post #1 of 1
Thread Starter 
Hello everyone,

So i updated bios from the xfx support site and i did it through the Ntune software. the update when smoothly untill i restarted my system. Now when the system is turned on it will show the xfx logo at start up and will not go into bios after. the board should a code of

4E (name:Init APIC Description: Initialize APIC and set MTRR).

Then i restarted it again and this time it when into the bios screen and read Warning on safe mode reset CPU and Memory in CMOS. The code this time was

52 (name: Memory test Description: Test all memory of memory above 1mb using Virtual 8086 mode, page mode and clear memory).

so i went into bios and left all my OC setting and then ran into windows. it was working for about 5 mins and the PC just shutdown. so i turned it back on and i got another code

7F (NameOST error check Description: Check post error and display them and ask for user intervention)


So i turned it one more time jump into BIOS and set everything to default and it went to windows no problem and did not shut-down on me...


so my concern is if i OC my PC again will it continue to show me error code... or what do i need to set for this to stop happening?

thank you for your support!
Edited by dan12288 - 6/10/08 at 10:47am
under contruction
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 GO @ 3.0ghz XFX 790I Ultra SLI XFX 8800 GT alpha dog OCZ SLI ready ddr3 1800 
Hard DriveOptical DriveOSMonitor
Seagate 7200.11 sata 2x(500gb) & 750gb Sony dvd/cd rom and Emprex dvd combo XP 32 bit Samsung 2253lw (21.6 inch) 
PowerCase
Thermaltake ToughPower 750W modular Antec 900 
  hide details  
Reply
under contruction
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 GO @ 3.0ghz XFX 790I Ultra SLI XFX 8800 GT alpha dog OCZ SLI ready ddr3 1800 
Hard DriveOptical DriveOSMonitor
Seagate 7200.11 sata 2x(500gb) & 750gb Sony dvd/cd rom and Emprex dvd combo XP 32 bit Samsung 2253lw (21.6 inch) 
PowerCase
Thermaltake ToughPower 750W modular Antec 900 
  hide details  
Reply