1064 View Post
It is at stock.
Okay well, heres what i have right now.

CPU : 1.46v (my vid is 1.2875, use CoreTemp to check what's yours]
FSB: 1.4v
Memory: 2.1v (set it to your ram voltage)
SPP 1.45v
MCP: 1.550v
HT: 1.3v

CPU/RAM = Linked/Synced
Multiplier at 10x [IFYOUWANT3.8ghz!!]
Bus speed at 380 mhz or [1520FSB]


If you want ur system to be prime stable at 3.8 ghz, you'll probably need 1.50 ghz or more.

BTW. your motherboard is same as mine, there is HORRIBLE Vdroop for this motherboard, i suggest you do a pencil mod to it, if you want to keep ur bios voltage under 1.5v.

Okay heres an example of what's Vdroop..
My Core voltage at 1.5v, but when i get to desktop.. i only get 1.44 instead of 1.5

After pencil mod, [under bios 1.46v] on desktop 1.45... my Vdroop is only
0.01 instead of previous 0.06.


Pencil mod is very easy.. if you're thinking about pencil mod.. because u dont want 1.55 under bios, tell me.. ill try to dig it up from my previous question about how to pencil mod.
Xtasy's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.8 ghz // 1.46 vCore 24/7 Evga nForce 780i SLI w/ PencilMod BFG GTX260 4GB Dominator's @ 4/4/4/8-1T, 1066mhz. 
Hard DriveOSMonitorKeyboard
Seagate 300GB// Sata 3.0 [Raptor X on the way!] Window XP SP2 32Bit [64bit soon!] 21.6' Samsung 216BW G11 
PowerCaseMouseMouse Pad
700W OCZ XSTREAM Antec 900 G5 Beachside 
  hide details  
Reply
Xtasy's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.8 ghz // 1.46 vCore 24/7 Evga nForce 780i SLI w/ PencilMod BFG GTX260 4GB Dominator's @ 4/4/4/8-1T, 1066mhz. 
Hard DriveOSMonitorKeyboard
Seagate 300GB// Sata 3.0 [Raptor X on the way!] Window XP SP2 32Bit [64bit soon!] 21.6' Samsung 216BW G11 
PowerCaseMouseMouse Pad
700W OCZ XSTREAM Antec 900 G5 Beachside 
  hide details  
Reply
post #5 of 10
Thread Starter 
Thanks for the info. I'll give it a try. I already did the pencil mod as well. rep+
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
post #6 of 10
Thread Starter 
It would post with those settings at 3.8. Only problem is that it would lock up after a few seconds. I unlinked the mem and set it at 800, then set the bus at 1440. Now it seems to run at 3.6 fine. Just have to stress it to see. By the way I tried to run orthos and it only did two cores. Tried to run another at the same time, but it still didn't get the other two. What do I do? Orthos is what I like to use.

http://service.futuremark.com/compare?3dm06=6840123, best 3dmark I ever had.
Edited by kenny1064 - 5/23/08 at 6:56pm
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
post #7 of 10
Quote:
Originally Posted by kenny1064 View Post
It would post with those settings at 3.8. Only problem is that it would lock up after a few seconds. I unlinked the mem and set it at 800, then set the bus at 1440. Now it seems to run at 3.6 fine. Just have to stress it to see. By the way I tried to run orthos and it only did two cores. Tried to run another at the same time, but it still didn't get the other two. What do I do? Orthos is what I like to use.

http://service.futuremark.com/compare?3dm06=6840123, best 3dmark I ever had.
Don't use Orthos, use prime95; SmallFFTs test;

What ur VID# on your Q6700? also what voltage did you use while ur Q6700 is at 3.8ghz?

You can try 1.48 voltage.. btw.. at 1.46 volt, for my Q6700, it's not stress stable, it's gaming/encoding stable. that's all i need anyway (: i don't get BSOD or some kind of unstability issue.

Also on top of that, see if you have the latest BIOs for your motherboard, i get random BSOD with the previous driver, after updating my driver, i don't get anymore BSOD's
Edited by xtacized - 5/23/08 at 7:09pm
Xtasy's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.8 ghz // 1.46 vCore 24/7 Evga nForce 780i SLI w/ PencilMod BFG GTX260 4GB Dominator's @ 4/4/4/8-1T, 1066mhz. 
Hard DriveOSMonitorKeyboard
Seagate 300GB// Sata 3.0 [Raptor X on the way!] Window XP SP2 32Bit [64bit soon!] 21.6' Samsung 216BW G11 
PowerCaseMouseMouse Pad
700W OCZ XSTREAM Antec 900 G5 Beachside 
  hide details  
Reply
Xtasy's System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 @ 3.8 ghz // 1.46 vCore 24/7 Evga nForce 780i SLI w/ PencilMod BFG GTX260 4GB Dominator's @ 4/4/4/8-1T, 1066mhz. 
Hard DriveOSMonitorKeyboard
Seagate 300GB// Sata 3.0 [Raptor X on the way!] Window XP SP2 32Bit [64bit soon!] 21.6' Samsung 216BW G11 
PowerCaseMouseMouse Pad
700W OCZ XSTREAM Antec 900 G5 Beachside 
  hide details  
Reply
post #8 of 10
check the EVGA 780i guide in my sig below. It applies to the XFX model as well.
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 6800K Asus X99-A II Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Quad  
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Corsair H100i V2 - w/ML120 Pro Fans Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Steelseries Merc  EVGA Supernova G2 1000W Corsair 450D Mionix Naos 8200 
Mouse PadAudioAudioOther
Inwin Batmat Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
Murder Box II
(18 items)
 
Home PC
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel 6800K Asus X99-A II Zotac 1080Ti AMP Extreme Edition G. Skill Trident Z - 32GB/ 3200Hz/CL14/Quad  
Hard DriveCoolingOSMonitor
Sandisk Extreme Pro 480GB Corsair H100i V2 - w/ML120 Pro Fans Windows 10 Home 64 Bit Acer Z35P 1440P G-Sync 
KeyboardPowerCaseMouse
Steelseries Merc  EVGA Supernova G2 1000W Corsair 450D Mionix Naos 8200 
Mouse PadAudioAudioOther
Inwin Batmat Aluminum Sound Blaster Z Logitech Z906 - 5.1 Maxnomic Commander S-III Gaming Chair 
CPUMotherboardGraphicsRAM
Intel G3440 Asus B85M-E/CSM EVGA GTX 950 Patriot Viper 3 - 2x8GB 1600hz 
Hard DriveOptical DriveCoolingOS
Samsung EVO 850 - 500GB + 4TB/3TB x 2/2TB WD Green LG CH12LS28 Bluray Scythe Big Shuriken 2 w/Corsair SP120 Fan Windows 10 64 Bit 
MonitorKeyboardPowerCase
Samsung 75" TV.... GooBang Doo MX3 Corsair CX430 V2 NMEDIAPC HTPC 6000B w/ Pro LCD Module 
Mouse
GooBang Doo MX3 
  hide details  
Reply
post #9 of 10
Thread Starter 
My vid 1.3250 cpu at 1.4625 in bios. I downloaded the new drivers from nvidia.
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
Old Trusty:)
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6700@3.75 lapped XFX 780i w/ pencil mod Sapphire ATI HD5850 Ocz Sli 8gb ddr2@900mhz 
Hard DriveOSMonitorKeyboard
WD FAEX 1TB, SG 250GB Win 7 Pro 64 bit Samsung Syncmaster 2232bw Creative Fatality 
PowerCaseMouseMouse Pad
Pc Power&Cooling 610 Silencer Antec 900 5 fans Razer Deathadder Razer Mantis control 
Audio
HT Omega Claro XT 
  hide details  
Reply
post #10 of 10
http://service.futuremark.com/home.a...50E9E3CDA88D94


Thankx a lot for your post.Was getting no where.Flashed to P04.Did just like you said 3.8 easy.Rep to you.Want 4.0 though.
Black Ice WC III
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 lapped 4.0oc Asus Rampage Formula x48 1x4870 790 core 8gb 4x2gb Corsair Dominator 
Hard DriveOptical DriveOSMonitor
500gb Seagate 7200rpm 16mb HP 940 dvd Win7pro64bit HP LP3065c 30 inch 
KeyboardPowerCaseMouse
Microsoft Razer Reclusa TX750w Corsair TV dinner tray tan Razer Coperhead 
  hide details  
Reply
Black Ice WC III
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6700 lapped 4.0oc Asus Rampage Formula x48 1x4870 790 core 8gb 4x2gb Corsair Dominator 
Hard DriveOptical DriveOSMonitor
500gb Seagate 7200rpm 16mb HP 940 dvd Win7pro64bit HP LP3065c 30 inch 
KeyboardPowerCaseMouse
Microsoft Razer Reclusa TX750w Corsair TV dinner tray tan Razer Coperhead 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Ocing a 780i with a Q6700?