oh yha someone made a comment on my dog that avatar i put on . He is my true friend and rare but his breed is comming back just like AMD.
Plus he makes a good truck alarm there is not a person that won't walk way from my truck we he sits up and they notice him there. hey does his little growel not to warn them but telling them to come back to pet him but they just walk quicker .
Originally Posted by RonindeBeatrice
why did i do something wrong. I didn't put down anyone or thing I was explaining
so tonton if you go up with your speed 2.7 will give you better results then 2.8 but you goto get a little dirty and try some bus speeds i use AMD over drive to test settings I use 15 minute test intervals on stability tester and core temp .99 it is a good little program doesn't use much resources so you're test are more accurate and it will show by your clock. guru3d.com has it there some where.
you may use longer test intervals if it is hard for you a frist . during test watch temps this tells you alot what you're cpu is doing .the less it jumps around the better stream line you have and the more stable it will be . i degree jumps are not bad 2 or more up bring bus up 1 more mhz if that don't work up voltage 1 - 2 steps use arrow key better then mouse. you will notice it by jummping more or less but you have to watch jumps can be distance apart the more distance the better.
meaning behind this .when you cpu will miss a step it will try to keep up more work more heat.
my temp when up high will jump 1 degree up or down every 30 secs for about 2 minutes and will stop jumping when given or taken it away not bad and does the same at idel if it don't jump that is a sweet spot take note of it.
oh my temp idel 39c at 1.424 volts people would say I am lieing but that is what it is. and it will only go up 8-10 max on full load
so 2.99 ghz at 206 bus and 1.424 is and good sweet spot so i will try to keep that voltage and work around it until there is no other way but rais it.
My gold is to take this to 3.7 on air if I got to get a pure crossfire board i will only when I know for sure they half step
i did have at 3.3 past all test but when played cod4 it glitched a bit show me i was getting high temps look in log it prove it .