Overclock.net › Forums › Components › Memory › Ram Settings Question...
New Posts  All Forums:Forum Nav:

Ram Settings Question...

post #1 of 3
Thread Starter 
Rig:

Mobo: IP 35 Pro
CPU: E7200 2.53ghz overclocked (stock heatsink/fan) to 3002mhz stable.
RAM: Corsair XMS2 Specs from newegg below
------------------------------------------------------------------
Brand CORSAIR
Series XMS2
Model TWIN2X2048-6400C4
Type 240-Pin DDR2 SDRAM
Tech Spec
Capacity 2GB (2 x 1GB)
Speed DDR2 800 (PC2 6400)
Cas Latency 4
Timing 4-4-4-12
Voltage 2.1V
Heat Spreader Yes
Features SLI certified
Recommend Use High Performance or Gaming Memory
Manufacturer Warranty
Parts Lifetime limited
Labor Lifetime limited
------------------------------------------------------------------

What should I have it set at? these are the readings from CPUID



In the bios I have :

DRAM Speed ( CPU : DRAM ) 1:1.25 (DDR2-790)

I have options for stuff like 1:1.50 (DDR2-948) and so on higher and higher...

I set the voltage manually myself to 2.1v and the CAS (tCL trD) etc to 4-4-4-12 as specified it can run at..... WHat should my DRAM speed be set at with this memory?

Ram MEMTEST86+ stable for 2 runs, memory seems fine....
post #2 of 3
If your stable at 1:1.25 4-4-4-12, then try 1:1.5 at the same timings. Run SuperPi (1M) and see if there is a speed difference. I suspect you can't lower your timings any more than 4-4-4-12. You might also ask at XS forum and abit forum's IP 35 Pro threads.
Cool Blue
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 EO @ 4.25 GHz Gigabyte EP45-UD3P Rev 1.1 9600 GSO(I'm a Folder not a Gamer) 2x2GB GSkill Pi 9600 5-5-5-15 1212 MHz 2.1v PL8 
Hard DriveOptical DriveMonitorPower
WD 500GB 7200 SATA 3 PIONEER DVD-RW 115DBK 20X Samsung SyncMaster 22in. Corsair 550VX 80PLUS 
Case
Antec 900 (4)12cm (1)20cm 
  hide details  
Reply
Cool Blue
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 EO @ 4.25 GHz Gigabyte EP45-UD3P Rev 1.1 9600 GSO(I'm a Folder not a Gamer) 2x2GB GSkill Pi 9600 5-5-5-15 1212 MHz 2.1v PL8 
Hard DriveOptical DriveMonitorPower
WD 500GB 7200 SATA 3 PIONEER DVD-RW 115DBK 20X Samsung SyncMaster 22in. Corsair 550VX 80PLUS 
Case
Antec 900 (4)12cm (1)20cm 
  hide details  
Reply
post #3 of 3
Thread Starter 
Quote:
Originally Posted by 18 is # 1 View Post
If your stable at 1:1.25 4-4-4-12, then try 1:1.5 at the same timings. Run SuperPi (1M) and see if there is a speed difference. I suspect you can't lower your timings any more than 4-4-4-12. You might also ask at XS forum and abit forum's IP 35 Pro threads.

Ok i'll try, thanks dude!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › Ram Settings Question...