Overclock.net › Forums › Intel › Intel CPUs › E1200 @ 2.96ghz going good, then BSOD!
New Posts  All Forums:Forum Nav:

E1200 @ 2.96ghz going good, then BSOD!

post #1 of 12
Thread Starter 
Ok, I ripped my old P4 apart and tried to build the cheapest possible upgrade that would perform decently (just for fun, I'll probably get an E4600 next time I see one for $99 and dump this E1200) I got the EVGA 650i and Celeron E1200 DC for $59 after paypal discount & rebates on COMPUSA.COM (lol!) along with some OCZ memory for $59 after rebates.

EVGA 650i + E1200 + Artic Freezer 7 + AS5 @ 2.96ghz - 1.4 VCore
OCZ 2x2GB PC26400 @ 967mhz 5-5-5-18 - 2.0 volts
OCZ StealthXTreme 600 Watt Power Supply
Gigabyte 8800GT 512MB + Zalman + (STOCK SPEEDS FOR NOW)
FSB +0.1 Volts
2 x WD Raptor 36GB 10k SATA - RAID 0 Stripe
Vista Ultimate 64-Bit SP1

This thing ran for hours on Orthos no problem. Temps never broke 46 C. The north bridge was a little hot, but I could hold my finger on it for 5+ seconds before I cried. The drives were room temp. Case air was room temp. Power Supply was very slightly over room temp under load.

First of all, no matter what I set my VCore, Memory, linked/unlinked, FSB volts, other volts, etc. I simply cannot get past 2.96ghz.

Second, I was fairly satisfied for a nights work and I decided to install the included NW2 CD just for fun. It installed 100% and had a Finish button. I click the Finish button, BSOD, reboot, cannot boot Vista. Insert Vista CD, recovery, no operating systems found on the array.

LOL!! Good times...........

Any recommendations before I start ROUND 2?
Primary Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4.5ghz Biostar Z68 HD6870 1GB @ 925/1125 RipJaw 8GB DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
AData 64GB Sandforce SSD Lite-On DVD+RW Windows 7 x64 Ultimate 32" 1080p LCD Monitor 
KeyboardPowerCaseMouse
Razer Lycosa Antec Earthwatts 750 Modular HAF 932 Razer Naga 
  hide details  
Reply
Primary Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4.5ghz Biostar Z68 HD6870 1GB @ 925/1125 RipJaw 8GB DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
AData 64GB Sandforce SSD Lite-On DVD+RW Windows 7 x64 Ultimate 32" 1080p LCD Monitor 
KeyboardPowerCaseMouse
Razer Lycosa Antec Earthwatts 750 Modular HAF 932 Razer Naga 
  hide details  
Reply
post #2 of 12
Don't bother with RAID untill you know your setup is 100% stable. It's very easy to corrupt a raid array.

More NB cooling and volts may help.
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.2/3.5GHz core/uncore, 1.175/1.15v Gigabyte X99 SOC Champion (F22n) Gigabyte AORUS GTX 1080 Ti (F3P) @ 2025/1485, 1... 4x4GiB Crucial @ 2667, 12-12-12-28-T1, 1.34v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.06) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Noctua NH-D15 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Sapphire Fury Nitro OC+ @ 1053/500, 1.225vGPU/1... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
Primary
(15 items)
 
Secondary
(13 items)
 
In progress
(10 items)
 
CPUMotherboardGraphicsRAM
5820K @ 4.2/3.5GHz core/uncore, 1.175/1.15v Gigabyte X99 SOC Champion (F22n) Gigabyte AORUS GTX 1080 Ti (F3P) @ 2025/1485, 1... 4x4GiB Crucial @ 2667, 12-12-12-28-T1, 1.34v 
Hard DriveHard DriveHard DriveCooling
Plextor M6e 128GB (fw 1.06) M.2 (PCI-E 2.0 2x) 2x Crucial M4 256GB 4x WD Scorpio Black 500GB Noctua NH-D15 
OSMonitorKeyboardPower
Windows 7 Professional x64 SP1 BenQ BL3200PT Filco Majestouch Tenkeyless (MX Brown) Corsair RM1000x 
CaseMouseAudio
Fractal Design Define R4 Logitech G402 Realtek ALC1150 + M-Audio AV40 
CPUMotherboardGraphicsRAM
X5670 @ 4.4/3.2GHz core/uncore, 1.36 vcore, 1.2... Gigabyte X58A-UD5 r2.0 w/FF3mod10 BIOS Sapphire Fury Nitro OC+ @ 1053/500, 1.225vGPU/1... 2x Samsung MV-3V4G3D/US @ 2000, 10-11-11-30-T1,... 
RAMHard DriveHard DriveHard Drive
1x Crucial BLT4G3D1608ET3LX0 @ 2000, 10-11-11-3... OCZ (Toshiba) Trion 150 120GB Hyundai Sapphire 120GB 3x Hitachi Deskstar 7k1000.C 1TB 
CoolingOSPowerCase
Noctua NH-D14 Windows 7 Pro x64 SP1 Antec TP-750 Fractal Design R5 
Audio
ASUS Xonar DS 
CPUMotherboardGraphicsRAM
i7-6800K @ 4.3/3.5GHz core/uncore, 1.36/1.2v ASRock X99 OC Formula (P3.10) GTX 780 (temporary) 4x4GiB Crucial DDR4-2400 @ 11-13-12-28-T2, 1.33v 
Hard DriveHard DriveCoolingOS
Intel 600p 256GB NVMe 2x HGST Travelstar 7k1000 1TB Corsair H55 (temporary) Windows Server 2016 Datacenter 
PowerCase
Seasonic SS-860XP2 Corsair Carbide Air 540 
  hide details  
Reply
post #3 of 12
Thread Starter 
Quote:
Originally Posted by Blameless View Post
Don't bother with RAID untill you know your setup is 100% stable. It's very easy to corrupt a raid array.

More NB cooling and volts may help.
I guess I'm used to dedicated RAID controllers in servers where I never have a problem losing the arrays... I was thinking about mounting a P3 fan on my NB heatsink? Think this would be a viable solution? (I have one in the closet, and I estimate the NB temps on TOP of the heatsink at 60-62 C based on how long I can hold my finger on it)

Do you find it a little funny that the system was basically DOING NOTHING and sitting idle when I BSOD'ed it?
Primary Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4.5ghz Biostar Z68 HD6870 1GB @ 925/1125 RipJaw 8GB DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
AData 64GB Sandforce SSD Lite-On DVD+RW Windows 7 x64 Ultimate 32" 1080p LCD Monitor 
KeyboardPowerCaseMouse
Razer Lycosa Antec Earthwatts 750 Modular HAF 932 Razer Naga 
  hide details  
Reply
Primary Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4.5ghz Biostar Z68 HD6870 1GB @ 925/1125 RipJaw 8GB DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
AData 64GB Sandforce SSD Lite-On DVD+RW Windows 7 x64 Ultimate 32" 1080p LCD Monitor 
KeyboardPowerCaseMouse
Razer Lycosa Antec Earthwatts 750 Modular HAF 932 Razer Naga 
  hide details  
Reply
post #4 of 12
Dont bother with a E4600...get an E7200 or E2200
post #5 of 12
Quote:
Originally Posted by LiquidKaos View Post
I guess I'm used to dedicated RAID controllers in servers where I never have a problem losing the arrays... I was thinking about mounting a P3 fan on my NB heatsink? Think this would be a viable solution? (I have one in the closet, and I estimate the NB temps on TOP of the heatsink at 60-62 C based on how long I can hold my finger on it)

Do you find it a little funny that the system was basically DOING NOTHING and sitting idle when I BSOD'ed it?
Did you run in raid when your system wasn't overclocked? Could be a vista issue maybe?
     
CPUMotherboardGraphicsGraphics
3570K Gigabyte Z77X-UD4H EVGA FTW 660ti 2GB ASUS 660ti 2GB 
RAMHard DriveCoolingOS
Geil  SanDisk Extream Intel BXTS13X  Windows 10 64bit 
MonitorMonitorMonitorKeyboard
Acer H6 H276HLbmid Black 27"  eMachines E233Hbd Black 23" eMachines E233Hbd Black 23" Razor Black Widow Mech 
PowerCaseMouseMouse Pad
Rosewill Capstone 650w CM Storm Enfocer  Zowie ZA11 Corsair Gaming Pad 12x12" 
  hide details  
Reply
     
CPUMotherboardGraphicsGraphics
3570K Gigabyte Z77X-UD4H EVGA FTW 660ti 2GB ASUS 660ti 2GB 
RAMHard DriveCoolingOS
Geil  SanDisk Extream Intel BXTS13X  Windows 10 64bit 
MonitorMonitorMonitorKeyboard
Acer H6 H276HLbmid Black 27"  eMachines E233Hbd Black 23" eMachines E233Hbd Black 23" Razor Black Widow Mech 
PowerCaseMouseMouse Pad
Rosewill Capstone 650w CM Storm Enfocer  Zowie ZA11 Corsair Gaming Pad 12x12" 
  hide details  
Reply
post #6 of 12
1.45v on vcore and let see
what is your batch code

mine can do 3Ghz stock vcore
post #7 of 12
Thread Starter 
Quote:
Originally Posted by khurios2000 View Post
1.45v on vcore and let see
what is your batch code

mine can do 3Ghz stock vcore
Hmm, I don't have the batch code right now, but I can tell you that 3ghz @ 1.55 volts will BARELY POST!!!!!!
Primary Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4.5ghz Biostar Z68 HD6870 1GB @ 925/1125 RipJaw 8GB DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
AData 64GB Sandforce SSD Lite-On DVD+RW Windows 7 x64 Ultimate 32" 1080p LCD Monitor 
KeyboardPowerCaseMouse
Razer Lycosa Antec Earthwatts 750 Modular HAF 932 Razer Naga 
  hide details  
Reply
Primary Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4.5ghz Biostar Z68 HD6870 1GB @ 925/1125 RipJaw 8GB DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
AData 64GB Sandforce SSD Lite-On DVD+RW Windows 7 x64 Ultimate 32" 1080p LCD Monitor 
KeyboardPowerCaseMouse
Razer Lycosa Antec Earthwatts 750 Modular HAF 932 Razer Naga 
  hide details  
Reply
post #8 of 12
Some of them wall. Mine is walled at 3.0ghz, not 1 fsb more. You can't really expect more out of a 50 dollar chip.
FX Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8320e Gigabyte GA-970A-UD3P Sapphire R9 380 4GB 2x8GB Crucial Ballistix DDR3-1600 
Hard DriveHard DriveOptical DriveCooling
Intel 240GB SSD HGST 4TB Storage DVD-RW Cooler Master Hyper 212 EVO 
OSMonitorPowerCase
Windows 7 x64 AOC 27" 1080p Corsair CX750m Corsair 200R 
Audio
Asus Xonar DS 
  hide details  
Reply
FX Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-8320e Gigabyte GA-970A-UD3P Sapphire R9 380 4GB 2x8GB Crucial Ballistix DDR3-1600 
Hard DriveHard DriveOptical DriveCooling
Intel 240GB SSD HGST 4TB Storage DVD-RW Cooler Master Hyper 212 EVO 
OSMonitorPowerCase
Windows 7 x64 AOC 27" 1080p Corsair CX750m Corsair 200R 
Audio
Asus Xonar DS 
  hide details  
Reply
post #9 of 12
Thread Starter 
Quote:
Originally Posted by Retrospekt View Post
Some of them wall. Mine is walled at 3.0ghz, not 1 fsb more. You can't really expect more out of a 50 dollar chip.
Yeah, I paid $0.00 for this one.

But I can't believe I BSOD'ed idle at 2.96ghz.. not very impressed
Primary Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4.5ghz Biostar Z68 HD6870 1GB @ 925/1125 RipJaw 8GB DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
AData 64GB Sandforce SSD Lite-On DVD+RW Windows 7 x64 Ultimate 32" 1080p LCD Monitor 
KeyboardPowerCaseMouse
Razer Lycosa Antec Earthwatts 750 Modular HAF 932 Razer Naga 
  hide details  
Reply
Primary Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 2500k @ 4.5ghz Biostar Z68 HD6870 1GB @ 925/1125 RipJaw 8GB DDR3 1600mhz 
Hard DriveOptical DriveOSMonitor
AData 64GB Sandforce SSD Lite-On DVD+RW Windows 7 x64 Ultimate 32" 1080p LCD Monitor 
KeyboardPowerCaseMouse
Razer Lycosa Antec Earthwatts 750 Modular HAF 932 Razer Naga 
  hide details  
Reply
post #10 of 12
I got mine stable @ 3.0ghz with my gigabyte EP35-D4L too:0 I got it for 44 from tigerdirect. It idles at 36 and 42 at loaded. My heatsink is Tuniq tower with Zalman 120MM Fan @800~1000 RPM.
The Toaster
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 3770K Shuttle SZ77R5 nVidia GTX 970 4GB Reference Design 16GB Crucial low profile DDR3 1600 
Hard DriveHard DriveOptical DriveOS
Samsung 850 Pro 256GB Samsung M9T 2TB LG Blu-ray Burner Windows 8.1 Professional 64Bit 
MonitorKeyboardMouseAudio
Dell Ultrasharp U2913WM  Corsair K65 Logitech Performance MX  B&W MM-1 
  hide details  
Reply
The Toaster
(14 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 3770K Shuttle SZ77R5 nVidia GTX 970 4GB Reference Design 16GB Crucial low profile DDR3 1600 
Hard DriveHard DriveOptical DriveOS
Samsung 850 Pro 256GB Samsung M9T 2TB LG Blu-ray Burner Windows 8.1 Professional 64Bit 
MonitorKeyboardMouseAudio
Dell Ultrasharp U2913WM  Corsair K65 Logitech Performance MX  B&W MM-1 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › E1200 @ 2.96ghz going good, then BSOD!