Overclock.net › Forums › Intel › Intel CPUs › Ram setting question...
New Posts  All Forums:Forum Nav:

Ram setting question...

post #1 of 2
Thread Starter 
Rig:

Mobo: IP 35 Pro
CPU: E7200 2.53ghz overclocked (stock heatsink/fan) to 3002mhz stable.
RAM: Corsair XMS2 Specs from newegg below
------------------------------------------------------------------
Brand CORSAIR
Series XMS2
Model TWIN2X2048-6400C4
Type 240-Pin DDR2 SDRAM
Tech Spec
Capacity 2GB (2 x 1GB)
Speed DDR2 800 (PC2 6400)
Cas Latency 4
Timing 4-4-4-12
Voltage 2.1V
Heat Spreader Yes
Features SLI certified
Recommend Use High Performance or Gaming Memory
Manufacturer Warranty
Parts Lifetime limited
Labor Lifetime limited
------------------------------------------------------------------

What should I have it set at? these are the readings from CPUID



In the bios I have :

DRAM Speed ( CPU : DRAM ) 1:1.25 (DDR2-790)

I have options for stuff like 1:1.50 (DDR2-948) and so on higher and higher...

I set the voltage manually myself to 2.1v and the CAS (tCL trD) etc to 4-4-4-12 as specified it can run at..... WHat should my DRAM speed be set at with this memory?

Ram MEMTEST86+ stable for 2 runs, memory seems fine....
post #2 of 2
Thread Starter 
sorry about that guys put this in the wrong section , woops Mod close this please...

Opened it in the right place: http://www.overclock.net/intel-memor...ml#post3986795


Again, sorry missclick
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Ram setting question...