Jessie's Gumdrop - Day 03
Today was a late start, and a bit of an ass-dragger so I didnt get too much done. I walked over to the HW store to find that they were closed
So I decided to make due with what I had which was basically a mouse sander and a couple of 240 grit pads. First I prepared to scuff up the beige painted parts... (chasis top)
thats my "boat motor" thing that I use to blow off dust. Actually its an air pump to inflate an air-matress. Works a charm to dedust (pun) pc's and etc.
then I went to town on the innards
after some scuffing with 240. Did I go crazy? Anyway I still need to get in there with hands when I get some proper sand paper. Yes I will be using etching primer
I decided to mark off some tentative plans for the case window cut, while sipping a few beers and listening to Stone Temple Pilots...
ok I was bored...
Well that was it for today. Thanks for reading. More updates soon
* This Worklog post was generated using WorklogCreator - Version: 220.127.116.11
* Free Download: http://www.mod2software.com/worklogc...logcreator.zipEdited by CattleRustler - 5/27/08 at 3:58pm