Overclock.net › Forums › Intel › Intel Motherboards › Need help with P5N32 e sli plus - Vcore adjustment
New Posts  All Forums:Forum Nav:

Need help with P5N32 e sli plus - Vcore adjustment

post #1 of 4
Thread Starter 
Hi guys i have ask around alot lately but their is no correct answer.

I am using the E6750

I have Oced it up to 3.4 - 3.6 - 3.8 stable with Orthos and Prime for 10Hours. But the only problem that i am confused is my Vcore report.

Well it read at 1.28 when my chip is at default of 2.66. But pop up and stay 1.47 no matter how high i OC the chip.

Note: I can adjust Vcore when my the chip is at default. But not when i OC it even to 3.00GHZ

Thats mean: at 3.4, 3.6 and 3.8 Cpuz and Bios report my Vcore at 1.47 ? And i can not lower the volt in BIOS. I set vcore at 1.375 (which is what my friend has test and using for his E6750) and F10 restart go in bios again, my setting was keep at 1.375 in the Overvoltage section but still read at 1.47 in Power section and CPUz!!! so what is going on there?
My bios version is 0501 ( this is what CPUz showing )

Is this a problem of the board (/bios)? or is there anything i can turn off to adjust the vcore?

Thanks
Edited by Modfreak - 5/25/08 at 8:23am
BERSERK
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3210 [In Training] P5Q-Pro + Bios 1306 Kett's Mod HIS 4870 @ 820/1000 4GB kit OCZ ReaperX PC8000 
Hard DriveOSMonitorKeyboard
160GB samsung Vista Ultimate 64-bit Samsung 931BW - 19"W Coming soon 
PowerCaseMouseMouse Pad
Cooler Master I-Green 500W Antec 900 (pre-mod) Razer Lachesis Coming soon 
  hide details  
Reply
BERSERK
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3210 [In Training] P5Q-Pro + Bios 1306 Kett's Mod HIS 4870 @ 820/1000 4GB kit OCZ ReaperX PC8000 
Hard DriveOSMonitorKeyboard
160GB samsung Vista Ultimate 64-bit Samsung 931BW - 19"W Coming soon 
PowerCaseMouseMouse Pad
Cooler Master I-Green 500W Antec 900 (pre-mod) Razer Lachesis Coming soon 
  hide details  
Reply
post #2 of 4
Thread Starter 
PLease some one help me....... My core is so hot. idle at 3.6GHZ is 44 degrees, and full load is 68~69 degrees. My friends told me by lower the vcore i could reduce the heat to 37~38 idle and 64 at full load
BERSERK
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3210 [In Training] P5Q-Pro + Bios 1306 Kett's Mod HIS 4870 @ 820/1000 4GB kit OCZ ReaperX PC8000 
Hard DriveOSMonitorKeyboard
160GB samsung Vista Ultimate 64-bit Samsung 931BW - 19"W Coming soon 
PowerCaseMouseMouse Pad
Cooler Master I-Green 500W Antec 900 (pre-mod) Razer Lachesis Coming soon 
  hide details  
Reply
BERSERK
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3210 [In Training] P5Q-Pro + Bios 1306 Kett's Mod HIS 4870 @ 820/1000 4GB kit OCZ ReaperX PC8000 
Hard DriveOSMonitorKeyboard
160GB samsung Vista Ultimate 64-bit Samsung 931BW - 19"W Coming soon 
PowerCaseMouseMouse Pad
Cooler Master I-Green 500W Antec 900 (pre-mod) Razer Lachesis Coming soon 
  hide details  
Reply
post #3 of 4
try other software or newwer version of cpuz? i had a version that told me i had 1.223v vcore when i went above 1.4v (set in bios on my oldere set up) but everest, speedfan and hwmonitor could read it right.

if you want help with bios setting try this thread. they will be the best people to ask or the asus forums to see if another bios revision has the options enabled.
still frags n00bs
(13 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87 oc msi 290x gamer #996997 
Hard DriveCoolingOSMonitor
sandisk extreme 120 xspc raystorm winver 6.1 64 u QX2710LED 
KeyboardPowerMouse
knock off cherry reds 600w enermax volos 
  hide details  
Reply
still frags n00bs
(13 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87 oc msi 290x gamer #996997 
Hard DriveCoolingOSMonitor
sandisk extreme 120 xspc raystorm winver 6.1 64 u QX2710LED 
KeyboardPowerMouse
knock off cherry reds 600w enermax volos 
  hide details  
Reply
post #4 of 4
Thread Starter 
Quote:
Originally Posted by marsey99 View Post
try other software or newwer version of cpuz? i had a version that told me i had 1.223v vcore when i went above 1.4v (set in bios on my oldere set up) but everest, speedfan and hwmonitor could read it right.

if you want help with bios setting try this thread. they will be the best people to ask or the asus forums to see if another bios revision has the options enabled.
Thanks man. finally some leads
BERSERK
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3210 [In Training] P5Q-Pro + Bios 1306 Kett's Mod HIS 4870 @ 820/1000 4GB kit OCZ ReaperX PC8000 
Hard DriveOSMonitorKeyboard
160GB samsung Vista Ultimate 64-bit Samsung 931BW - 19"W Coming soon 
PowerCaseMouseMouse Pad
Cooler Master I-Green 500W Antec 900 (pre-mod) Razer Lachesis Coming soon 
  hide details  
Reply
BERSERK
(13 items)
 
  
CPUMotherboardGraphicsRAM
X3210 [In Training] P5Q-Pro + Bios 1306 Kett's Mod HIS 4870 @ 820/1000 4GB kit OCZ ReaperX PC8000 
Hard DriveOSMonitorKeyboard
160GB samsung Vista Ultimate 64-bit Samsung 931BW - 19"W Coming soon 
PowerCaseMouseMouse Pad
Cooler Master I-Green 500W Antec 900 (pre-mod) Razer Lachesis Coming soon 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Need help with P5N32 e sli plus - Vcore adjustment