Overclock.net › Forums › Intel › Intel CPUs › Need some help OCing Q6600
New Posts  All Forums:Forum Nav:

Need some help OCing Q6600 - Page 2

post #11 of 25
Thread Starter 
Quote:
Originally Posted by MosIncredible View Post
Good. It's easier to tell what needs more voltage when you only up 1 at a time. I'll bump up a voltage, if I get the same result, pull it back down, and up/change something else.
Right...work thread 4 failed this time 8 minutes in. Going to bump down NB and up the RAM to 2.1, hopefully this gives some better results.
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
post #12 of 25
What's your VTT? and GTL ref?
Audio Laptop
(7 items)
 
  
CPUGraphicsRAMHard Drive
i7 4720HQ GTX 970M 16GB Micron m600 512GB mSATA SSD 
Hard DriveOSAudio
WD 750GB Windows 10 Audient iD14 
  hide details  
Reply
Audio Laptop
(7 items)
 
  
CPUGraphicsRAMHard Drive
i7 4720HQ GTX 970M 16GB Micron m600 512GB mSATA SSD 
Hard DriveOSAudio
WD 750GB Windows 10 Audient iD14 
  hide details  
Reply
post #13 of 25
Thread Starter 
Quote:
Originally Posted by MosIncredible View Post
What's your VTT? and GTL ref?
VTT is default...1.200 i think?
And I haven't touched the GTL at all

2.1 v on the RAM and work thread 2 failed in 1 minute

I'm lost on ideas now....up my Vcore more? It dips down to 1.36 under load, try upping it a notch to 1.46?
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
post #14 of 25
Give it some more VTT. Try 1.31v area first. Forgot what setting I actually used in bios but it reads 1.31v in SmartGuardian
Audio Laptop
(7 items)
 
  
CPUGraphicsRAMHard Drive
i7 4720HQ GTX 970M 16GB Micron m600 512GB mSATA SSD 
Hard DriveOSAudio
WD 750GB Windows 10 Audient iD14 
  hide details  
Reply
Audio Laptop
(7 items)
 
  
CPUGraphicsRAMHard Drive
i7 4720HQ GTX 970M 16GB Micron m600 512GB mSATA SSD 
Hard DriveOSAudio
WD 750GB Windows 10 Audient iD14 
  hide details  
Reply
post #15 of 25
Thread Starter 
Okay, upped the VTT 2 or so notches to 1.31v running prime 95 now.

I checked and my GTL is as follows
CPU GTL 0/2 = .67x
CPU GTL 1/3 = .67x
NB GTL = .67x

EDIT** Prime 95 work thread 4 failed in 3 minutes
Edited by R2D2 - 5/24/08 at 7:41pm
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
post #16 of 25
Try one or both of you CPU GTL's at .63x
Upgrade
(13 items)
 
For Sale: For Sale: Single Stage Phase Change
$300 (USD) or best offer
 
CPUMotherboardGraphicsRAM
7600K Gigabyte Z270P-D3-CF Nvidia GTX 1060 6GB Ballistix Elite 8GB Kit (4GBx2) DDR4 3000 MT/s 
CoolingOSMonitorKeyboard
Custom Loop|360 Rad w/3x H1011|D5Vario|Custom M... Win10 Pro PX2710MW G510 
PowerCaseMouseMouse Pad
Seasonic SSR-650RM DangerDen Torture Rack G500 Big! 
Audio
ASUS Xonar DX 
  hide details  
Reply
Upgrade
(13 items)
 
For Sale: For Sale: Single Stage Phase Change
$300 (USD) or best offer
 
CPUMotherboardGraphicsRAM
7600K Gigabyte Z270P-D3-CF Nvidia GTX 1060 6GB Ballistix Elite 8GB Kit (4GBx2) DDR4 3000 MT/s 
CoolingOSMonitorKeyboard
Custom Loop|360 Rad w/3x H1011|D5Vario|Custom M... Win10 Pro PX2710MW G510 
PowerCaseMouseMouse Pad
Seasonic SSR-650RM DangerDen Torture Rack G500 Big! 
Audio
ASUS Xonar DX 
  hide details  
Reply
post #17 of 25
Thread Starter 
Quote:
Originally Posted by TheCh3F View Post
Try one or both of you CPU GTL's at .63x
Okay...I left my VTT at 1.31v, should I have dropped that down or is it fine?

I changed both of my CPU GTL's to .63x

If I may ask, what exactly are VTT and GTL's?
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
post #18 of 25
This page may help you understand a little more or confuse you more

http://www.edgeofstability.com/artic.../gtl/gtl1.html
Audio Laptop
(7 items)
 
  
CPUGraphicsRAMHard Drive
i7 4720HQ GTX 970M 16GB Micron m600 512GB mSATA SSD 
Hard DriveOSAudio
WD 750GB Windows 10 Audient iD14 
  hide details  
Reply
Audio Laptop
(7 items)
 
  
CPUGraphicsRAMHard Drive
i7 4720HQ GTX 970M 16GB Micron m600 512GB mSATA SSD 
Hard DriveOSAudio
WD 750GB Windows 10 Audient iD14 
  hide details  
Reply
post #19 of 25
Thread Starter 
Work thread #2 failed 5 minutes in with these settings.

1.45vcore
1.37NB
2.0v RAM

Both CPU GTL's at .63x
NB GTL REF at .67x

378x9
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
Maximus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 (G0) @ 3.0ghz DFI LP DK P35 8800GTS 512mb KO Edition 2x2Gig G.Skill DDR PC 8000 
Hard DriveOSMonitorPower
320gig WD 7200RPM Windows 8 Pro 22" Samsung Corsair TX650w 
Case
Antec 900 
  hide details  
Reply
post #20 of 25
theses are settings from a Asus Rampage board - but try them anyhow as much as you can [they are for 3.6ghz]

Extreme Tweaker
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : 9
- Ratio CMOS Setting :
FSB Frequency : 400
FSB Strap to North Bridge :400
PCI-E Frequency: 100
DRAM Frequency: DDR2-800
DRAM Command Rate : 2T
DRAM Timing Control: Manual
CAS# Latency : 4
RAS# to CAS# Delay : 4
RAS# Precharge : 4
RAS# ActivateTime : 12
RAS# to RAS# Delay : auto
Row Refresh Cycle Time : auto
Write Recovery Time : auto
Read to Precharge Time : auto

Read to Write Delay (S/D) : auto
Write to Read Delay (S) : auto
Write to Read Delay (D) : auto
Read to Read Delay (S) : auto
Read to Read Delay (D) : auto
Write to Write Delay (S) : auto
Write to Write Delay (D) : auto
DRAM Static Read Control: disabled
Ai Clock Twister : auto
Transaction Booster : disabled
Relax Level : 0
CPU Voltage : 1.44375
CPU PLL Voltage : 1.56
North Bridge Voltage : 1.51
DRAM Voltage : 2.08
FSB Termination Voltage : 1.40
South Bridge Voltage : 1.150
Loadline Calibration : enabled
CPU GTL Reference : .63x
North Bridge GTL Reference : .67x
DDR2 Channel A REF Voltage : auto
DDR2 Channel B REF Voltage : auto
DDR2 Controller REF Voltage : auto
SB 1.5V Voltage : 1.55

NB LED Selection : NB Volt
SB LED Selection : SB Volt
CPU LED Selection : CPU VOlt
Voltiminder LED : disabled

CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled

Advanced CPU Configuration
CPU Ratio Control : Manual
- Ratio CMOS Setting :
C1E Suppport : Disabled
CPU TM Function : Disabled
Vanderpool Technology : Disabled
Execute Disable Bit : Disabled
Max CPUID Value Limit : Disabled


USB Configuration
USB Functions: Enabled
Legacy USB Support : Disabled
My System
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4771 GA-Z87X-UD3H 2*HD5850 4gb G.Skill Ripjaw + 8gb Corsair XMS3 1600 cl8 
Hard DriveOSMonitorKeyboard
Samsung 840 Pro 256gb | 3*3TB Raid 5 | Corsair F60 Windows 8 x64 *EYEFINITY* Dell 2405FPW + 2*E248WFP Logitech Illuminated 
PowerCaseMouseAudio
Corsair HX-850v2 Lian Li v2010b M$ Basic  Asus Xonar D2X 
AudioAudio
Swan D1080 MK II 08  Shure SRH-440 
  hide details  
Reply
My System
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4771 GA-Z87X-UD3H 2*HD5850 4gb G.Skill Ripjaw + 8gb Corsair XMS3 1600 cl8 
Hard DriveOSMonitorKeyboard
Samsung 840 Pro 256gb | 3*3TB Raid 5 | Corsair F60 Windows 8 x64 *EYEFINITY* Dell 2405FPW + 2*E248WFP Logitech Illuminated 
PowerCaseMouseAudio
Corsair HX-850v2 Lian Li v2010b M$ Basic  Asus Xonar D2X 
AudioAudio
Swan D1080 MK II 08  Shure SRH-440 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Need some help OCing Q6600