Overclock.net › Forums › Cooling › Air Cooling › Dual HR-05-Sli's on a 680i LT Sli are heating up!
New Posts  All Forums:Forum Nav:

Dual HR-05-Sli's on a 680i LT Sli are heating up!

post #1 of 25
Thread Starter 
My sig rig is getting a makeover! the Antec p182 is on the way, and I just popped on a couple of HR-05-SLi's



They are getting hot to the touch quick, and I was wondering what the safe operating temps/voltages are on this board? It is an EVGA 680i LT Sli with the XFX 680i P32 bios..

Right now it has an e6420 in it and the voltages and temps in bios are as follows:

CPU: 35c
Board: 33c
MCP: 46c
CPU core: 1.33v
CPU FSB: 1.48v
Memory: 2.00v
+3.3v: 3.28v
+3.3v Dual: 3.28v
+12v: 11.88v
+5v: 4.88v
+Vbat: 3.08v

I wanted a silent rig, so the less fans is better. Note... right now it is on a tabel under neath an overhead air conditioner about 10ft above it.

BTW: My 2nd Accelero will be here on the 16th!


Edited by bgbop15 - 6/13/08 at 7:57am
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
post #2 of 25
Thread Starter 
update: the e6420 failed in the 28th minute of the OCCT Auto30min stress test @ 3.5ghz (500x7)

Running same test now with 3.5ghz (437x8)
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
post #3 of 25
dude, you will need some fans, flip the true around 90 deg and pu a fan inbetween it and the nb so it sucks thru that and blows up out the fan in the roof of the 182.

i would also swap your gpu around so the stock fan is dragging air thru your sb too, on the plus side the case will let you put a fan on the back of the drive rack that will blow down your gpus from the power connecter end.
still frags n00bs
(13 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87 oc msi 290x gamer #996997 
Hard DriveCoolingOSMonitor
sandisk extreme 120 xspc raystorm winver 6.1 64 u QX2710LED 
KeyboardPowerMouse
knock off cherry reds 600w enermax volos 
  hide details  
Reply
still frags n00bs
(13 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87 oc msi 290x gamer #996997 
Hard DriveCoolingOSMonitor
sandisk extreme 120 xspc raystorm winver 6.1 64 u QX2710LED 
KeyboardPowerMouse
knock off cherry reds 600w enermax volos 
  hide details  
Reply
post #4 of 25
Thread Starter 
well, the video card swap would not be worth since my accellero is waiting at home for me!

I was thinking the same thing with the TRUE pointed up... but is that okay considering the weight? I would think having it parallel to the ground would put too much pressure on the board...
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
post #5 of 25
oh cool you are using the different bios! I am still using P09 or whatever it was that came out in January for our boards. I have to run mine at 1.43 volts to be solid at 3.2ghz.
Easy V3
(17 items)
 
12 Pack
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-4820k Asus Rampage IV BE evga 1080ti FE w/ hybrid kit 16 GB G.Skill Trident X 2400mhz  
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 120gb Samsung 840 EVO 1TB Samsung Blu-ray Corsair H110 
OSMonitorKeyboardPower
windows 10 Asus PG278Q Ducky Shine 3 - blue led - cherry mx browns Seasonic Platinum-1000 
CaseMouseMouse PadAudio
Dimastech Easy V3 Mionix NAOS 8200 Mionix Ensis 320 titanium HD  
Other
audio technica ATH-A900X 
  hide details  
Reply
Easy V3
(17 items)
 
12 Pack
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-4820k Asus Rampage IV BE evga 1080ti FE w/ hybrid kit 16 GB G.Skill Trident X 2400mhz  
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 120gb Samsung 840 EVO 1TB Samsung Blu-ray Corsair H110 
OSMonitorKeyboardPower
windows 10 Asus PG278Q Ducky Shine 3 - blue led - cherry mx browns Seasonic Platinum-1000 
CaseMouseMouse PadAudio
Dimastech Easy V3 Mionix NAOS 8200 Mionix Ensis 320 titanium HD  
Other
audio technica ATH-A900X 
  hide details  
Reply
post #6 of 25
Thread Starter 
yah i went to the xfx bios to try and figure out why this board could not run an e8400 at ANY speeds, but to no avail.. now i am back to my e6420 @ 400x8, 3.2ghz....


3DMark Vantage P7948 with 3.2ghz and 2x8800GT @ 725/1806/1040

Oh and I just put my other accelero on!
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
post #7 of 25
nice! see the bios I am running was for the 45nm chips so an E8400 should work on my board, too bad I don't have one to try it

I like the HR-05's on the north and south bridge that is tight!
Easy V3
(17 items)
 
12 Pack
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-4820k Asus Rampage IV BE evga 1080ti FE w/ hybrid kit 16 GB G.Skill Trident X 2400mhz  
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 120gb Samsung 840 EVO 1TB Samsung Blu-ray Corsair H110 
OSMonitorKeyboardPower
windows 10 Asus PG278Q Ducky Shine 3 - blue led - cherry mx browns Seasonic Platinum-1000 
CaseMouseMouse PadAudio
Dimastech Easy V3 Mionix NAOS 8200 Mionix Ensis 320 titanium HD  
Other
audio technica ATH-A900X 
  hide details  
Reply
Easy V3
(17 items)
 
12 Pack
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-4820k Asus Rampage IV BE evga 1080ti FE w/ hybrid kit 16 GB G.Skill Trident X 2400mhz  
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 120gb Samsung 840 EVO 1TB Samsung Blu-ray Corsair H110 
OSMonitorKeyboardPower
windows 10 Asus PG278Q Ducky Shine 3 - blue led - cherry mx browns Seasonic Platinum-1000 
CaseMouseMouse PadAudio
Dimastech Easy V3 Mionix NAOS 8200 Mionix Ensis 320 titanium HD  
Other
audio technica ATH-A900X 
  hide details  
Reply
post #8 of 25
Thread Starter 
well, got the p182, and it made matters much worse. Dont get me wrong, the case is a sexy beast, but i booted up tothe dekstop, then graphics corruption, then a bunch of restarts with freezing, etc. Now I am down to 1 8800gt, stock clocks, full fan speed, and I still cant get this thing to run through Vantage without freezing. The NB Heatsink is getting very hot to the touch, but I thought it could handle not having a fan right on it... any ideas?


Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
post #9 of 25
That is a nice case but not sure how good it is for air cooling. What kind of temps are you getting? You could definitley upgrade the case fans to some beastly silverstones or scythes and try to get more air moving in there and put a fan on the NB.
Easy V3
(17 items)
 
12 Pack
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-4820k Asus Rampage IV BE evga 1080ti FE w/ hybrid kit 16 GB G.Skill Trident X 2400mhz  
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 120gb Samsung 840 EVO 1TB Samsung Blu-ray Corsair H110 
OSMonitorKeyboardPower
windows 10 Asus PG278Q Ducky Shine 3 - blue led - cherry mx browns Seasonic Platinum-1000 
CaseMouseMouse PadAudio
Dimastech Easy V3 Mionix NAOS 8200 Mionix Ensis 320 titanium HD  
Other
audio technica ATH-A900X 
  hide details  
Reply
Easy V3
(17 items)
 
12 Pack
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-4820k Asus Rampage IV BE evga 1080ti FE w/ hybrid kit 16 GB G.Skill Trident X 2400mhz  
Hard DriveHard DriveOptical DriveCooling
Samsung 840 EVO 120gb Samsung 840 EVO 1TB Samsung Blu-ray Corsair H110 
OSMonitorKeyboardPower
windows 10 Asus PG278Q Ducky Shine 3 - blue led - cherry mx browns Seasonic Platinum-1000 
CaseMouseMouse PadAudio
Dimastech Easy V3 Mionix NAOS 8200 Mionix Ensis 320 titanium HD  
Other
audio technica ATH-A900X 
  hide details  
Reply
post #10 of 25
Thread Starter 
everestis telling me taht all my temps are under 37c, but i dont know who to believe!
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
Main Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 950 GA-X58a-UD3R 2 x XFX 5770 6gb 1600mhz corsair dominator 
Hard DriveOptical DriveOSMonitor
120gb OCZ Vertex2, 2 x 1tb WD Black Raid0 20x Pioneer DVD-DL/RW 7 x64 Dell U2410 
KeyboardPowerCaseMouse
Gateway PS/2 PCP&C Silencer 610 Antec P182 Gunmetal MS Wireless Pro (leather) 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › Dual HR-05-Sli's on a 680i LT Sli are heating up!