Hi I have a question about overclocking the E7200 on a GA-P35-DS3L board specifically. Please don't redirect me and link me elsewhere to any threads I would rather hear some examples or suggestions. I successfully overclocked my E7200 to 3.8GHz using a 400FSB and 9.5 multiplier at 1.33v. However, I need to know, since the GA-P35-DS3L board isn't meant to run at such a high FSB, should I raise the voltage on my G(MCH) or any other voltages for better stability? It seems to run fine now but I do feel it runs a bit heavy and I can't imagine running a FSB that isn't supported officially by the board without adding any voltage. Give some examples if you too have a E7200 and GA-P35-DS3L. Either way, any suggestions at all would be greatly appreciated.
post #1 of 5
6/19/08 at 11:59am